Difference between revisions of "CAN bus Linux sja1000"
From ArmadeusWiki
(New page: {{Under_Construction}} This page explain how to communicate with a CAN bus through the CAN controller SJA1000 and a TJA1040 CAN Transceiver. ==Hardware Requirements== * APF27-Dev and APF...) |
(No difference)
|
Revision as of 18:29, 4 May 2011
Page under construction...
Informations on this page are not guaranteed !!
This page explain how to communicate with a CAN bus through the CAN controller SJA1000 and a TJA1040 CAN Transceiver.
Hardware Requirements
- APF27-Dev and APF27 with FPGA Spartan 3A
- 8 bits transceiver 74LVXC3245 (2x)
- CAN bus controller SJA1000
- 24Mhz oscillator MXO45HST24M0000
- CAN bus transceiver TJA1040
- Resistors and capacitances
Realisation
Foremost, you have to create the following mounting
