Difference between revisions of "Tianma TM035"
From ArmadeusWiki
SebastienSz (Talk | contribs) m |
m (→Description) |
||
Line 1: | Line 1: | ||
==Description== | ==Description== | ||
− | This Tianma's LCD module | + | This Tianma's LCD module allow you to add a display and a touchscreen to your [[APF28Dev]]. |
− | Module flat cable can be used to connect the TM035 to the [[APF28Dev]]. LCD resolution: 320x240. | + | Module flat cable can be used to directly connect the TM035 to the [[APF28Dev]]. LCD resolution: 320x240. |
==How to enable Tianma TM035 support on recent kernel (3.19+)== | ==How to enable Tianma TM035 support on recent kernel (3.19+)== |
Revision as of 16:27, 13 July 2015
Contents
Description
This Tianma's LCD module allow you to add a display and a touchscreen to your APF28Dev.
Module flat cable can be used to directly connect the TM035 to the APF28Dev. LCD resolution: 320x240.
How to enable Tianma TM035 support on recent kernel (3.19+)
You have to edit the APF28Dev's device tree file. The file is buildroot/output/build/linux-XXX/arch/arm/boot/dts/imx28-apf28dev.dts .
- Find the following lines and modify them as the comment says:
... lcdif@80030000 { pinctrl-names = "default"; pinctrl-0 = <&lcdif_16bit_pins_a &lcdif_pins_apf28dev>; //display = <&st0700>; /* * To use the Tianma TM035 LCD comment the line above * and uncomment the line below. */ display = <&tm035>; status = "okay"; ...
- Rebuild the device tree
$ make linux-rebuild
- Copy the new dtb file (located in buildroot/output/images) in your tftpboot directory and update it on your board. In U-Boot:
BIOS> run update_dtb