Difference between revisions of "Tianma TM035"
From ArmadeusWiki
SebastienSz (Talk | contribs) m |
SebastienSz (Talk | contribs) m |
||
| Line 29: | Line 29: | ||
</pre> | </pre> | ||
| − | * Rebuild the device tree and update it on your board. | + | * Rebuild the device tree |
| + | <pre class="host"> | ||
| + | $ make linux-rebuild | ||
| + | </pre> | ||
| + | |||
| + | * Copy the new dtb file (located in ''buildroot/output/images'') in your [[tftpboot]] directory and update it on your board. In U-Boot: | ||
| + | |||
| + | <pre class="apf"> | ||
| + | BIOS> run update_dtb | ||
| + | </pre> | ||
==Features== | ==Features== | ||
Revision as of 17:25, 13 July 2015
Contents
Description
This Tianma's LCD module allowed you to add a display and a touchscreen to your APF28Dev.
Module flat cable can be used to connect the TM035 to the APF28Dev. LCD resolution: 320x240.
How to enable Tianma TM035 support on recent kernel (3.19+)
You have to edit the APF28Dev's device tree file. The file is buildroot/output/build/linux-XXX/arch/arm/boot/dts/imx28-apf28dev.dts .
- Find the following lines and modify them as the comment says:
...
lcdif@80030000 {
pinctrl-names = "default";
pinctrl-0 = <&lcdif_16bit_pins_a
&lcdif_pins_apf28dev>;
//display = <&st0700>;
/*
* To use the Tianma TM035 LCD comment the line above
* and uncomment the line below.
*/
display = <&tm035>;
status = "okay";
...
- Rebuild the device tree
$ make linux-rebuild
- Copy the new dtb file (located in buildroot/output/images) in your tftpboot directory and update it on your board. In U-Boot:
BIOS> run update_dtb
