Difference between revisions of "APF27 PPS"

From ArmadeusWiki
Jump to: navigation, search
m (Description)
(SSH terminal)
Line 27: Line 27:
  
 
{{Note|You can also use the PPS test scripts located in ''/usr/local/pps/scripts'' on the system to test some software functionalities.}}
 
{{Note|You can also use the PPS test scripts located in ''/usr/local/pps/scripts'' on the system to test some software functionalities.}}
 +
 +
==SSH terminal==
 +
The APF27 PPS filesystem is configured to enable SSH connection from a host computer.
 +
It allows you to access a command terminal of the system through the Ethernet ports.
 +
 +
* The default connection informations are:
 +
** '''IP address''': 192.168.0.10
 +
** '''Login''': guest
 +
** '''Password''': armadeus
 +
 +
* Then you can connect to your system by running the following command on your host:
 +
<pre class="host">
 +
$ ssh guest@192.168.0.10
 +
</pre>
 +
 +
* For more details, refer to the [[SSH#Dropbear|SSH - Dropbear page] in the Wiki.
  
 
==Feature list==
 
==Feature list==

Revision as of 14:10, 7 January 2011

Description

PPS is an Armadeus System's baseboard for the APF27 module. It can be used to implement and securize network applications such as routers and gateways.

Front side, you can see dual Ethernet, USB 2.0 Host & OTG, WiFi Antenna, extension connector footprint and power supply
Back side, with an APF27 module plugged-in

Resources

Software features

There are some network applications/features that are preselected in the PPS baseboard default configuration:

Note Note: You can also use the PPS test scripts located in /usr/local/pps/scripts on the system to test some software functionalities.


SSH terminal

The APF27 PPS filesystem is configured to enable SSH connection from a host computer. It allows you to access a command terminal of the system through the Ethernet ports.

  • The default connection informations are:
    • IP address: 192.168.0.10
    • Login: guest
    • Password: armadeus
  • Then you can connect to your system by running the following command on your host:
 $ ssh guest@192.168.0.10
  • For more details, refer to the [[SSH#Dropbear|SSH - Dropbear page] in the Wiki.

Feature list

Wired communication

Wireless communication

Other

FPGA