Difference between revisions of "Quartus installation on Linux"

From ArmadeusWiki
Jump to: navigation, search
m (→‎Version 15.1 prime lite)
(→‎Version 19.1 prime lite)
 
(8 intermediate revisions by 2 users not shown)
Line 47: Line 47:
 
export PATH=$PATH:${ALTERAPATH}/quartus/bin
 
export PATH=$PATH:${ALTERAPATH}/quartus/bin
 
export PATH=$PATH:${ALTERAPATH}/nios2eds/bin
 
export PATH=$PATH:${ALTERAPATH}/nios2eds/bin
 +
export PATH=$PATH:${QSYS_ROOTDIR}
 
</source>
 
</source>
  
Line 72: Line 73:
 
{{Note| Quartus 15.1.1 with update 1 take about ~16GB once installed, but ~15 more GB are required for download/untar before installation}}
 
{{Note| Quartus 15.1.1 with update 1 take about ~16GB once installed, but ~15 more GB are required for download/untar before installation}}
  
−
Version 15.1 with update.
+
Version 15.1 with update (click on updates tab).
  
−
* Download the big archive with update 1 (7.6GB) on the [http://dl.altera.com/?edition=lite download center] (free Altera account needed):
+
* In '' Complete Download'' chapter, download the big archive with update 1 (7.6GB) on the [http://dl.altera.com/?edition=lite download center] (free Altera account needed):
 
<pre>
 
<pre>
 
Quartus-lite-15.1.1.189-linux.tar
 
Quartus-lite-15.1.1.189-linux.tar
Line 87: Line 88:
 
* Take a little coffee (~3 min)
 
* Take a little coffee (~3 min)
  
−
* Launch the installing setup :
+
* Launch the installation:
 
<pre class="host">
 
<pre class="host">
 
./setup.sh  
 
./setup.sh  
Line 98: Line 99:
  
 
<source lang="bash">
 
<source lang="bash">
−
export ALTERAPATH="/opt/quartus/altera/15.1/"
+
export ALTERAPATH="/directory/where/you/installed/quartus/"
 
export ALTERAOCLSDKROOT="${ALTERAPATH}/hld"
 
export ALTERAOCLSDKROOT="${ALTERAPATH}/hld"
 
export QUARTUS_ROOTDIR=${ALTERAPATH}/quartus
 
export QUARTUS_ROOTDIR=${ALTERAPATH}/quartus
 
export QUARTUS_ROOTDIR_OVERRIDE="$QUARTUS_ROOTDIR"
 
export QUARTUS_ROOTDIR_OVERRIDE="$QUARTUS_ROOTDIR"
 +
export QSYS_ROOTDIR="${ALTERAPATH}/quartus/sopc_builder/bin"
 
export PATH=$PATH:${ALTERAPATH}/quartus/bin
 
export PATH=$PATH:${ALTERAPATH}/quartus/bin
 
export PATH=$PATH:${ALTERAPATH}/nios2eds/bin
 
export PATH=$PATH:${ALTERAPATH}/nios2eds/bin
Line 114: Line 116:
 
$ quartus
 
$ quartus
 
</pre>
 
</pre>
 +
 +
== Version 19.1 prime lite ==
 +
 +
Installation process is mainly identical with this little fixes.
 +
 +
=== Perl Getopt::Long ===
 +
 +
When synthesize platform design (qsys) a perl error like this occure:
 +
<pre>
 +
... Can't locate Getopt/Long.pm in @INC ...
 +
</pre>
 +
 +
Apparently, the module is not installed for Intel embedded perl. To solve the problem, a solution is to use your perl installed in distribution.
 +
 +
But before, be sure that you have the getopt installed correctly :
 +
 +
<pre class="host">
 +
$ sudo apt install libgetopt-simple-perl
 +
</pre>
 +
 +
Then go to your Intel Quartus installation :
 +
<pre class="host">
 +
$ cd altera/19.1/quartus/linux64/perl/bin
 +
$ mv perl perl_old
 +
$ ln -s /usr/bin/perl
 +
</pre>
 +
 +
And relaunch your quartus project.
  
 
== Links ==
 
== Links ==

Latest revision as of 14:53, 12 November 2019

Introduction

Quartus web edition 14.0 is the software used to synthesize bitstream for Altera FPGAs. It's required for the cyclone V soldered on APF6SP.

Installation guide for version 14.0

Package needed

On debian jessie : 

sudo apt-get install libstdc++5 libmotif4 libxp6 libcurl3
# for 64 arch, install also 32bits packets:
sudo dpkg --add-architecture i386
sudo apt-get install libstdc++5:i386 libmotif4:i386 libxp6:i386 libcurl3:i386

Download

Download the big (4GB) quartus installer here (Use "download software web edition" button).

Uncompress and install

  • Untar the archive :
 tar -xvf Quartus-web-14.0.0.200-linux.tar
  • run the installer:
 bash setup.sh
  • follow the instructions to install it where you want.

configure .bashrc

Adding the path of your quartus in ~/.bashrc 

export ALTERAPATH="/opt/quartus/altera/14.0/"
export ALTERAOCLSDKROOT="${ALTERAPATH}/hld"
export QUARTUS_ROOTDIR=${ALTERAPATH}/quartus
export QUARTUS_ROOTDIR_OVERRIDE="$QUARTUS_ROOTDIR"
export PATH=$PATH:${ALTERAPATH}/quartus/bin
export PATH=$PATH:${ALTERAPATH}/nios2eds/bin
export PATH=$PATH:${QSYS_ROOTDIR}

Launch Quartus

To launch quartus, open a terminal and simply type : 

$ quartus

USB-Blaster

USB-BLaster is an USB JTAG adaptor usefull to debug altera FPGA. Under Linux some rights must be added to use it with quartus.

  • create an udev rules files in :
/etc/udev/rules.d/altera-usb-blaster.rules
  • And add following configuration :
ATTR{idVendor}=="09fb", ATTR{idProduct}=="6001", MODE="666"

Version 15.1 prime lite

Note Note: Quartus 15.1.1 with update 1 take about ~16GB once installed, but ~15 more GB are required for download/untar before installation


Version 15.1 with update (click on updates tab).

  • In Complete Download chapter, download the big archive with update 1 (7.6GB) on the download center (free Altera account needed):
Quartus-lite-15.1.1.189-linux.tar
  • Watch a good movie (min 2 hours)
  • Move the big archive in a directory with enough free space and untar it:
$ tar -xvf Quartus-lite-15.1.1.189-linux.tar
  • Take a little coffee (~3 min)
  • Launch the installation:
./setup.sh
  • follow the instructions to install it where you want
  • Take a big coffee or go to lunch (~30min)
  • Change your environment variables in your .bashrc:
export ALTERAPATH="/directory/where/you/installed/quartus/"
export ALTERAOCLSDKROOT="${ALTERAPATH}/hld"
export QUARTUS_ROOTDIR=${ALTERAPATH}/quartus
export QUARTUS_ROOTDIR_OVERRIDE="$QUARTUS_ROOTDIR"
export QSYS_ROOTDIR="${ALTERAPATH}/quartus/sopc_builder/bin"
export PATH=$PATH:${ALTERAPATH}/quartus/bin
export PATH=$PATH:${ALTERAPATH}/nios2eds/bin
Warning Warning: The altera installation script will edit your .bashrc file adding a line at the end.
export QUARTUS_ROOTDIR=...
If you add the lines above you can delete it. But if you have an esoteric language like french in some comments, the script will trash it


  • Run quartus in a new console and select prime software:
$ quartus

Version 19.1 prime lite

Installation process is mainly identical with this little fixes.

Perl Getopt::Long

When synthesize platform design (qsys) a perl error like this occure: 

... Can't locate Getopt/Long.pm in @INC ...

Apparently, the module is not installed for Intel embedded perl. To solve the problem, a solution is to use your perl installed in distribution.

But before, be sure that you have the getopt installed correctly : 

$ sudo apt install libgetopt-simple-perl

Then go to your Intel Quartus installation : 

$ cd altera/19.1/quartus/linux64/perl/bin
$ mv perl perl_old
$ ln -s /usr/bin/perl

And relaunch your quartus project.

Links

Retrieved from "https://www.armadeus.org/wiki/index.php?title=Quartus_installation_on_Linux&oldid=14853"