Difference between revisions of "Tianma TM035"
From ArmadeusWiki
SebastienSz (Talk | contribs) (→Description: "no more sold by Armadeus Systems" --> Not true !) |
SebastienSz (Talk | contribs) (How to enable Tianma TM035) |
||
| Line 4: | Line 4: | ||
Module flat cable can be used to connect the TM035 to the [[APF28Dev]]. LCD resolution: 320x240. | Module flat cable can be used to connect the TM035 to the [[APF28Dev]]. LCD resolution: 320x240. | ||
| + | |||
| + | ==How to enable Tianma TM035 support on recent kernel (3.19+)== | ||
| + | |||
| + | You have to edit the APF28Dev's device tree file. The file is ''buildroot/output/build/linux-XXX/arch/arm/boot/dts/imx28-apf28dev.dts'' . | ||
| + | |||
| + | * Find the following lines and modify them as the comment says: | ||
| + | |||
| + | <pre class="host> | ||
| + | ... | ||
| + | |||
| + | lcdif@80030000 { | ||
| + | pinctrl-names = "default"; | ||
| + | pinctrl-0 = <&lcdif_16bit_pins_a | ||
| + | &lcdif_pins_apf28dev>; | ||
| + | //display = <&st0700>; | ||
| + | /* | ||
| + | * To use the Tianma TM035 LCD comment the line above | ||
| + | * and uncomment the line below. | ||
| + | */ | ||
| + | display = <&tm035>; | ||
| + | status = "okay"; | ||
| + | |||
| + | ... | ||
| + | </pre> | ||
| + | |||
| + | * Rebuild the device tree and update the it on your board. | ||
==Features== | ==Features== | ||
Revision as of 16:59, 13 July 2015
Contents
Description
This Tianma's LCD module allowed you to add a display and a touchscreen to your APF28Dev.
Module flat cable can be used to connect the TM035 to the APF28Dev. LCD resolution: 320x240.
How to enable Tianma TM035 support on recent kernel (3.19+)
You have to edit the APF28Dev's device tree file. The file is buildroot/output/build/linux-XXX/arch/arm/boot/dts/imx28-apf28dev.dts .
- Find the following lines and modify them as the comment says:
...
lcdif@80030000 {
pinctrl-names = "default";
pinctrl-0 = <&lcdif_16bit_pins_a
&lcdif_pins_apf28dev>;
//display = <&st0700>;
/*
* To use the Tianma TM035 LCD comment the line above
* and uncomment the line below.
*/
display = <&tm035>;
status = "okay";
...
- Rebuild the device tree and update the it on your board.
