Difference between revisions of "USB to WiFi adapter"

From ArmadeusWiki
Jump to: navigation, search
m
(→‎Tested hardware)
Line 4: Line 4:
 
{{Note| You have to be sure that [[Wireless Tools]] are installed on your rootfs before going further.}}
 
{{Note| You have to be sure that [[Wireless Tools]] are installed on your rootfs before going further.}}
  
−
==Tested hardware ==
+
==Tested hardware==
−
=== Ralink RT2571WF ===
+
{| border="1" cellpadding="5" cellspacing="0" summary="microSDs"
 +
|- style="background:#efefef;"
 +
! rowspan="2" | '''Constructor''' || rowspan="2" | '''Model''' || colspan="4" | '''Status''' || rowspan="2" | '''Chipset'''
 +
|----- style="background:#efefef;"
 +
| '''APF9328''' || '''APF27''' || '''APF51''' || '''APF28'''
 +
|----------------
 +
| rowspan="2" | '''D-Link''' || [http://www.ldlc.com/fiche/PB00023863.html DWL-G122] '''(not rev E1 !)''' || NT || style="background:#00ff00;" | working || NT || NT  || rowspan="2" | Ralink RT2571WF
 +
|----------------
 +
| D-Link WPA-110 || NT || style="background:#00ff00;" | working || NT || NT
 +
|----------------
 +
| '''SMC''' || WUSB-G || NT || style="background:#00ff00;" | working || NT || NT || ZyDas zd1212
 +
|}
 +
 
 +
==Ralink RT2571WF==
 
The RT2571WF Wi-Fi chipset can be found in the following devices:
 
The RT2571WF Wi-Fi chipset can be found in the following devices:
 
* [http://www.ldlc.com/fiche/PB00023863.html D-Link DWL-G122] '''(not rev E1 !)'''
 
* [http://www.ldlc.com/fiche/PB00023863.html D-Link DWL-G122] '''(not rev E1 !)'''
Line 14: Line 27:
 
To use it with [[APF9328]], you need an [[APF9328DevFull]] development board (with USB Host).
 
To use it with [[APF9328]], you need an [[APF9328DevFull]] development board (with USB Host).
  
−
==== Kernel configuration ====
+
===Kernel configuration===
  
 
* First, to use a USB dongle, USB Host must be configured. (Nothing to do on APF27, see [[ISP1761_Linux_driver|this page]] to know how to do with the [[APF9328DevFull]]).
 
* First, to use a USB dongle, USB Host must be configured. (Nothing to do on APF27, see [[ISP1761_Linux_driver|this page]] to know how to do with the [[APF9328DevFull]]).
Line 34: Line 47:
 
</pre>
 
</pre>
  
−
==== Wi-Fi configuration ====
+
===Wi-Fi configuration===
  
 
First mount the module:
 
First mount the module:
Line 52: Line 65:
 
Your Wi-Fi module driver is ready, you can now connect the dongle and after go further with the [[WiFi|Wi-Fi configuration]].
 
Your Wi-Fi module driver is ready, you can now connect the dongle and after go further with the [[WiFi|Wi-Fi configuration]].
  
−
=== ZyDas zd1212 chipset ===  
+
==ZyDas zd1212 chipset==  
 
* Tested with SMC WUSB-G (which is in [http://www.linuxwireless.org/en/users/Drivers/zd1211rw/devices the compatibility list]).
 
* Tested with SMC WUSB-G (which is in [http://www.linuxwireless.org/en/users/Drivers/zd1211rw/devices the compatibility list]).
 
**[http://www.ldlc.com/fiche/PB00067971.html Go here to buy this device in France (LDLC)]
 
**[http://www.ldlc.com/fiche/PB00067971.html Go here to buy this device in France (LDLC)]

Revision as of 22:21, 22 July 2012

How-to use USB to Wi-Fi adapters on your APF boards.

Prerequesities

Note Note: You have to be sure that Wireless Tools are installed on your rootfs before going further.


Tested hardware

Constructor Model Status Chipset
APF9328 APF27 APF51 APF28
D-Link DWL-G122 (not rev E1 !) NT working NT NT Ralink RT2571WF
D-Link WPA-110 NT working NT NT
SMC WUSB-G NT working NT NT ZyDas zd1212

Ralink RT2571WF

The RT2571WF Wi-Fi chipset can be found in the following devices:

Drivers are included in Linux kernel > 2.6.29, but firmware must be downloaded from serialmonkey website at this address.

To use it with APF9328, you need an APF9328DevFull development board (with USB Host).

Kernel configuration

  • First, to use a USB dongle, USB Host must be configured. (Nothing to do on APF27, see this page to know how to do with the APF9328DevFull).
  • Then, Wireless network must be configured selecting these options in make linux-menuconfig:
 [*] Networking support  --->
    Wireless  --->
        <*> Generic IEEE 802.11 Networking Stack (mac80211)
  • Finally, select the chipset :
 Device Drivers  --->
    [*] Network device support  --->
        Wireless LAN  --->
            [*] Wireless LAN (IEEE 802.11)
            <M> Ralink driver support
            <M> Ralink rt2501/rt73 (USB) support

Wi-Fi configuration

First mount the module: 

# modprobe rt73usb

Then copy the firmware named rt73.bin (found in Module directory of rt73-cvs archive) in apf /lib/firmware directory. If /lib/firmware doesn't exist create it. 

 mkdir -p /lib/firmware
 tftp -g -r rt73.bin <yourIP>
 mv rt73.bin /lib/firmware

Your Wi-Fi module driver is ready, you can now connect the dongle and after go further with the Wi-Fi configuration.

ZyDas zd1212 chipset

Configure Linux

 $ make linux26-menuconfig

 [*] Networking support  --->
    Wireless  --->
        <*> Generic IEEE 802.11 Networking Stack (mac80211)

 Device Drivers  --->
     [*] Network device support  --->
         Wireless LAN  --->
             [*] Wireless LAN (IEEE 802.11)
             ...
             <M> ZyDAS ZD1211/ZD1211B USB-wireless support
             [*]   ZyDAS ZD1211 debugging

 $ make linux26 && make

Reinstall your system.

Get firmware

Install firmware on your APF

 # mkdir -p /lib/firmware/
 # cd /lib/firmware/
 # tftp -g -r zd1211-firmware-1.4.tar.bz2 192.168.0.17
 # bunzip2 zd1211-firmware-1.4.tar.bz2
 # tar xf zd1211-firmware-1.4.tar
 # mv zd1211-firmware zd1211

Connect your USB adapter

usb 1-1: new high speed USB device using mxc-ehci and address 2
usb 1-1: configuration #1 chosen from 1 choice
usb 1-1: New USB device found, idVendor=083a, idProduct=4505
usb 1-1: New USB device strings: Mfr=16, Product=32, SerialNumber=0
usb 1-1: Product: USB2.0 WLAN
usb 1-1: Manufacturer: SMC

Launch driver

 # modprobe zd1211rw
 usb 1-1: reset high speed USB device using mxc-ehci and address 2
 zd1211rw 1-1:1.0: phy0
 usbcore: registered new interface driver zd1211rw
 
 # ifconfig wlan0 up
 firmware: requesting zd1211/zd1211b_ub
 firmware: requesting zd1211/zd1211b_uphr

Realtek rtl8187

Compatibility list
Tested devices:

  • Netgear WG111v3

Configure Linux

 $ make linux26-menuconfig

 Device Drivers  --->
     [*] Network device support  --->
         Wireless LAN  --->
             [*] Wireless LAN (IEEE 802.11)
             ...
             <M>   Realtek 8187 and 8187B USB support

 $ make linux26 && make

Launch driver

# modprobe rtl8187
cfg80211: Calling CRDA to update world regulatory domain
ieee80211 phy0: hwaddr 00:22:3f:df:2c:04, RTL8187BvE V0 + rtl8225z2, rfkill mask 2
rtl8187: wireless switch is on
usbcore: registered new interface driver rtl8187

# ifconfig wlan0 up
ADDRCONF(NETDEV_UP): wlan0: link is not ready

To go further

Links

Retrieved from "https://www.armadeus.org/wiki/index.php?title=USB_to_WiFi_adapter&oldid=11158"