Difference between revisions of "U-Boot communication quick check"
From ArmadeusWiki
(New page: ==U-Boot communication quick check== * Verify that your RS232 cable is correctly connected * The bootstrap jumper must be removed * Start the RS232 terminal on t...) |
(No difference)
|
Revision as of 18:18, 2 March 2009
U-Boot communication quick check
- Verify that your RS232 cable is correctly connected
- The bootstrap jumper must be removed
- Start the RS232 terminal on the Host side (115200 bauds 8N1)
- Reset the board
- U-Boot must start
Here is a screenshot of what you will see on your Terminal emulator during the Linux boot.