Difference between revisions of "Beginner's tutorial step 1"

From ArmadeusWiki
Jump to: navigation, search
Line 11: Line 11:
  
  
* Connect your PC (= "the Host") to your board with a standard null-modem RS232 DB9 cable. If you don't have a RS232 port on your Host, you can use a "USB <-> RS-232" converter (you'll still require the null-modem cable).
+
* On [[APF9328]] & [[APF27]]: connect your PC (= "the Host") to your board with a standard null-modem RS-232 DB9 cable. If you don't have a RS-232 port on your Host, you can use a "USB <-> RS-232" converter (you'll still require the null-modem cable).
 +
* On [[APF51]]: connect your PC (= "the Host") to your board with the delivered miniUSB cable.
  
[[Image:rs232cable_connected.png|center|frame|RS232 Null Modem cable connected on the development board]]
+
[[Image:rs232cable_connected.png|center|frame|RS-232 Null Modem cable connected on the development board]]
 +
[[Image:miniUSB_cable_connected.png|center|frame|miniUSB cable connected on the APF51Dev development board]]
  
 
* Connect your Target to your local network with an Ethernet Cable. If you don't own any network, you can use [[Wikipedia:Ethernet_crossover_cable|an Ethernet crossover cable]] to directly connect your Target and your Host.
 
* Connect your Target to your local network with an Ethernet Cable. If you don't own any network, you can use [[Wikipedia:Ethernet_crossover_cable|an Ethernet crossover cable]] to directly connect your Target and your Host.

Revision as of 10:39, 5 May 2011

  • Plug your APFxx module to your development board (custom or DevLight/DevFull) (your system will be hereafter referred to as "the Target")

File:Apf9328 on devfull.jpg


  • On APF9328 & APF27: connect your PC (= "the Host") to your board with a standard null-modem RS-232 DB9 cable. If you don't have a RS-232 port on your Host, you can use a "USB <-> RS-232" converter (you'll still require the null-modem cable).
  • On APF51: connect your PC (= "the Host") to your board with the delivered miniUSB cable.
File:Rs232cable connected.png
RS-232 Null Modem cable connected on the development board
File:MiniUSB cable connected.png
miniUSB cable connected on the APF51Dev development board
  • Connect your Target to your local network with an Ethernet Cable. If you don't own any network, you can use an Ethernet crossover cable to directly connect your Target and your Host.


Navigation:

<< Previous step    You are in step N°1    Next step >>