Difference between revisions of "Use FTDI USB to TTL Serial cable for PC and APF direct connection"
From ArmadeusWiki
m |
m |
||
(One intermediate revision by the same user not shown) | |||
Line 1: | Line 1: | ||
{{Under_Construction}} | {{Under_Construction}} | ||
− | It is possible to avoid the use of a standard RS232 Null Modem cable to communicate between your Host and | + | It is possible to avoid the use of a standard RS232 Null Modem cable to communicate between your Host and your APF, by using "FTDI cables" (which integrate a USB<->RS232 converter). |
==Tested cables== | ==Tested cables== | ||
− | * TTL-232R-3V3 with APF9328 (3,3V level on UARTs) | + | * [http://www.ftdichip.com/Products/EvaluationKits/TTL-232R-3V3.htm TTL-232R-3V3] with APF9328 (3,3V level on UARTs) |
{| border="1" cellpadding="5" cellspacing="0" summary="put summary here" | {| border="1" cellpadding="5" cellspacing="0" summary="put summary here" | ||
|- style="background:#efefef;" align="center" | |- style="background:#efefef;" align="center" | ||
Line 23: | Line 23: | ||
==Links== | ==Links== | ||
− | |||
* http://www.ftdichip.com/Products/EvaluationKits/TTL-232R-3V3.htm | * http://www.ftdichip.com/Products/EvaluationKits/TTL-232R-3V3.htm | ||
+ | * [[Serial_ports_usage_on_Linux]] | ||
+ | |||
+ | [[Category:Serial ports]] |
Latest revision as of 15:16, 4 May 2010
Page under construction... Informations on this page are not guaranteed !!
It is possible to avoid the use of a standard RS232 Null Modem cable to communicate between your Host and your APF, by using "FTDI cables" (which integrate a USB<->RS232 converter).
Tested cables
- TTL-232R-3V3 with APF9328 (3,3V level on UARTs)
FTDI 6 pins connector | APF9328DevFull UART connector (X27) | |||
---|---|---|---|---|
1/Black | GND | -> | 6 | GND |
2/Brown | CTS# | -> | NC | NC |
2/Red | VCC | -> | NC | NC |
3/Orange | TX | -> | 3 | RX |
5/Yellow | RX | -> | 1 | TX |
6/Green | CTS# | -> | NC | NC |