Difference between revisions of "Emdebian on APF"
(→Finalisation) |
m (→Issues, tips, misc...) |
||
Line 218: | Line 218: | ||
</pre> | </pre> | ||
Powering off/on (not just reset) solves the problem. I'm unable to say what is faulty, u-boot, hardware, other...? | Powering off/on (not just reset) solves the problem. I'm unable to say what is faulty, u-boot, hardware, other...? | ||
+ | |||
+ | * you can also boot embdebian through your network NFS shared connection: | ||
+ | cp -rp rootfs/* /tftpboot/apf28-root | ||
+ | |||
+ | For the first boot use | ||
+ | <pre class="apf"> | ||
+ | BIOS> setenv extrabootargs init=/first_boot.sh | ||
+ | BIOS> run nfsboot | ||
+ | </pre> | ||
+ | |||
+ | then after having succesfully deployed the embedebiqn distro: | ||
+ | <pre class="apf"> | ||
+ | BIOS> run nfsboot | ||
+ | </pre> | ||
==Links== | ==Links== |
Revision as of 14:24, 5 July 2012
Contents
Requirements
- An APF28 with its docking board.
- A PC running a Debian stable distribution (it can be in a chroot).
- A microSD card.
Preamble
This page describes how to install an Emdebian stable distribution on APF28. Emdebian is mainly a Debian without documentation (manpages,etc...), so it can fit on smaller storage devices but providing the same functionalities. One of the goals in this procedure is to use the Armadeus tools as less as possible. So you won't need to change anything in u-boot configuration and buildroot will only be used to fetch and patch the kernel. The latter could have been avoided but doing this way facilitates the choice of the kernel (2.6.35.3 or a 3.x one) and ensures all the patches are applied.
Emdebian is a work in progress and the cross-toolchains in unstable are often broken so we'll stay here in the stable branches (both Emdebian and Debian).
This procedure has been written for an APF28 but should be easily adapted for another board.
Preparation
- To avoid possible ownership issues in the generated files without sudoing (I'm a bit lazy, I agree, but I doubt God keeps an eye on me...):
$ sudo su
- Add emdebian tools repository to your sources.list. We'll need it to install the cross-toolchain for kernel compilation:
# echo 'deb http://www.emdebian.org/debian/ stable main' >> /etc/apt/sources.list
- Install needed packages:
# apt-get update # apt-get install multistrap uboot-mkimage g++-4.4-arm-linux-gnueabi
- multistrap will fetch the packages and build the rootfs.
- uboot-mkimage will be needed to build the final uImage.
- g++-4.4-arm-linux-gnueabi dependencies will install the whole cross-toolchain. Thanks apt :)
- Create an ext2 partition on the SD card:
# mkfs.ext2 /dev/sdc1
Building the rootfs
- Let's create a directory:
# mkdir apf # cd apf
Kernel
- Get an Armadeus working tree and apply configuration:
apf/# git clone git://armadeus.git.sourceforge.net/gitroot/armadeus/armadeus armadeus apf/# cd armadeus armadeus/# make apf28_defconfig
- Customise things you want to.
- Apply Armadeus patches:
armadeus/# export KDIR=$PWD/buildroot/output/build/linux-2.6.35.3 armadeus/# make $KDIR/.stamp_downloaded $KDIR/.stamp_extracted $KDIR/.stamp_patched
- Adjust KDIR depending on the kernel you chose at the preceding step.
- Copy default configuration:
armadeus/# cp buildroot/target/device/armadeus/apf28/apf28-linux-2.6.35.3.config $KDIR/.config
- Configure and compile the kernel:
armadeus/# cd $KDIR linux-2.6.35.3/# mkdir modout linux-2.6.35.3/# make INSTALL_MOD_PATH=$KDIR/modout ARCH=arm CROSS_COMPILE=/usr/bin/arm-linux-gnueabi- menuconfig uImage modules modules_install
- menuconfig can be omitted if you're happy with the default kernel configuration.
Now we have a kernel at $KDIR/arch/arm/boot/uImage and the modules under $KDIR/modout. Let's build the rootfs.
Multistrap
Multistrap does basically quite the same things than 'debootstrap --foreign', fetching packages from an emdebian repository, building a root tree and leaving packages unconfigured.
- Get back to the base directory:
linux-2.6.35.3/# cd ../../../../ apf28/#
- Create a config file for multistrap:
apf28/# cat > stable.config << EOF [General] arch=armel directory=rootfs cleanup=true noauth=false unpack=true debootstrap=Grip aptsources=Grip [Grip] packages= keyring=emdebian-archive-keyring source=http://www.emdebian.org/grip suite=stable EOF
- 'packages=' is a space separated list of additional packages.
- If you have issues with the archive keyring you can set 'noauth=true'
- Build:
apf28/# multistrap -f stable.config
- Copy the kernel and the modules:
apf28/# cp $KDIR/arch/arm/boot/uImage rootfs/boot/apf28-linux.bin apf28/# cp -r $KDIR/modout/lib rootfs/
- uImage is renamed to apf28-linux.bin so that u-boot can find it.
Finalisation
We're near the end.
- Set hostname:
apf28/# echo 'apf28' >> rootfs/etc/hostname
- Avoid some warnings:
apf28/# touch rootfs/etc/fstab
- Network configuration (address,netmask,etc...) will be inherited from u-boot, but we'll need these:
apf28/# echo '127.0.0.1 localhost' >> rootfs/etc/hosts apf28/# echo 'nameserver 192.168.0.1' >> rootfs/etc/resolv.conf
- Add emdebian repository:
apf28/# echo 'deb http://www.emdebian.org/grip/ stable main' >> rootfs/etc/apt/sources.list
- The very last step will occur onboard. Create a shell script to be executed at first boot:
apf28/# cat > rootfs/first_boot.sh << EOF #! /bin/sh set -e export PATH=/usr/sbin:/usr/bin:/sbin:/bin export DEBIAN_FRONTEND=noninteractive export DEBCONF_NONINTERACTIVE_SEEN=true export LC_ALL=C export LANGUAGE=C export LANG=C mount proc -t proc /proc # Workaround configuration of dash and bash failures # See http://lists.debian.org/debian-embedded/2011/11/msg00037.html mkdir -p /usr/share/man/man1 /var/lib/dpkg/info/dash.preinst # Configure packages dpkg --configure -a # Reset root password sed -i -e 's/root:\*:/root::/' /etc/shadow # Enable login through debug console echo 'T0:23:respawn:/sbin/getty -L ttyAM0 115200 vt100' >> /etc/inittab # Self delete rm $0 sync echo 'Done! You can reset the board.' while true; do echo '.\c' sleep 1 done EOF
- Make it executable:
apf28/# chmod +x rootfs/first_boot.sh
- Copy the rootfs on the SD:
apf28/# mkdir /mnt/sd apf28/# mount /dev/sdc1 /mnt/sd apf28/# cp -rp rootfs/* /mnt/sd apf28/# umount /mnt/sd
- Put the SD card into its placeholder, poweron the base board and interrupt the automatic boot. We need to tell the kernel it must launch first_boot.sh:
BIOS> setenv extrabootargs init=/first_boot.sh BIOS> run mmcboot
- update-alternative will complain about missing manpages. It can be ignored.
This should end-up with something like that:
Done! You can reset the board. ......
So...reset the board. To boot on emdebian, just get u-boot prompt and type:
BIOS> run mmcboot
To have it permanent:
BIOS> setenv bootcmd run mmcboot BIOS> saveenv
Issues, tips, misc...
- Sometimes u-boot fails to load the kernel
BIOS> run mmcboot mmc0 is current device Loading file "/boot/apf28-linux.bin" from mmc device 0:1 (xxa1) MMC0: Data timeout with command 18 (status 0xe03c2020)! ** ext2fs_devread read error - block ** Unable to read "/boot/apf28-linux.bin" from mmc 0:1 ** ## Booting kernel from Legacy Image at 40000000 ... Image Name: Linux-2.6.35.3 Created: 2012-07-02 14:05:13 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2714300 Bytes = 2.6 MiB Load Address: 40008000 Entry Point: 40008000 Verifying Checksum ... Bad Data CRC ERROR: can't get kernel image!
Powering off/on (not just reset) solves the problem. I'm unable to say what is faulty, u-boot, hardware, other...?
- you can also boot embdebian through your network NFS shared connection:
cp -rp rootfs/* /tftpboot/apf28-root
For the first boot use
BIOS> setenv extrabootargs init=/first_boot.sh BIOS> run nfsboot
then after having succesfully deployed the embedebiqn distro:
BIOS> run nfsboot