CAN bus Linux sja1000

From ArmadeusWiki
Revision as of 18:29, 4 May 2011 by KevinJ (Talk | contribs) (New page: {{Under_Construction}} This page explain how to communicate with a CAN bus through the CAN controller SJA1000 and a TJA1040 CAN Transceiver. ==Hardware Requirements== * APF27-Dev and APF...)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Page under construction... Construction.png Informations on this page are not guaranteed !!

This page explain how to communicate with a CAN bus through the CAN controller SJA1000 and a TJA1040 CAN Transceiver.

Hardware Requirements

  • APF27-Dev and APF27 with FPGA Spartan 3A
  • 8 bits transceiver 74LVXC3245 (2x)
  • CAN bus controller SJA1000
  • 24Mhz oscillator MXO45HST24M0000
  • CAN bus transceiver TJA1040
  • Resistors and capacitances

Realisation

Foremost, you have to create the following mounting

Sja1000-APF27Dev-Mounting.png

Retrieved from "http://www.armadeus.org/wiki/index.php?title=CAN_bus_Linux_sja1000&oldid=9617"