Bluetooth

From ArmadeusWiki
Revision as of 17:51, 8 April 2010 by JulienB (talk | contribs) (add table for tested hardware)
Jump to navigationJump to search

Page under construction... Informations on this page are not guaranteed !!

This page will give you all the informations needed to have a running Bluetooth configuration on your Armadeus board.

Hardware

First you have to get a compatible hardware. Currently there are 3 solutions:

  • Get a Wireless extension board from armadeus systems (only available for APF27)
  • Get a cheap USB<->Bluetooth adapter (requires an USB Host port)
  • Get a RS232<->Bluetooth adapter

Tested hardware

Model Status
APF9328 / APF27
Chipset Comments
Belkin - Mini Bluetooth Adapter TBT KO Product: BLUETOOTH USB +EDR ADAPTER v2.1 UHE
Manufacturer: Broadcom Corp
Trust TBT KO Product: BCM2046B1
Manufacturer: Broadcom
... KO NA

Software

Bluetooth Linux stack is divided into several parts:

  • kernel drivers
  • userland libraries/daemon (bluez)

Driver installation

  • (Done by default on APF27)
$ make linux26-menuconfig
[*] Networking support  --->
    <M>   Bluetooth subsystem support  --->
        --- Bluetooth subsystem support
            <M>   L2CAP protocol support 
            <M>   SCO links support
            <M>   RFCOMM protocol support
                [*]     RFCOMM TTY support
            <M>   BNEP protocol support
                [ ]     Multicast filter support (NEW)
                [ ]     Protocol filter support (NEW)
            <M>   HIDP protocol support
            Bluetooth device drivers  --->
                <M> HCI USB driver 
                < > HCI SDIO driver (NEW)
                <M> HCI UART driver
                    [*]   UART (H4) protocol support 
                    [*]   BCSP protocol support 
                    [ ]   HCILL protocol support (NEW)
                < > HCI BCM203x USB driver (NEW)
                < > HCI BPA10x USB driver (NEW)
                < > HCI BlueFRITZ! USB driver (NEW)
                < > HCI VHCI (Virtual HCI device) driver (NEW)
$ make

Bluez installation

$ make menuconfig
Package Selection for the target  --->
    ...
    [*] XML handling  --->
        [*]   libxml2
    ...
    [*] Hardware handling / blockdevices and filesystem maintenance  --->
        [*]   dbus
              XML library to use (libxml2)
    ...
    *** Armadeus specific packages ***
    [*] bluez
$ make

Links