Setup

On this page, you will find all the usefull informations you need to configure your Armadeus board for optimum usage.

• Screenshots: to show how the board is intented to normally run
• Cross Compiler: How to install Host(PC/MAC) Armadeus cross compiler software
• BootLoader: (U-Boot useful tips)
• InstallTargetSoftware: Install Armadeus software on target
• BootStrap: communicate and test your board when no software is installed on it
• FrameBuffer
• GPIO Driver
• Network Configuration: how to configure Host and Target network
• Serial Transfer: transfer files between your Host and your Armadeus board with the RS232 link
• USB Gadget -- Instructions to configure your Armadeus board to use it as a USB device (aka Gadget in Linux language)
• MultiMediaCard -- Instructions to use MMC/SD cards with your Armadeus board
• Digital to Analog Convertion: how to configure and use the DAC on your board

Just got your Armadeus board and want to start play with it ? Then follow this quick list to setup your envt accordingly:
1] Connect your APF to your development board or to a Devlight and power up it (9V)
2] Install the development environment on your computer (Host)
3] Connect your Host with your APF: