Difference between revisions of "Communicate"
m (→TFTP server) |
m |
||
| Line 1: | Line 1: | ||
| + | <noinclude> | ||
How-To connect your Armadeus board to your development Host. | How-To connect your Armadeus board to your development Host. | ||
| Line 5: | Line 6: | ||
As you will have to transfer some mega bytes of data, the Ethernet link is mandatory.<br> | As you will have to transfer some mega bytes of data, the Ethernet link is mandatory.<br> | ||
In order to use these two media with the APF target a terminal emulator (for RS232 link) and a TFTP server (for Ethernet link) have to be configured. | In order to use these two media with the APF target a terminal emulator (for RS232 link) and a TFTP server (for Ethernet link) have to be configured. | ||
| − | + | </noinclude> | |
At this stage, you should have something looking like that (IP addresses may change):<br><br> | At this stage, you should have something looking like that (IP addresses may change):<br><br> | ||
[[Image:BoardConnection.png]] | [[Image:BoardConnection.png]] | ||
Revision as of 16:55, 15 May 2009
How-To connect your Armadeus board to your development Host.
Contents
Forewords
The default connection uses a simple RS232 Null-Modem cable (with or without USB<->serial adapter).
As you will have to transfer some mega bytes of data, the Ethernet link is mandatory.
In order to use these two media with the APF target a terminal emulator (for RS232 link) and a TFTP server (for Ethernet link) have to be configured.
At this stage, you should have something looking like that (IP addresses may change):
RS232 Terminal configuration
You will need a RS232 terminal emulator to communicate with U-Boot/Linux console. You can choose between:
- Kermit
- Minicom
- GtkTerm
We suggest you to use Kermit as Terminal emulator for RS232 connection. Minicom was sadly reported to have problems when communicating with U-Boot (ZModem data transfer). If you just need a simple serial console and not to transfer data through RS232, then GTKTerm is the perfect choice ! (gtkterm package in Ubuntu)
 |
Note: Your terminal should now be configured with: 115200 bauds 8N1 parameters |
TFTP server
In order to send your image files (U-Boot, Linux, rootfs or FPGA's firmware) at higher speed (than serial port) to your Armadeus board, you can use the Ethernet link and a TFTP server. Once the server configured, the files located in the server shared directory (/tftpboot by default) will be accessible from the U-Boot/Linux TFTP clients.
TFTP server installation
- On *Ubuntu / Debian:
[ ] $ sudo apt-get install tftpd xinetd
or use Synaptic
- On Fedora:
[ ] $ rpm -q tftpd xinetd
- Then create the directory that will contain all the files that the server will export (root privileges needed):
[ ] $ sudo mkdir /tftpboot [ ] $ sudo chmod 777 /tftpboot
Server configuration
- Edit or create the configuration file /etc/xinetd.d/tftp and modify/add it the following lines:
# default: off
# description: The tftp server serves files using the trivial file transfer
# protocol. The tftp protocol is often used to boot diskless
# workstations, download configuration files to network-aware printers,
# and to start the installation process for some operating systems.
service tftp
{
socket_type = dgram
protocol = udp
wait = yes
user = root
server = /usr/sbin/in.tftpd
server_args = -s /tftpboot
# disable = yes
}
- Restart xinetd service:
[ ] $ sudo killall -HUP xinetd
For more information regarding how-to setup a tftp server please check one of many web how-to:
- TFTP server quick how-to
- Another how-to configure a TFTP Server for Linux
- till another how-to...
- ubuntu TFTP server documentation in French
