Use FTDI USB to TTL Serial cable for PC and APF direct connection
From ArmadeusWiki
Page under construction... Informations on this page are not guaranteed !!
It is possible to avoid the use of a standard RS232 Null Modem cable to communicate between your Host and you APF, by using FTDI cables.
Tested cables
- TTL-232R-3V3 with APF9328 (3,3V level on UARTs)
FTDI 6 pins connector | APF9328DevFull UART connector (X27) | |||
---|---|---|---|---|
1/Black | GND | -> | 6 | GND |
2/Brown | CTS# | -> | NC | NC |
2/Red | VCC | -> | NC | NC |
3/Orange | TX | -> | 3 | RX |
5/Yellow | RX | -> | 1 | TX |
6/Green | CTS# | -> | NC | NC |