APF27 Linux kernel status
From ArmadeusWiki
Revision as of 11:11, 10 February 2009 by Salocin68 (Talk | contribs) (New page: =APF27 Driver status= * NT = Not Tested * NA = Not Available / Not possible {| border="1" cellpadding="5" cellspacing="0" summary="Functionnalities test results" |- style="background:#efe...)
APF27 Driver status
- NT = Not Tested
- NA = Not Available / Not possible
| Driver | Compiling ? (APF27) Static / Module |
Working ? (APF27) | Comments | ||||||
|---|---|---|---|---|---|---|---|---|---|
| ADC | NT | OK | OK | MAX1027 | |||||
| Audio Out | NT | OK | OK | TSC2101 + ALSA | |||||
| Audio In | NT | NT | NT | ||||||
| Backlight | NT | OK | OK | ||||||
| CAN bus | NT | NT | NT | ||||||
| DAC | No driver | OK | setDAC tool | No driver | OK | setDAC tool | |||
| Ethernet | OK | NA | OK | DM9000, tftp -g 700KB/sec |
OK | NA | OK | Internal FEC read -> 785 kBytes/sec write -> 839 kBytes/sec | |
| FPGA config | NT | OK | NT | NT | NT | NT | |||
| FPGA PS/2 | NT | OK | NT | NT | NT | NT | |||
| I2C Host | OK | NT | OK | OK | NT | OK | |||
| LCD | OK | NA | OK | Tux displayed ;-) | OK | NT | OK | Tux displayed ;-) | |
| MMC/SD | OK | NA | OK | Linux boot on MMC Ok | OK | NT | |||
| PWM classic | NT | OK | OK | PWM | NA | NA | NA | ||
| PWM sound | NT | OK | NT | PWM | NA | NA | NA | ||
| RTC | OK | NT | KO | DS1374, use legacy one instead | OK | NT | OK | ||
| RTC legacy | OK | NT | OK | rtc-ds1327-legacy | NT | NT | OK | ||
| Serial | OK | NA | OK | ttySMX0 & 1 | OK | NA | NT | ttySMX0,1,2,3,4,5 | |
| SPI Host | NT | OK | OK | OK | NT | OK | |||
| Touchscreen | NA | OK | OK | TSC2102_Linux_driver | NT | OK | OK | TSC2101 + TSC2102_Linux_driver | |
| USB (gadget) | OK | OK | Mass storage OK Serial KO |
USB_Gadget insmod: cannot insert 'g_serial.ko': invalid parameters |
NA | NA | NA | Not available (Use Host<->Host cable) | |
| USB (Host) | NA | OK | OK | ISP1761 | OK | NT | OK: both controllers | i.MX27 internal controllers | |
| Watchdog | NA | NA | NA | NA | NA | NA | |||
