Difference between revisions of "Driver for i.MX GPIO controlled keypads"
From ArmadeusWiki
(creation) |
(No difference)
|
Revision as of 10:24, 31 May 2008
PAGE UNDER CONSTRUCTION !!!
Introduction
This driver is intented to control matrix keypads connected to i.MX GPIOs
Installation
If not already done in standard Armadeus rootfs:
$ make linux-menuconfig Device Drivers ---> Input device support ---> [*] Keyboards ---> <*> AT keyboard
then
Device Drivers ---> Armadeus specific drivers ---> <M> Armadeus Keypad driver
Reflash rootfs then:
# modprobe imxkeypad Initializing Armadeus keypad driver input: imxkeypad as /class/input/input0
Test
- If you have a graphical LCD connected to your board (= virtual terminal), then you should see what you type.
- If you don't have any virtual terminal, but only the serial console:
# cat /sys/class/input/input0/event0/dev 13:64
If corresponding device node in /dev/input/ is not existing, then:
# mkdir -p /dev/input # mknod /dev/input/event0 c 13 64
# cat /dev/input/event0
Then you should see weirds characters when pressing keyboard keys:
�,~~_�,}�}�3T,QToT6,TT�,�;��, � �