Difference between revisions of "Python development"

From ArmadeusWiki
Jump to: navigation, search
m (Installing modules)
m
Line 71: Line 71:
 
* [[Network_Configuration | NFS server installation]]
 
* [[Network_Configuration | NFS server installation]]
 
* [[MMC/SD | Connect a MMC/SD card to your APF board]]
 
* [[MMC/SD | Connect a MMC/SD card to your APF board]]
 
{{LanguageBar|Python_development|Développement python|Python}}
 
  
 
[[Category:Python]]
 
[[Category:Python]]
 
[[Category:Programming language]]
 
[[Category:Programming language]]
 
[[Category:Software]]
 
[[Category:Software]]

Revision as of 19:52, 1 August 2010

On this page you will learn how to create your first Python script for your Armadeus board. Python logo.png

Installation

  • Python interpreter and libraries are not installed in the default APF rootfs:
    • Currently it increases the rootfs size by 6 MBytes and so, without cleanup, it won't fit in the old APF9328 boards with 8 MBytes FLASH size. So for the moment, if you have an 8MB FLASH, you can only use it from a NFS or a MMC/SD rootfs. If your are a Python expert you can still delete some files in $ARMADEUS_ROOTFS/usr/lib/python2.4/... and tell us what isn't mandatory and uses a lot of space for nothing.
    • On the APF27, you can activate it without concerning about the FLASH size.
  • Python version installed by Buildroot is 2.4.
  • Launch Buildroot's menuconfig:
$ make menuconfig
  • In

Menuconfig package.png

Menuconfig package scripting.png
choose
Menuconfig package python.png

  • then save your configuration and rebuild your system:
$ make

Source code

  • First take your favorite editor/IDE and create the following script:
import sys
 
    print "APF says: Hello World ! ;-)"
    sys.exit(0)
  • Save it as hello.py

Compilation

Not needed. Transforming python script in executables hasn't been tested yet.

Running

  • Copy your hello.py script on your target through TFTP or NFS export dir or your MMC/SD
  • then on your APF console, launch it:
 # python hello.py
 APF says: Hello World ! ;-)
 #

Now it's up to you !! But keep in mind that Python is extremely powerful and libraries rich, so if you don't pay attention to memory usage of your scripts, you can easily reach the APF9328 RAM size limit: 16 MBytes. On the APF27, it will be much more difficult ;-).

Advanced usages

Disabling modules

Defaults python modules can be enabled/disabled by Buildroot menuconfig

Menuconfig package python.png

Installing modules

Default Python installation on Buildroot is "minimal"; for certain usage, it's necessary to install more modules. Here a list of modules tested on the APF9328 :

pyserial

This module is used to communicate through serial port (rs232). The package is really simple to install. Just download the module here [1] and unzip it on your board (or on nfs filesystem). Once uncompressed just type :

# python setup.py install

Under the pyserial directory. Once installed, this directory is no longer needed.

Links