Difference between revisions of "APF27Dev"
From ArmadeusWiki
(→Errata) |
|||
| Line 12: | Line 12: | ||
** Solution: remove R43 and connect pin PD/A0 (23) to GND. You can place a short circuit over C76. | ** Solution: remove R43 and connect pin PD/A0 (23) to GND. You can place a short circuit over C76. | ||
** Consequence: the AD9889 can no more be placed in low power mode by hardware. | ** Consequence: the AD9889 can no more be placed in low power mode by hardware. | ||
| + | |||
=Resources= | =Resources= | ||
| Line 17: | Line 18: | ||
* schematics: http://www.armadeus.com/_downloads/apf27Dev/hardware/apf27_devfull_12.pdf | * schematics: http://www.armadeus.com/_downloads/apf27Dev/hardware/apf27_devfull_12.pdf | ||
* datasheet: http://www.armadeus.com/_downloads/apf27Dev/documentation/DataSheet_APF27Dev.pdf | * datasheet: http://www.armadeus.com/_downloads/apf27Dev/documentation/DataSheet_APF27Dev.pdf | ||
| + | |||
=Feature list= | =Feature list= | ||
Revision as of 19:02, 23 September 2010
Contents
Description
This is the Armadeus System's standard development board/baseboard for the APF27 module.
The following options are only populated on the "Full" version (APF27DevFull):
Errata
- The DVI/HDMI may not work correctly: due to a harware issue on the Powerdown pin of the AD9889, the component may not work as expected.
- Solution: remove R43 and connect pin PD/A0 (23) to GND. You can place a short circuit over C76.
- Consequence: the AD9889 can no more be placed in low power mode by hardware.
Resources
- product page: http://www.armadeus.com/english/products-development_boards-apf27_dev.html
- schematics: http://www.armadeus.com/_downloads/apf27Dev/hardware/apf27_devfull_12.pdf
- datasheet: http://www.armadeus.com/_downloads/apf27Dev/documentation/DataSheet_APF27Dev.pdf
Feature list
Audio
VideoVideo OutVideo In |
User InputWired communication
Storage |
ReatimeOther
FPGA |
