Search results

From ArmadeusWiki
Jump to: navigation, search

Create the page "APF27 DEV" on this wiki! See also the search results found.

  • BootStrap
    ...recover.py (xxxx depends on the version of your board (ie: apf9328, apf27, apf28, apf51, apf6 or opos6ul)) ...which the board is connected. Under Linux please use ''/dev/ttySx'' or ''/dev/ttyUSBx'' and under Window$ use COMx.
    11 KB (1,731 words) - 16:31, 6 May 2020
  • Framebuffer
    ...r [[LQ043_Adapt|Sharp LQ043 LCD]] on [[APF9328]] and for Chimei LW700 on [[APF27]]/[[APF51]]) in standard/default Armadeus kernel image. [[APF28]] has a boo * Framebuffer device can be accessed with ''/dev/fb0''.
    4 KB (604 words) - 13:16, 18 January 2023
  • USB Gadget
    ...ied USB host port ([[APF27Dev]]), or an USB OTG port put in device mode ([[APF27 PPS]], [[APF51Dev]], [[APF28Dev]], [[APF6Dev]], [[OPOS6ULDev]]), and it can === Software specifics for the APF27Dev, APF27 PPS, APF51Dev ===
    7 KB (1,087 words) - 21:23, 31 March 2020
  • Target Software Installation
    Connecting to /dev/ttyUSB0, speed 115200 Connecting to /dev/ttyUSB0, speed 115200
    19 KB (2,783 words) - 09:46, 9 September 2021
  • FPGA registers access from Linux userspace
    * For '''APF9328, APF27 and APF51''' registers access are done with a memory bus (parallel). First of all, you need to get a file descriptor for ''/dev/mem'' using the ''open()'' function
    4 KB (567 words) - 10:59, 27 February 2017
  • PWM
    * Load the driver ([[APF9328]], [[APF27]], [[APF51]]): * For the one who plan to use sound, ''/dev/pwm0'' device file should be automatically created.
    5 KB (883 words) - 13:30, 10 February 2022
  • Watchdog
    {{Note|On [[APF9328]]/[[APF27]]/[[APF28]]/[[APF51]]/[[OPOS6UL]] the watchdog driver is compiled within th .../watchdog'' or ''/dev/watchdog0'' device file (depending on your board, ''/dev/watchdog'' might be the 1 minute software Linux watchdog):
    2 KB (343 words) - 13:52, 26 January 2018
  • RTC
    ===APF9328/APF27=== No permanent RTC is present on the [[APF9328]]/[[APF27]] modules, but you can have one (DS1374, as an option) on the development b
    6 KB (895 words) - 15:47, 19 September 2016
  • Tslib
    ...corresponding touchscreen Linux driver has been loaded before. On APF9328/APF27, please have a look to [[TSC2102_Linux_driver]] if not already done. On [[A export TSLIB_TSDEVICE=/dev/input/event0
    3 KB (422 words) - 11:16, 2 August 2019
  • I2C
    ...cumentation/i2c/dev-interface in kernel source directory Documentation/i2c/dev-interface]. I will read from device file /dev/i2c-1, chip address 0x3c, data address
    8 KB (1,322 words) - 08:55, 26 July 2018
  • GPS
    * the GPS receiver of the [[Wireless_extension_board|APF27 Wireless extension]] & [[APF51Dev]] boards (uBlox) # export GPS_PORT=/dev/ttymxc0
    6 KB (924 words) - 14:50, 29 March 2017
  • QEMU
    ! APF27 !! APF6 ! APF27 !! APF6
    8 KB (1,266 words) - 13:14, 13 January 2023
  • A simple design with Wishbone bus
    LED driver is seen in Linux like a character driver. Writing in a ''/dev'' file will enable or disable the LED. ...example/wishbone_example51/binaries/top_wishbone_example51_lx9.bin'''. For apf27 and apf9328 bitstream can be found in '''firmware/wishbone_example/wishbone
    10 KB (1,574 words) - 12:43, 30 June 2022
  • CAN bus Linux driver
    # modprobe can-dev ! APF27 & APF51 || APF6
    5 KB (783 words) - 11:10, 31 July 2018
  • USB to WiFi adapter
    | '''APF9328''' || '''APF27''' || '''APF51''' || '''APF28''' # iw dev wlan0 scan
    13 KB (1,670 words) - 19:05, 26 February 2018
  • WiFi
    ...d to [[Wireless Tools| install wireless tools]] first (done by default for APF27 / PPS / APF51 / APF6 / OPOS6UL) and of course also need to have a running W | <pre class=apf># iw dev
    7 KB (911 words) - 15:24, 30 January 2024
  • Serial ports usage on Linux
    ..., [[APF51]] & [[OPOS6UL]]: ''/dev/ttySMXN'' (with kernels <= 2.6.29) or ''/dev/ttymxcN'' (with kernels > 2.6.29) ** on [[APF28]]: ''/dev/ttySP[0-4]'' (general purpose serial ports) or ''/dev/ttyAMxx'' (debug serial ports)
    4 KB (587 words) - 09:58, 26 July 2018
  • JTAG
    ...tional) wired to apf27 R76 on cpu side: http://www.armadeus.com/_downloads/apf27/hardware/apf27_V1.2_top_assembly.pdf If the APF27 board is equipped with FPGA, the FPGA chip MUST be powered before using JTA
    26 KB (3,781 words) - 18:23, 3 June 2016
  • Bluetooth
    !'''Model''' || colspan="2" | '''Status<br> APF9328 / APF27''' ||'''Chipset''' || '''Comments''' * (Done by default on [[APF27]], [[APF51]], [[APF6]] and [[OPOS6UL]])
    19 KB (2,734 words) - 10:34, 7 December 2020
  • GSM/GPRS
    ...extension board (APW)]] is connected to the UART2 (/dev/ttySMX1) of the [[APF27]]. ====APF27====
    15 KB (2,358 words) - 15:23, 17 August 2023
  • UBIFS
    {{Note|UBIFS is now the rootfs filesystem used on [[APF27]], [[APF28]] & [[APF51]] boards, so this page should only be considered as * add ''uuid-dev'' packages (should be already installed as required to build the HEAD of Ar
    4 KB (621 words) - 11:43, 10 January 2019
  • AsDevices
    To open the bus, you have to know its number. On [[APF9328]] and [[APF27]] only two busses are present: number 0 and number 1. The ''open()'' functi Once the device file ''/dev/spidevx.x'' is available from the kernel, as_spi library can be used by inc
    14 KB (2,115 words) - 18:35, 1 August 2018
  • SPI
    ...'''Cl'''oc'''k''' signal used to synchronise the transmission. (In imx27 (apf27) maximum frequency of SCLK is 22.167MHz in master mode and 16.625 in slave On [[APF27]], the i.MX27 contains 3 SPI devices that can be configured in master (slav
    4 KB (648 words) - 16:40, 31 January 2018
  • Accessing U-Boot environment variables from Linux
    * For the [[APF27]] with U-Boot 1.3.4: /dev/mtd1 0x0000 0x20000 0x20000...
    5 KB (721 words) - 10:52, 14 September 2018
  • GPS daemon
    * On [[APF27]] + Wireless extension, at first startup you may need to add the following stty -F /dev/ttySMX4 raw -echo -echoe -echok 38400 <<<<<<<<<<<<-----------
    5 KB (513 words) - 20:39, 22 January 2020
  • GPIO keys
    Your APF51|APF27|APF28 development board feature a user switch connected to a GPIO pin. The * APF27: GPIO_PORTF | 13
    4 KB (601 words) - 16:52, 21 June 2017
  • X11 server
    # /usr/bin/X -mouse evdev -retro -keybd evdev,,device=/dev/input/event0 & # /usr/bin/X -retro -mouse tslib,,device=/dev/input/event0 &
    3 KB (335 words) - 11:40, 20 January 2023
  • Debian on APF
    This page details how to install Debian on an [[APF27]] / [[APF28]] / [[APF51]] / [[APF6]] / [[OPOS6UL]]. ...l port (replace ''ttyXXX'' with ''ttymxc2'' on [[APF51]], ''ttySMX0'' on [[APF27]], ''ttymxc3'' on [[APF6]], ''ttymxc0'' on [[OPOS6UL]]), otherwise no login
    17 KB (2,771 words) - 18:23, 8 October 2019
  • GPIO LEDS
    ...gpio-leds'' driver to manage states of the LEDs connected to your Armadeus Dev board. * APF27: GPIO_PORTF | 14
    4 KB (660 words) - 18:16, 7 September 2017
  • Kernel-upstream-status
    {| border="1" cellpadding="5" cellspacing="0" summary="APF27" | style="text-align:center;" | '''[[APF27]]'''
    8 KB (785 words) - 14:54, 2 June 2016
Retrieved from "http://www.armadeus.org/wiki/index.php?title=Special:Search"