Difference between revisions of "Beginner's tutorial step 1"

Revision as of 17:16, 15 May 2009

Plug your APFxx module to your development board (custom or DevLight/DevFull) (your system will be hereafter referred to as "the Target")

Connect your PC (= "the Host") to your board with a null-modem RS232 cable (only Rx/Tx/Gnd signals are needed). If you don't have a RS232 port on your Host, you can use a "USB <-> RS-232" converter (you'll still require the null-modem cable).

RS232 Null Modem cable connected on the development board

Connect your Target to your local network with an Ethernet Cable. If you don't any network, you can use an Ethernet crossover cable to directly connect your Target and your Host.

Navigation:
<< Previous step You are in step N°1 Next step >>

@@ Line 1: / Line 1: @@
 * Plug your APFxx module to your development board (custom or [[APF9328DevLight|DevLight]]/[[APF9328DevFull|DevFull]]) (your system will be hereafter referred to as "the Target")
-{| class="wikitable"
+<gallery>
-|-
+Image:Apf_on_devlight.png|An APF9328 connected to a DevLight
-|
+Image:apf9328_on_devfull.png|An APF9328 connected to a DevFull
-[[Image:Apf_on_devlight.png|frame|An APF9328 connected to a DevLight]]
+Image:apf27_on_dev27.png|An APF9328 connected to a Dev27
-||
+</gallery>
-[[Image:apf9328_on_devfull.png|frame|An APF9328 connected to a DevFull]]
-||
+[[Image:apf9328_on_devfull.png]]
-[[Image:apf27_on_dev27.png|frame|An APF9328 connected to a Dev27]]
+[[Image:apf27_on_dev27.png]]
-|-
-|}
 * Connect your PC (= "the Host") to your board with a [http://en.wikipedia.org/wiki/Null_modem null-modem RS232 cable] (only Rx/Tx/Gnd signals are needed). If you don't have a RS232 port on your Host, you can use a "USB <-> RS-232" converter (you'll still require the null-modem cable).