Difference between revisions of "Use FTDI USB to TTL Serial cable for PC and APF direct connection"
From ArmadeusWiki
(New page: It is possible to avoid the use of a standard RS232 Null Modem cable to communicate between your Host and you APF, by using FTDI cables. ==Tested cables== * TTL-232R-3V3 with APF9328 (3,3...) |
(No difference)
|
Revision as of 17:25, 13 July 2009
It is possible to avoid the use of a standard RS232 Null Modem cable to communicate between your Host and you APF, by using FTDI cables.
Tested cables
- TTL-232R-3V3 with APF9328 (3,3V level on UARTs)
FTDI 6 pins connector | APF9328DevFull UART connector (X27) | |||
---|---|---|---|---|
1/Black | GND | -> | 6 | GND |
2/Brown | CTS# | -> | NC | NC |
2/Red | VCC | -> | NC | NC |
3/Orange | TX | -> | 3 | RX |
5/Yellow | RX | -> | 1 | TX |
6/Green | CTS# | -> | NC | NC |