Use FTDI USB to TTL Serial cable for PC and APF direct connection

From ArmadeusWiki
Jump to: navigation, search

Page under construction... Construction.png Informations on this page are not guaranteed !!

It is possible to avoid the use of a standard RS232 Null Modem cable to communicate between your Host and your APF, by using "FTDI cables" (which integrate a USB<->RS232 converter).

Tested cables

FTDI 6 pins connector APF9328DevFull UART
connector (X27)
1/Black GND -> 6 GND
2/Brown CTS# -> NC NC
2/Red VCC -> NC NC
3/Orange TX -> 3 RX
5/Yellow RX -> 1 TX
6/Green CTS# -> NC NC