Difference between revisions of "TSC2102 Linux driver"
From ArmadeusWiki
(→Usage) |
m (→Usage) |
||
Line 21: | Line 21: | ||
Then: | Then: | ||
− | * get temperature and voltage with | + | * get temperature and voltage with [http://lxr.linux.no/source/Documentation/hwmon/sysfs-interface?v=2.6.18 hwmon] (Hardware Monitoring) interface, |
− | * use touchscreen interface with [[tslib]] | + | * use touchscreen interface with [[tslib]] API, |
− | * play sounds through | + | * play sounds through [http://www.alsa-project.org/ ALSA interface] |
==Quick test== | ==Quick test== |
Revision as of 22:30, 16 September 2007
Installation
$ make linux-menuconfig
Architecture
Touchscreen (tsc2102_ts.ko) | HWmon | ALSA |
---|---|---|
TSC2102 Main driver (tsc2102.ko) | ||
Linux API |
Usage
# insmod /mnt/host/lib/modules/spi_imx.ko # insmod /mnt/host/lib/modules/tsc2102.ko # insmod /mnt/host/lib/modules/evdev.ko # insmod /mnt/host/lib/modules/tsc2102_ts.ko
Then:
- get temperature and voltage with hwmon (Hardware Monitoring) interface,
- use touchscreen interface with tslib API,
- play sounds through ALSA interface
Quick test
To quickly check driver fonctionnality, touch the screen and check that tsc2102 interrupts count is increasing:
# cat /proc/interrupts CPU0 26: 0 MPU IMX-uart 29: 17 MPU IMX-uart 30: 22 MPU IMX-uart 35: 12 MPU imx-mmc 39: 14 MPU I2C_IMX 40: 16 MPU imx-spi.2 41: 0 MPU imx-spi.1 59: 3682 MPU i.MX Timer Tick 60: 0 MPU DMA 61: 0 MPU DMA 110: 0 GPIO eth0 168: 0 GPIO tsc2102 Err: 0 #
Links
- http://source.mvista.com/git/gitweb.cgi?p=linux-omap-2.6.git;a=log;t=7 (search for TSC2102)
- http://osdir.com/ml/linux.ports.arm.omap/2006-08/msg00183.html
- Touchscreen usage on Blackfin
- Compiling TSlib
- http://www.opentom.org/Tslib
- http://www.openembedded.org/filebrowser/org.openembedded.packaged-staging/packages/tslib