Difference between revisions of "Serial Transfer"

From ArmadeusWiki
Jump to: navigation, search
m (Introduction)
(Installation)
Line 17: Line 17:
 
and then rebuild your RootFS
 
and then rebuild your RootFS
 
  [user@toto]$ make
 
  [user@toto]$ make
Check that lrz and lsz executable are present in your RootFS and, if not, copy them to there:
+
Check that '''rz''' and '''sz''' executables are present in your RootFS and, if not, copy them to there:
  [user@toto]$ cp ./build_arm_nofpu/lrzsz-0.12.20/src/lsz ./build_arm_nofpu/root/usr/bin/
+
  [user@toto]$ cp ./build_arm_nofpu/lrzsz-0.12.20/src/lsz ./build_arm_nofpu/root/usr/bin/sz
 
end then rebuild your RootFS:
 
end then rebuild your RootFS:
 
  [user@toto]$ make
 
  [user@toto]$ make

Revision as of 23:27, 29 November 2007

Instructions to use the serial port of your Armadeus board to communicate with your PC

Introduction

When you only have a serial link (RS232/USB) as connection with your devt PC (ie no Ethernet available), then you can use Zmodem protocol to send/receive files to/from your Armadeus board.

Installation

  • Target:

Modify your Buildroot configuration:

[user@toto]$ make menuconfig

to add lrzsz package:
Menuconfig package.png

Menuconfig package net.png

and then rebuild your RootFS

[user@toto]$ make

Check that rz and sz executables are present in your RootFS and, if not, copy them to there:

[user@toto]$ cp ./build_arm_nofpu/lrzsz-0.12.20/src/lsz ./build_arm_nofpu/root/usr/bin/sz

end then rebuild your RootFS:

[user@toto]$ make
  • Host:

Install lrzsz package, if not already installed on your system. For example on Ubuntu/Debian:

[root@toto]# apt-get install lrzsz

Usage

You must use minicom as serial terminal and not kermit for the moment sorry ! :-(
Be sure to have correctly configured Minicom: line speed, 8N1, no control, and correct download/upload directories path.
After having booted your Armadeus system, launch lrz for receiving and lsz to send files:

  • Host --> Target
# cd /whereToPutTheFile/
# lrz -bZ

then in minicom do: Ctrl+A , s and choose zmodem protocol and the file to send.
Wait a little and your file will be copied to your board rootfs ! ;-)

  • Target --> Host
# lsz -b --zmodem filename

TBDL

Links