Difference between revisions of "Talk:Libertas driver"
From ArmadeusWiki
(creation) |
|||
| Line 10: | Line 10: | ||
[*] Enable full debugging output in the Libertas module. | [*] Enable full debugging output in the Libertas module. | ||
</pre> | </pre> | ||
| + | |||
| + | ===Firmware (manual install)=== | ||
| + | These firmware can be manually downloaded and installed: | ||
| + | * get them from David's Woodhouse linux-firmware git repository: | ||
| + | <pre class="host"> | ||
| + | $ cd somewhere_with_free_space/ | ||
| + | $ git clone git://git.kernel.org/pub/scm/linux/kernel/git/dwmw2/linux-firmware.git linux-firmware_git | ||
| + | </pre> | ||
| + | * copy them (version v8) to you TFTP directory (here ''/tftpboot/''): | ||
| + | <pre class="host"> | ||
| + | $ cp linux-firmware_git/libertas/sd8686_v8.bin /tftpboot/ | ||
| + | $ cp linux-firmware_git/libertas/sd8686_v8_helper.bin /tftpboot/ | ||
| + | </pre> | ||
| + | * install them on your target (here 192.168.1.2 is my Host IP address): | ||
| + | <pre class="apf"> | ||
| + | # mkdir -p /lib/firmware/ | ||
| + | # cd /lib/firmware/ | ||
| + | # tftp -g -r sd8686_v8.bin -l sd8686.bin 192.168.1.2 | ||
| + | # tftp -g -r sd8686_v8_helper.bin -l sd8686_helper.bin 192.168.1.2 | ||
| + | # ls -al /lib/firmware/ | ||
| + | drwxr-xr-x 2 root root 0 Jan 1 01:01 . | ||
| + | drwxr-xr-x 4 root root 0 Dec 30 2009 .. | ||
| + | -rw-r--r-- 1 root root 122800 Jan 1 01:00 sd8686.bin | ||
| + | -rw-r--r-- 1 root root 2464 Jan 1 01:01 sd8686_helper.bin | ||
| + | </pre> | ||
| + | |||
| + | {{Note| You can also try official firmwares got at Marvell website (see Links above)}} | ||
Latest revision as of 14:07, 21 January 2014
Linux config
Device Drivers --->
[*] Network device support
Wireless LAN --->
[*] Wireless LAN (IEEE 802.11)
<M> Marvell 8xxx Libertas WLAN driver support
< > Marvell Libertas 8388 USB 802.11b/g cards (NEW)
<M> Marvell Libertas 8385 and 8686 SDIO 802.11b/g cards
[*] Enable full debugging output in the Libertas module.
Firmware (manual install)
These firmware can be manually downloaded and installed:
- get them from David's Woodhouse linux-firmware git repository:
$ cd somewhere_with_free_space/ $ git clone git://git.kernel.org/pub/scm/linux/kernel/git/dwmw2/linux-firmware.git linux-firmware_git
- copy them (version v8) to you TFTP directory (here /tftpboot/):
$ cp linux-firmware_git/libertas/sd8686_v8.bin /tftpboot/ $ cp linux-firmware_git/libertas/sd8686_v8_helper.bin /tftpboot/
- install them on your target (here 192.168.1.2 is my Host IP address):
# mkdir -p /lib/firmware/ # cd /lib/firmware/ # tftp -g -r sd8686_v8.bin -l sd8686.bin 192.168.1.2 # tftp -g -r sd8686_v8_helper.bin -l sd8686_helper.bin 192.168.1.2 # ls -al /lib/firmware/ drwxr-xr-x 2 root root 0 Jan 1 01:01 . drwxr-xr-x 4 root root 0 Dec 30 2009 .. -rw-r--r-- 1 root root 122800 Jan 1 01:00 sd8686.bin -rw-r--r-- 1 root root 2464 Jan 1 01:01 sd8686_helper.bin
 |
Note: You can also try official firmwares got at Marvell website (see Links above) |
