Beginner's tutorial step 1

• Plug your APFxx module to your development board (custom or DevLight/DevFull) (your system will be hereafter referred to as "the Target")

An APF9328 connected to a DevLight

File:Apf9328 on devfull.png An APF9328 connected to a DevFull

File:Apf27 on dev27.png An APF9328 connected to a Dev27

• Connect your PC (= "the Host") to your board with a null-modem RS232 cable (only Rx/Tx/Gnd signals are needed). If you don't have a RS232 port on your Host, you can use a "USB <-> RS-232" converter (you'll still require the null-modem cable).

File:Rs232cable connected.png

RS232 Null Modem cable connected on the development board

• Connect your Target to your local network with an Ethernet Cable. If you don't any network, you can use an Ethernet crossover cable to directly connect your Target and your Host.

Navigation:
<< Previous step    You are in step N°1    Next step >>