Difference between revisions of "DDR3-CycloneV interface description"
From ArmadeusWiki
(→General view) |
(→General view) |
||
| Line 34: | Line 34: | ||
{{Under_Construction}} | {{Under_Construction}} | ||
| + | * Diagram schematic: | ||
| + | |||
| + | [[File:imx6-cycloneV-ddr3.png|frame|center| DDR wiring diagram]] | ||
| + | |||
| + | * Route schematic: | ||
[[File:apf6_sp_ddr_sch.png|frame|center|DDR3 wiring for FPGA on apf6_sp]] | [[File:apf6_sp_ddr_sch.png|frame|center|DDR3 wiring for FPGA on apf6_sp]] | ||
Revision as of 15:05, 1 February 2016
Contents
Introduction
2 RAMs are connected to CycloneV's APF6_SP.
Parameters
- DDR3:
| part | MT41K128M16JT-125 |
| type | DDR3L |
| Speed | 750Mhz |
| timings | See verilog model provided by micron |
| JEDEC | JEDEC DDR3-1600 -> JEDEC DDR3-1G6 2GB x8 |
| Chip size | 2048Mbits -> 128M x 16bits |
General view
Page under construction...
Informations on this page are not guaranteed !!
- Diagram schematic:
DDR wiring diagram
- Route schematic:
DDR3 wiring for FPGA on apf6_sp
How to integrate DDR3 in Qsys
Page under construction...
Informations on this page are not guaranteed !!
Clock
The hard controller IP «DDR3 SDRAM Controller with UniPHY» require using and external oscillator to clock it. On APF6_SP, the all CycloneV fpga is clocked with the PCIe clock at 125Mhz by default.
To force Quartus to use the coreclkout as input clock for DDR3 controller a little hack must be done after HDL code is generated.
The DDR3 clock hack
 |
Note: If you include the .qsys under your Quartus project, Quartus will regenerate all the Qsys HDL/TCL code each times you synthesize your design, and will erase the modification. |
- Generate the design with Qsys
- Connect the pll_ref_clk of IP DDR3 SDRAM Controller with UniPHY on coreclkout of Avalon-MM Cyclone V Hard IP for PCI Express.
- Do all connections you need/want
- Generate the HDL code with Finish button.
- Under Quartus include the file your_project.qip and not your_project.qsys
- Find the file named *_p0_pin_map.tcl :
$ find . -name "*_p0_pin_map.tcl"
- It must be under directory named your_project/synthesis/submodules/
- Edit it and looking for line begining with :
proc YOUR_PROJECT_NAME_mem_if_ddr3_emif_0_p0_get_input_clk_id { pll_output_node_id } {
- Add this line at the begining of function :
return $pll_output_node_id
- Then synthesize all.
- Find the file named *_p0_pin_map.tcl :
| |
Note: In one line :$ find . -name "*_p0_pin_map.tcl" | xargs sed -iolt "/_mem_if_ddr3_emif_0_p0_get_input_clk_id {/a return \$pll_output_node_id"
|
IO
Pinout placement
set_location_assignment PIN_C11 -to mem_a[0]
set_location_assignment PIN_B11 -to mem_a[1]
set_location_assignment PIN_A8 -to mem_a[2]
set_location_assignment PIN_A7 -to mem_a[3]
set_location_assignment PIN_D11 -to mem_a[4]
set_location_assignment PIN_E11 -to mem_a[5]
set_location_assignment PIN_F8 -to mem_a[6]
set_location_assignment PIN_E7 -to mem_a[7]
set_location_assignment PIN_D9 -to mem_a[8]
set_location_assignment PIN_D8 -to mem_a[9]
set_location_assignment PIN_B6 -to mem_a[10]
set_location_assignment PIN_B5 -to mem_a[11]
set_location_assignment PIN_C8 -to mem_a[12]
set_location_assignment PIN_B8 -to mem_a[13]
set_location_assignment PIN_H6 -to mem_a[14]
set_location_assignment PIN_C9 -to mem_ba[2]
set_location_assignment PIN_C10 -to mem_ba[1]
set_location_assignment PIN_C6 -to mem_ba[0]
set_location_assignment PIN_A10 -to mem_cas_n[0]
set_location_assignment PIN_J9 -to mem_ck[0]
set_location_assignment PIN_J8 -to mem_ck_n[0]
set_location_assignment PIN_H8 -to mem_cs_n[0]
set_location_assignment PIN_C21 -to mem_dm[2]
set_location_assignment PIN_C19 -to mem_dm[1]
set_location_assignment PIN_A15 -to mem_dm[0]
set_location_assignment PIN_C20 -to mem_dq[23]
set_location_assignment PIN_B20 -to mem_dq[22]
set_location_assignment PIN_D18 -to mem_dq[21]
set_location_assignment PIN_E17 -to mem_dq[20]
set_location_assignment PIN_A22 -to mem_dq[19]
set_location_assignment PIN_A20 -to mem_dq[18]
set_location_assignment PIN_E16 -to mem_dq[17]
set_location_assignment PIN_D17 -to mem_dq[16]
set_location_assignment PIN_C18 -to mem_dq[15]
set_location_assignment PIN_B16 -to mem_dq[14]
set_location_assignment PIN_C16 -to mem_dq[13]
set_location_assignment PIN_C15 -to mem_dq[12]
set_location_assignment PIN_A17 -to mem_dq[11]
set_location_assignment PIN_B18 -to mem_dq[10]
set_location_assignment PIN_F15 -to mem_dq[9]
set_location_assignment PIN_E14 -to mem_dq[8]
set_location_assignment PIN_A14 -to mem_dq[7]
set_location_assignment PIN_C14 -to mem_dq[6]
set_location_assignment PIN_D13 -to mem_dq[5]
set_location_assignment PIN_C13 -to mem_dq[4]
set_location_assignment PIN_B13 -to mem_dq[3]
set_location_assignment PIN_B12 -to mem_dq[2]
set_location_assignment PIN_E12 -to mem_dq[1]
set_location_assignment PIN_F12 -to mem_dq[0]
set_location_assignment PIN_G15 -to mem_dqs[2]
set_location_assignment PIN_G14 -to mem_dqs_n[2]
set_location_assignment PIN_G12 -to mem_dqs[1]
set_location_assignment PIN_H12 -to mem_dqs_n[1]
set_location_assignment PIN_H9 -to mem_dqs[0]
set_location_assignment PIN_G8 -to mem_dqs_n[0]
set_location_assignment PIN_A13 -to mem_odt[0]
set_location_assignment PIN_B15 -to mem_cke[0]
set_location_assignment PIN_A9 -to mem_ras_n[0]
set_location_assignment PIN_E6 -to mem_we_n[0]
set_location_assignment PIN_B22 -to mem_reset_n
set_location_assignment PIN_A12 -to oct_rzqin
set_location_assignment PIN_T20 -to global_reset_n # Pulled-up on apf6sp
set_location_assignment PIN_H10 -to pll_ref_clk # Not Connected on apf6sp
set_location_assignment PIN_R16 -to soft_reset_n # Pulled-up on apf6sp
# Random pinout (not used)
set_location_assignment PIN_Y16 -to drv_status_fail
set_location_assignment PIN_H18 -to drv_status_pass
set_location_assignment PIN_V18 -to drv_status_test_complete
set_location_assignment PIN_J17 -to local_cal_fail
set_location_assignment PIN_J19 -to local_cal_success
set_location_assignment PIN_AA7 -to local_init_done
Technology pinout
set_instance_assignment -name IO_STANDARD "SSTL-135" -to oct_rzqin -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_dq[0] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name INPUT_TERMINATION "PARALLEL 40 OHM WITH CALIBRATION" -to mem_dq[0] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITH CALIBRATION" -to mem_dq[0] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_dq[1] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name INPUT_TERMINATION "PARALLEL 40 OHM WITH CALIBRATION" -to mem_dq[1] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITH CALIBRATION" -to mem_dq[1] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_dq[2] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name INPUT_TERMINATION "PARALLEL 40 OHM WITH CALIBRATION" -to mem_dq[2] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITH CALIBRATION" -to mem_dq[2] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_dq[3] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name INPUT_TERMINATION "PARALLEL 40 OHM WITH CALIBRATION" -to mem_dq[3] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITH CALIBRATION" -to mem_dq[3] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_dq[4] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name INPUT_TERMINATION "PARALLEL 40 OHM WITH CALIBRATION" -to mem_dq[4] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITH CALIBRATION" -to mem_dq[4] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_dq[5] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name INPUT_TERMINATION "PARALLEL 40 OHM WITH CALIBRATION" -to mem_dq[5] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITH CALIBRATION" -to mem_dq[5] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_dq[6] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name INPUT_TERMINATION "PARALLEL 40 OHM WITH CALIBRATION" -to mem_dq[6] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITH CALIBRATION" -to mem_dq[6] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_dq[7] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name INPUT_TERMINATION "PARALLEL 40 OHM WITH CALIBRATION" -to mem_dq[7] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITH CALIBRATION" -to mem_dq[7] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_dq[8] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name INPUT_TERMINATION "PARALLEL 40 OHM WITH CALIBRATION" -to mem_dq[8] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITH CALIBRATION" -to mem_dq[8] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_dq[9] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name INPUT_TERMINATION "PARALLEL 40 OHM WITH CALIBRATION" -to mem_dq[9] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITH CALIBRATION" -to mem_dq[9] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_dq[10] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name INPUT_TERMINATION "PARALLEL 40 OHM WITH CALIBRATION" -to mem_dq[10] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITH CALIBRATION" -to mem_dq[10] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_dq[11] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name INPUT_TERMINATION "PARALLEL 40 OHM WITH CALIBRATION" -to mem_dq[11] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITH CALIBRATION" -to mem_dq[11] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_dq[12] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name INPUT_TERMINATION "PARALLEL 40 OHM WITH CALIBRATION" -to mem_dq[12] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITH CALIBRATION" -to mem_dq[12] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_dq[13] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name INPUT_TERMINATION "PARALLEL 40 OHM WITH CALIBRATION" -to mem_dq[13] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITH CALIBRATION" -to mem_dq[13] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_dq[14] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name INPUT_TERMINATION "PARALLEL 40 OHM WITH CALIBRATION" -to mem_dq[14] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITH CALIBRATION" -to mem_dq[14] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_dq[15] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name INPUT_TERMINATION "PARALLEL 40 OHM WITH CALIBRATION" -to mem_dq[15] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITH CALIBRATION" -to mem_dq[15] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_dq[16] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name INPUT_TERMINATION "PARALLEL 40 OHM WITH CALIBRATION" -to mem_dq[16] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITH CALIBRATION" -to mem_dq[16] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_dq[17] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name INPUT_TERMINATION "PARALLEL 40 OHM WITH CALIBRATION" -to mem_dq[17] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITH CALIBRATION" -to mem_dq[17] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_dq[18] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name INPUT_TERMINATION "PARALLEL 40 OHM WITH CALIBRATION" -to mem_dq[18] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITH CALIBRATION" -to mem_dq[18] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_dq[19] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name INPUT_TERMINATION "PARALLEL 40 OHM WITH CALIBRATION" -to mem_dq[19] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITH CALIBRATION" -to mem_dq[19] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_dq[20] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name INPUT_TERMINATION "PARALLEL 40 OHM WITH CALIBRATION" -to mem_dq[20] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITH CALIBRATION" -to mem_dq[20] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_dq[21] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name INPUT_TERMINATION "PARALLEL 40 OHM WITH CALIBRATION" -to mem_dq[21] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITH CALIBRATION" -to mem_dq[21] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_dq[22] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name INPUT_TERMINATION "PARALLEL 40 OHM WITH CALIBRATION" -to mem_dq[22] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITH CALIBRATION" -to mem_dq[22] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_dq[23] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name INPUT_TERMINATION "PARALLEL 40 OHM WITH CALIBRATION" -to mem_dq[23] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITH CALIBRATION" -to mem_dq[23] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "DIFFERENTIAL 1.35-V SSTL" -to mem_dqs[0] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name INPUT_TERMINATION "PARALLEL 40 OHM WITH CALIBRATION" -to mem_dqs[0] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITH CALIBRATION" -to mem_dqs[0] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "DIFFERENTIAL 1.35-V SSTL" -to mem_dqs_n[0] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name INPUT_TERMINATION "PARALLEL 40 OHM WITH CALIBRATION" -to mem_dqs_n[0] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITH CALIBRATION" -to mem_dqs_n[0] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "DIFFERENTIAL 1.35-V SSTL" -to mem_dqs[1] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name INPUT_TERMINATION "PARALLEL 40 OHM WITH CALIBRATION" -to mem_dqs[1] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITH CALIBRATION" -to mem_dqs[1] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "DIFFERENTIAL 1.35-V SSTL" -to mem_dqs_n[1] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name INPUT_TERMINATION "PARALLEL 40 OHM WITH CALIBRATION" -to mem_dqs_n[1] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITH CALIBRATION" -to mem_dqs_n[1] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "DIFFERENTIAL 1.35-V SSTL" -to mem_dqs[2] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name INPUT_TERMINATION "PARALLEL 40 OHM WITH CALIBRATION" -to mem_dqs[2] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITH CALIBRATION" -to mem_dqs[2] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "DIFFERENTIAL 1.35-V SSTL" -to mem_dqs_n[2] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name INPUT_TERMINATION "PARALLEL 40 OHM WITH CALIBRATION" -to mem_dqs_n[2] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITH CALIBRATION" -to mem_dqs_n[2] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "DIFFERENTIAL 1.35-V SSTL" -to mem_ck[0] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITHOUT CALIBRATION" -to mem_ck[0] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "DIFFERENTIAL 1.35-V SSTL" -to mem_ck_n[0] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITHOUT CALIBRATION" -to mem_ck_n[0] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_a[0] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITHOUT CALIBRATION" -to mem_a[0] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_a[10] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITHOUT CALIBRATION" -to mem_a[10] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_a[11] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITHOUT CALIBRATION" -to mem_a[11] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_a[12] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITHOUT CALIBRATION" -to mem_a[12] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_a[13] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITHOUT CALIBRATION" -to mem_a[13] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_a[14] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITHOUT CALIBRATION" -to mem_a[14] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_a[1] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITHOUT CALIBRATION" -to mem_a[1] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_a[2] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITHOUT CALIBRATION" -to mem_a[2] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_a[3] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITHOUT CALIBRATION" -to mem_a[3] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_a[4] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITHOUT CALIBRATION" -to mem_a[4] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_a[5] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITHOUT CALIBRATION" -to mem_a[5] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_a[6] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITHOUT CALIBRATION" -to mem_a[6] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_a[7] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITHOUT CALIBRATION" -to mem_a[7] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_a[8] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITHOUT CALIBRATION" -to mem_a[8] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_a[9] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITHOUT CALIBRATION" -to mem_a[9] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_ba[0] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITHOUT CALIBRATION" -to mem_ba[0] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_ba[1] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITHOUT CALIBRATION" -to mem_ba[1] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_ba[2] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITHOUT CALIBRATION" -to mem_ba[2] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_cas_n[0] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITHOUT CALIBRATION" -to mem_cas_n[0] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_cke[0] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITHOUT CALIBRATION" -to mem_cke[0] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_cs_n[0] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITHOUT CALIBRATION" -to mem_cs_n[0] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_odt[0] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITHOUT CALIBRATION" -to mem_odt[0] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_ras_n[0] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITHOUT CALIBRATION" -to mem_ras_n[0] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_we_n[0] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITHOUT CALIBRATION" -to mem_we_n[0] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_reset_n -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITHOUT CALIBRATION" -to mem_reset_n -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_dm[0] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITH CALIBRATION" -to mem_dm[0] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_dm[1] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITH CALIBRATION" -to mem_dm[1] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to mem_dm[2] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name OUTPUT_TERMINATION "SERIES 40 OHM WITH CALIBRATION" -to mem_dm[2] -tag __ddr3_contr_example_if0_p0
set_instance_assignment -name IO_STANDARD "SSTL-135" -to pll_ref_clk -tag __ddr3_contr_example_if0_p0
