OPOS6UL Linux kernel status

The OPOS6UL Linux distribution can be found here: latest stable installation tarball from SourceForge

Current version

Currently (2017.08) default supported Linux version for OPOS6UL in armadeus BSP is: vanilla 4.8.10. OPOS6UL have been mainlined in Linux from 4.11, so any kernel with higher version number should support this board.

We also support a "legacy" kernel, based on Freescale/NXP 4.1, to have PXP/ALSA functionnalities available until they are fully integrated in vanilla/mainline. Details about this kernel can be found here.

Details concerning the drivers usage can be found below.

• NT = Not Tested
• NA = Not Available / Not possible

OPOS6UL SOM

4.8.10
Driver	Compiling ? Static / Module		Working ?	Comments
eMMC	OK	NT	OK
SPI	OK	NT	OK	SPI
I2C	OK	NT	OK	I2C
Keypad	NT	NT	NT	Not tested yet
MMC/SD/SDIO	OK	NT	OK
UART	OK	NT	OK
Ethernet	OK	NT	OK
USB OTG	OK	NT	OK	USB
USB HOST1	OK	NT	OK	USB
PWM	OK	NT	OK	PWM
RTC	NT	NT	NT	i.MX6UL RTC
Watchdog	NT	NT	NT	Watchdog
PM sleep/wakeup	OK	NT	NT	Power management
Frequency scaling	OK	NT	NT	Not tested yet
CSI (Camera)	NA	NT	NT
SAI (Audio)	NA	NT	NT	ALSA
Security/Sahara/RTIC	NT	NT	NT	Not tested yet
Wi-Fi (b/g)	OK	OK	OK	Wi-Fi
Bluetooth	OK	OK	OK	Bluetooth / No RTS/CTS Bluetooth
PXP	NA	NT	NT	/dev/pxp_device
Xenomai	NT	NT	NT

OPOS6ULDev baseboard

• NT = Not Tested
• NA = Not Available / Not possible

imx_4.1.15_2.0.0_ga
Driver	Compiling ? Static / Module		Working ?	Comments
Ethernet	OK	NT	~OK
LCD	OK	NT	OK	Tested with LW700. LCD
Backlight	OK	NT	OK	Inverted polarity. New kernel API.
SPDIF audio Out	OK	NT	KO	ALSA
Touchscreen	OK	OK	OK	Single touch only.
USB Host 1	OK	NT	OK	High Speed
CAN Bus	OK	OK	OK	CAN_bus_Linux_driver
GPS	OK	NT	OK	GPS
GSM / 3G	OK	NT	OK	Gsm
GPIO	OK	NT	OK	GPIOlib
User LED	OK	NT	OK	GPIO LEDS
User button	OK	NT	OK	GPIO keys