Difference between revisions of "Minicom"
From ArmadeusWiki
(New page: Minicom is a serial line terminal emulator that allows you to take control of your board through the RS232 line. With it you can have access to the U-Boot/Linux console of your APF without...) |
(→Usage) |
||
Line 26: | Line 26: | ||
Switch in command mode | Switch in command mode | ||
q | q | ||
+ | |||
+ | == Send file == | ||
+ | |||
+ | * Open minicom menu | ||
+ | C-A + s | ||
+ | * Choose zmodem | ||
+ | * Select your file to download with space-key | ||
+ | * launch transfert with enter | ||
== Usefull tips == | == Usefull tips == |
Revision as of 11:05, 14 May 2013
Minicom is a serial line terminal emulator that allows you to take control of your board through the RS232 line. With it you can have access to the U-Boot/Linux console of your APF without needing to connect a keyboard/screen to the board. (For more informations on remote console)
Contents
Installation
On *Ubuntu / Debian
$ sudo apt-get install minicom
or use your system's graphical package manager.
On Fedora
# rpm -q ???
Configuration
$ minicom -s
- Choose serial port name, parameters (8N1) and no hardware handshake
- Save config as default
Usage
- To launch it (-o to not send modem AT init sequence):
$ minicom -o
- To switch from terminal mode to command mode:
CTRL + a then z
- To quit:
Switch in command mode q
Send file
- Open minicom menu
C-A + s
- Choose zmodem
- Select your file to download with space-key
- launch transfert with enter
Usefull tips
- TBDL