Difference between revisions of "Use FTDI USB to TTL Serial cable for PC and APF direct connection"
From ArmadeusWiki
m |
m |
||
| Line 1: | Line 1: | ||
{{Under_Construction}} | {{Under_Construction}} | ||
| − | It is possible to avoid the use of a standard RS232 Null Modem cable to communicate between your Host and | + | It is possible to avoid the use of a standard RS232 Null Modem cable to communicate between your Host and your APF, by using "FTDI cables" (which integrate a USB<->RS232 converter). |
==Tested cables== | ==Tested cables== | ||
| Line 25: | Line 25: | ||
* http://www.ftdichip.com/Products/EvaluationKits/TTL-232R-3V3.htm | * http://www.ftdichip.com/Products/EvaluationKits/TTL-232R-3V3.htm | ||
* [[Serial_ports_usage_on_Linux]] | * [[Serial_ports_usage_on_Linux]] | ||
| + | |||
| + | [[Category:Serial ports]] | ||
Latest revision as of 15:16, 4 May 2010
Page under construction...
Informations on this page are not guaranteed !!
It is possible to avoid the use of a standard RS232 Null Modem cable to communicate between your Host and your APF, by using "FTDI cables" (which integrate a USB<->RS232 converter).
Tested cables
- TTL-232R-3V3 with APF9328 (3,3V level on UARTs)
| FTDI 6 pins connector | APF9328DevFull UART connector (X27) | |||
|---|---|---|---|---|
| 1/Black | GND | -> | 6 | GND |
| 2/Brown | CTS# | -> | NC | NC |
| 2/Red | VCC | -> | NC | NC |
| 3/Orange | TX | -> | 3 | RX |
| 5/Yellow | RX | -> | 1 | TX |
| 6/Green | CTS# | -> | NC | NC |
