Difference between revisions of "APF27 Linux kernel status"
From ArmadeusWiki
m (→Current version) |
(→Current version) |
||
| Line 2: | Line 2: | ||
==Current version== | ==Current version== | ||
| − | Currently (Armadeus-3.4) supported Linux version is: '''2.6.29.6'''.<br> | + | Currently (Armadeus-3.4) supported Linux version is: '''2.6.29.6'''. There is a project to use '''2.6.38.8''' see the page [[How_to_use_kernel_2.6.38.x_on_APF27]] to use it.<br> |
Details concerning the drivers usage can be found [[Setup|here]]. | Details concerning the drivers usage can be found [[Setup|here]]. | ||
Revision as of 09:38, 18 July 2012
The APF27 Linux distribution can be found here: latest stable installation tarball from SourceForge
Current version
Currently (Armadeus-3.4) supported Linux version is: 2.6.29.6. There is a project to use 2.6.38.8 see the page How_to_use_kernel_2.6.38.x_on_APF27 to use it.
Details concerning the drivers usage can be found here.
- NT = Not Tested
- NA = Not Available / Not possible
APF27 module (ie i.MX27 internal controllers + FPGA)
| Driver | Compiling ? Static / Module |
Working ? | Comments | |
|---|---|---|---|---|
| NAND Flash | OK | NA | OK | |
| PCMCIA | NA | NA | NA | can not be used on the APF27 |
| 1Wire | NT | NT | NT | not integrated yet |
| ATA | NA | NA | NA | can not be used on the APF27 |
| SPI | NA | OK | OK | |
| I2C | NA | OK | OK | |
| Keypad | NT | NT | NT | not integrated yet (coming soon...) |
| MMC/SD/SDIO | NA | OK | OK | |
| UART | OK | NA | OK | |
| Ethernet | OK | NA | OK | |
| USB OTG | NA | OK | OK | Used as High Speed Host only (for the moment == on APF27Dev) |
| USB HOST1 | NA | OK | OK | |
| USB HOST2 | NA | NT | NT | |
| PWM | OK | OK | OK | |
| RTC | NT | NT | NT | internal RTC |
| Watchdog | NT | OK | OK | i.MX27 internal Watchdog |
| CSI | NA | NT | NT | |
| LCD | OK | NA | OK | |
| SSI (Audio) | NA | OK | OK | |
| Video codec (H.263/4) | NA | NT | NT | Only encoding was validated. Mostly relies on userspace tools. |
| Security/Sahara/RTIC | NT | NT | NT | |
| FPGA POD interface | NA | OK | OK | Wishbone bus |
| FPGA loading | NA | OK | OK | |
APF27Dev development baseboard
- NT = Not Tested
- NA = Not Available / Not possible
| Driver | Compiling ? Static / Module |
Working ? | Comments | |
|---|---|---|---|---|
| RTC | NA | OK | OK | DS1374 |
| microSD | NA | OK | OK | |
| Ethernet | OK | NA | OK | |
| RS232 | OK | NA | OK | |
| LCD | NA | OK | OK | |
| Audio out | NA | OK | OK | ALSA |
| Audio in | NA | NT | NT | Coming soon... |
| Touchscreen | NA | OK | OK | |
| USB Host High Speed | NA | OK | OK | |
| USB Host Full Speed | NA | OK | OK | |
| ADC | NA | OK | OK | MAX1027 |
| DAC | NA | OK | OK | MAX5821 |
| CAN Bus | NA | NT | NT | MCP2515 |
| HDMI | No drivers needed | OK | AD9889 | |
| GPS | No drivers needed | NT | Coming soon... (Wireless extension board) | |
| GSM | No drivers needed | NT | Coming soon... (Wireless extension board) | |
| WIFI | NA | OK | NT | Coming soon... (Wireless extension board) |
| Bluetooth | NA | NT | NT | Coming soon... (Wireless extension board) |
