Difference between revisions of "Beginner's tutorial step 1"

From ArmadeusWiki
Jump to: navigation, search
m
 
Line 15: Line 15:
  
 
* On [[APF9328]] & [[APF27]]: connect your PC (= "the Host") to your board with a standard null-modem RS-232 DB9 cable. If you don't have a RS-232 port on your Host, you can use a "USB <-> RS-232" converter (you'll still require the null-modem cable).
 
* On [[APF9328]] & [[APF27]]: connect your PC (= "the Host") to your board with a standard null-modem RS-232 DB9 cable. If you don't have a RS-232 port on your Host, you can use a "USB <-> RS-232" converter (you'll still require the null-modem cable).
* On [[APF6]] & [[APF6SP]] & [[APF51]] & [[APF28]]: connect your PC (= "the Host") to your board with the delivered miniUSB cable.
+
* On [[OPOS6UL]] & [[APF6]] & [[APF6SP]] & [[APF51]] & [[APF28]]: connect your PC (= "the Host") to your board with the delivered miniUSB cable.
  
 
<gallery>
 
<gallery>

Latest revision as of 16:59, 3 August 2018

  • Plug your APFxx module to your development board (custom or DevLight/DevFull) (your system will be hereafter referred to as "the Target")

File:Apf9328 on devfull.jpg


  • On APF9328 & APF27: connect your PC (= "the Host") to your board with a standard null-modem RS-232 DB9 cable. If you don't have a RS-232 port on your Host, you can use a "USB <-> RS-232" converter (you'll still require the null-modem cable).
  • On OPOS6UL & APF6 & APF6SP & APF51 & APF28: connect your PC (= "the Host") to your board with the delivered miniUSB cable.

File:Rs232cable connected.png

  • Connect your Target to your local network with an Ethernet Cable. If you don't own any network, you can use an Ethernet crossover cable to directly connect your Target and your Host.


Navigation:

<< Previous step    You are in step N°1    Next step >>