Communicate

From ArmadeusWiki
Revision as of 20:02, 4 November 2007 by JulienB (Talk | contribs) (Connection Setup)

Jump to: navigation, search

How-To connect your Armadeus board to your development Host.

Forewords

The default connection uses a simple RS232 link (Null-Modem cable).
Note: if your Armadeus board is equipped with an ethernet controller, it can be used to speed up the Linux and RootFS images download.
At this stage, you should have something like that:
BoardConnection.png

Connection Setup

A Terminal emulator (for RS232 link) and a TFTP server (for ethernet link) have to be configured, depending on your Host operating system:

Linux

Connection with U-Boot on Linux

Window$

Connection with U-Boot on Window$

U-Boot communication

  • Verify that your RS232 cable is correctly connected
  • The bootstrap jumper must be removed
  • Start the RS232 software on the host side
  • Reset the board
  • U-Boot must start

here is a screenshot of what you will see during the linux boot screenshot