Beginner's tutorial step 1
From ArmadeusWiki
- Plug your APFxx module to your development board (custom or DevLight/DevFull) (your system will be hereafter referred to as "the Target")
- Apf9328 on devfull.jpg
An APF9328 connected to a DevFull
- Connect your PC (= "the Host") to your board with a standard null-modem RS232 DB9 cable. If you don't have a RS232 port on your Host, you can use a "USB <-> RS-232" converter (you'll still require the null-modem cable).
- Connect your Target to your local network with an Ethernet Cable. If you don't own any network, you can use an Ethernet crossover cable to directly connect your Target and your Host.
Navigation: | |
---|---|
<< Previous step You are in step N°1 Next step >> |