Difference between revisions of "APF6"

From ArmadeusWiki
Jump to: navigation, search
(Note for APF6 boards)
(Note for APF6 boards)
Line 25: Line 25:
 
WARNING: Make sure the PCIe #PERST line is connected
 
WARNING: Make sure the PCIe #PERST line is connected
 
</pre>
 
</pre>
Do not take care of if you don't use PCIe commands from uboot.
+
Do not take care of it if you don't use PCIe commands from uboot.
  
 
==Resources==
 
==Resources==

Revision as of 14:50, 28 January 2015

Description

The APF6 is a high-end Single Board Computer targeted for advanced GUI, intensive computation and extended connectivity.

Here is a list of the main features:

  • Processor: i.MX6 (single, dual or quad core Cortex-A9 @ up to 1GHz)
  • RAM: DDR3 1066MHz. 512Mbytes to 2GBytes. 32 ot 64bits data bus. Default capacity will be 512Mbytes.
  • Flash: eMMC 4Gbytes, 8 bits data bus.
  • Ethernet: onboard Physical (ready to use Ethernet 10/100/1000Mbit link)
  • USB: High speed USB OTG (OnTheGo) with onboard Physical (ready to use USB OTG link)
  • USB: High speed Host with integrated PHY
  • PCIexpress Gen2
  • SATA II
  • DVI output
  • TFT CMOS/LVDS interface
  • WiFi (option): b/g/n with u.FL antenna
  • Bluetooth (option): BT 4.0
  • Only one external supply of 3.3V required.
  • Mechanical dimensions: 60x50mm

All the i.MX6 peripherals can be accessed through two high density Hirose connectors.

Note for APF6 boards

For compatibility reasons with the APF6x_SP the PCIe support has been activated on U-Boot. A warning message appears during the boot startup indicating:

WARNING: Make sure the PCIe #PERST line is connected

Do not take care of it if you don't use PCIe commands from uboot.

Resources

Feature list

Video

Video Out

Video In

Wired communication

Wireless communication

Storage

Other

Development boards