CAN bus Linux driver

From ArmadeusWiki
Revision as of 15:00, 12 July 2008 by Salocin68 (Talk | contribs)

Jump to: navigation, search

Forewords PRELIMINARY VERSION, WORK IN PROGRESS

The current CAN bus driver uses SocketCAN API which is now the official CAN API for Linux.

SocketCAN is based on the linux socket. Further details can be found on the links at the bottom of this page.

Driver Installation

$ make linux-menuconfig
in Device Drivers  ---> SPI support  --->  select <M> Freescale iMX SPI controller as module
in Networking  --->  select <M>   CAN bus subsystem support  as module
in Networking  ---> CAN bus subsystem support -->  select <M> Raw CAN Protocol  as module
in Networking  ---> CAN bus subsystem support -->  select <M> Broadcast Manager CAN Protocol  as module
in Networking  ---> CAN bus subsystem support --> CAN Device Drivers -->  select <M> Virtual Local CAN Interface  as module
in Networking  ---> CAN bus subsystem support --> CAN Device Drivers -->  select <M> Microchip 251x series SPI CAN Controller  as module


Usage

  • load all the needed drivers:
insmod /lib/modules/drivers/spi/spi_imx.ko
insmod /lib/modules/2.6.23.1/kernel/net/can/can.ko
insmod /lib/modules/2.6.23.1/kernel/net/can/candev.ko
insmod /lib/modules/2.6.23.1/kernel/net/can/can-raw.ko
insmod /lib/modules/2.6.23.1/kernel/drivers/net/can/mcp251x.ko

Quick test

Once the driver installed, the CAN interface has to be started like a standard net interface

ifconfig can0 up

and can be stopped like that:

ifconfig can0 down

The socketCAN version can be retrieved like that:

cat /proc/net/can/version

The socketCAN statistics can be retrieved like that:

cat /proc/net/can/stats

Several tools are provided by socketCAN:

candump: dump traffic on a CAN network
cansend: simple command line tool to send CAN-frames via CAN_RAW sockets
cangen: CAN frames generator for testing purpose
canplayer: send CAN frames from a file to a CAN interface

These tools can be compiled and installed on the target by means of the buildroot menuconfig:

$ make menuconfig
-> TO BE DONE


Links