Gstreamer
From ArmadeusWiki
Page under construction... Informations on this page are not guaranteed !!
Contents
Installation
$ make menuconfig
Package Selection for the target ---> Audio and video libraries and applications ---> ... [*] gstreamer [*] require libxml2 for registry and load/save -*- gst-plugins-base ---> [*] gst-plugins-good ---> [*] gst-plugins-bad ---> [*] gst-plugins-ugly --->
Plugins worth to activate:
- base:
- good:
- bad:
- ugly:
Usage
Check installed plugins
- To see all installed plugins:
# gst-inspect videoscale: videoscale: Video scaler queue2: queue2: Queue ffmpegcolorspace: ffmpegcolorspace: FFMPEG Colorspace converter audiorate: audiorate: Audio rate adjuster audioconvert: audioconvert: Audio converter audioresample: audioresample: Audio resampler volume: volume: Volume ...
- To have more details about one particular plugin (here alsasrc):
# gst-inspect alsasrc Factory Details: Long name: Audio source (ALSA) Class: Source/Audio Description: Read from a sound card via ALSA Author(s): Wim Taymans <wim@fluendo.com> Rank: primary (256) Plugin Details: Name: alsa Description: ALSA plugin library Filename: /usr/lib/gstreamer-0.10/libgstalsa.so Version: 0.10.25 License: LGPL Source module: gst-plugins-base Binary package: GStreamer Base Plug-ins source release Origin URL: Unknown package origin ... <cut>
Audio
- play a monotic tone to check your sound configuration is working (if not please configure ALSA):
# gst-launch audiotestsrc ! audioconvert ! audioresample ! alsasink Setting pipeline to PAUSED ... Pipeline is PREROLLING ... Pipeline is PREROLLED ... Setting pipeline to PLAYING ... New clock: GstAudioSinkClock
- play a music file (here a .ogg, supposing the libgstogg plugin was installed):
# gst-launch filesrc location=toto.ogg ! decodebin ! audioconvert ! audioresample ! alsasink
- record a sound from a mic (APF27 only) and store it as an uncompressed wav file:
# gst-launch alsasrc ! audioconvert ! audioresample ! wavenc ! filesink location=mic.wav
- record a sound from a mic (APF27 only) and compress it (ogg/worbis):
# gst-launch alsasrc ! audioconvert ! audioresample ! vorbisenc ! oggmux ! filesink location=mic.ogg
- record a sound from a mic (APF27 only) @ 8KHz (16KHz is too CPU consuming), compress it with Speex and send it to your Host (here 192.168.1.2) at port 6666:
# gst-launch -v alsasrc ! audioconvert ! audioresample ! 'audio/x-raw-int,rate=8000,width=16,channels=1' ! speexenc ! rtpspeexpay ! udpsink host=192.168.1.2 port=6666
$ gst-launch udpsrc port=6666 caps="application/x-rtp, media=(string)audio, clock-rate=(int)16000, encoding-name=(string)SPEEX, encoding-params=(string)1, payload=(int)110" ! gstrtpjitterbuffer ! rtpspeexdepay ! speexdec ! audioconvert ! audioresample ! autoaudiosink
$ gst-launch udpsrc port=6666 caps="application/x-rtp, media=(string)audio, clock-rate=(int)16000, encoding-name=(string)SPEEX, encoding-params=(string)1, payload=(int)110" ! gstrtpjitterbuffer ! rtpspeexdepay ! speexdec ! audioconvert ! audioresample ! wavenc ! filesink location=toto.wav
Video
Plugins
- You'll need to activate a few plugins in Buildroot menuconfig to play videos with Gstreamer:
Package Selection for the target ---> Audio and video libraries and applications ---> ... -*- gst-plugins-base ---> [*] ffmpegcolorspace (mandatory for video playback) ... [*] playback (mandatory) [*] gst-plugins-good ---> [*] videobox [*] videocrop [*] gst-plugins-bad ---> [*] fbdev
Test installation
- To test your Gstreamer installation, you need to select a plugin in Buildroot menuconfig:
Package Selection for the target ---> Audio and video libraries and applications ---> ... -*- gst-plugins-base ---> [*] videotestsrc
- Then on your APF system, launch the following command:
# gst-launch -v videotestsrc ! videocrop top=42 left=1 right=4 bottom=0 ! fbdevsink
You must see a pattern displayed on the screen if your Gstreamer installation is working well.
Play video
MPEG 1/2
- If you want to play MPEG 1/2 video, you have to install some plugins in Buildroot menuconfig:
Package Selection for the target ---> Audio and video libraries and applications ---> ... [*] gst-plugins-bad ---> [*] mpegdemux [*] mpegtsmux [*] mpeg4videoparse [*] mpegvideoparse [*] gst-plugins-ugly ---> [*] mpegaudioparse [*] mpegstream
With FFmpeg decoder
- In Buildroot menuconfig, select:
Package Selection for the target ---> Audio and video libraries and applications ---> ... -*- ffmpeg ---> ... [*] gst-ffmpeg
- On your APF system, play the video with the command:
# gst-launch filesrc location=VIDEO_FILE_LOCATION ! mpegdemux ! ffdec_mpegvi deo ! ffmpegcolorspace ! fbdevsink
With mpeg2dec decoder
- In Buildroot menuconfig, select:
Package Selection for the target ---> Audio and video libraries and applications ---> ... [*] gst-plugins-ugly ---> [*] mpeg2dec
- On your APF system, play the video with the command:
# gst-launch filesrc location=Pixar_For_the_Birds.mpg ! mpegdemux ! mpeg2dec ! f fmpegcolorspace ! fbdevsink