Use FTDI USB to TTL Serial cable for PC and APF direct connection
From ArmadeusWiki
Revision as of 17:25, 13 July 2009 by JulienB (Talk | contribs) (New page: It is possible to avoid the use of a standard RS232 Null Modem cable to communicate between your Host and you APF, by using FTDI cables. ==Tested cables== * TTL-232R-3V3 with APF9328 (3,3...)
It is possible to avoid the use of a standard RS232 Null Modem cable to communicate between your Host and you APF, by using FTDI cables.
Tested cables
- TTL-232R-3V3 with APF9328 (3,3V level on UARTs)
| FTDI 6 pins connector | APF9328DevFull UART connector (X27) | |||
|---|---|---|---|---|
| 1/Black | GND | -> | 6 | GND |
| 2/Brown | CTS# | -> | NC | NC |
| 2/Red | VCC | -> | NC | NC |
| 3/Orange | TX | -> | 3 | RX |
| 5/Yellow | RX | -> | 1 | TX |
| 6/Green | CTS# | -> | NC | NC |
