Difference between revisions of "USB to Playstation joypad adapter"
From ArmadeusWiki
m |
m (→Installation) |
||
| Line 22: | Line 22: | ||
</pre> | </pre> | ||
<pre class="config"> | <pre class="config"> | ||
| − | Device Drivers ---> | + | Device Drivers ---> |
| − | + | Input device support ---> | |
| − | + | <*> Joystick interface | |
| + | * HID Devices ---> | ||
| + | Special HID drivers ---> | ||
| + | <*> Pantherlord devices support | ||
| + | * Pantherlord force feedback support | ||
</pre> | </pre> | ||
<pre class="host"> | <pre class="host"> | ||
Revision as of 16:01, 9 July 2010
How-to use USB to Playstation[1] joypad adapters on your APF boards.
Page under construction...
Informations on this page are not guaranteed !!
This type of adapter allows you to control your applications/games with massively available joypads, through the USB Host interface (only available on DevFull & APF27)
Tested materials
| Adapter Model | Chip | Status APF9328 / APF27 |
Driver | Comments | |
|---|---|---|---|---|---|
| APM TwinUSB adapter | ??? | Digital pads & vibrators not tested | |||
| TBDL | |||||
Installation
$ make linux26-menuconfig
Device Drivers --->
Input device support --->
<*> Joystick interface
* HID Devices --->
Special HID drivers --->
<*> Pantherlord devices support
* Pantherlord force feedback support
$ make linux26 && make
copy following drivers on your target or reflash your rootfs (for more infos, see this page)
drivers/usb/...
Usage
- be sure that your USB Host is running on your board: explanations are here
- plug your USB adapter (here a Prolific one)
TBDL
- Load the module:
# modprobe xxxx
- a new joystick interface will be created and recognized by applications supporting it.
Software examples
- If you want to know how to drive such beast from your applications, take a look at:
- target/demos/input_test/ (SDL example)
Links
- TBDL
Notes:
- ↑ Playstation and the Playstation logos are registered trademarks of Sony Computer Entertainment Inc.
