Difference between revisions of "USB Gadget"
(→Introduction) |
(→Installation) |
||
(One intermediate revision by the same user not shown) | |||
Line 31: | Line 31: | ||
* The drivers are now installed by default (since armadeus-3.0) | * The drivers are now installed by default (since armadeus-3.0) | ||
* you should have following modules in your kernel source tree: | * you should have following modules in your kernel source tree: | ||
− | '''/lib/modules/`uname -r`/kernel/drivers/usb/gadget/gadgetfs.ko''' For test | + | '''/lib/modules/`uname -r`/kernel/drivers/usb/gadget/[legacy/]gadgetfs.ko''' For test |
− | '''/lib/modules/`uname -r`/kernel/drivers/usb/gadget/g_ether.ko''' Ethernet emulation on USB | + | '''/lib/modules/`uname -r`/kernel/drivers/usb/gadget/[legacy/]g_ether.ko''' Ethernet emulation on USB |
− | '''/lib/modules/`uname -r`/kernel/drivers/usb/gadget/g_file_storage.ko''' Mass storage | + | '''/lib/modules/`uname -r`/kernel/drivers/usb/gadget/[legacy/]g_file_storage.ko''' Mass storage |
− | '''/lib/modules/`uname -r`/kernel/drivers/usb/gadget/g_serial.ko''' Serial emulation on USB | + | '''/lib/modules/`uname -r`/kernel/drivers/usb/gadget/[legacy/]g_serial.ko''' Serial emulation on USB |
− | '''/lib/modules/`uname -r`/kernel/drivers/usb/gadget/g_zero.ko''' For test | + | '''/lib/modules/`uname -r`/kernel/drivers/usb/gadget/[legacy/]g_zero.ko''' For test |
* If not here is how to add the missing one: [[Talk:USB_Gadget]] | * If not here is how to add the missing one: [[Talk:USB_Gadget]] | ||
==Usage== | ==Usage== | ||
− | ===To emulate a mass storage device | + | ===To emulate a mass storage device=== |
* [[USB_Gadget#Links |create]] or get a "backing storage file" ([ftp://ftp2.armadeus.com/armadeusw/download/backing_file.gz for example]) | * [[USB_Gadget#Links |create]] or get a "backing storage file" ([ftp://ftp2.armadeus.com/armadeusw/download/backing_file.gz for example]) | ||
* copy this file (uncompressed) in the '''/tmp''' directory of your board (here my Host PC has 192.168.0.20 as IP @): | * copy this file (uncompressed) in the '''/tmp''' directory of your board (here my Host PC has 192.168.0.20 as IP @): |
Latest revision as of 20:23, 31 March 2020
Instructions on how to use the USB device (or OTG) port of your Armadeus board to communicate with your PC; ie see your board from your PC like an USB device.
Contents
Introduction
You can connect your APF board to your PC using its USB Device port (APF9328DevFull), a modified USB host port (APF27Dev), or an USB OTG port put in device mode (APF27 PPS, APF51Dev, APF28Dev, APF6Dev, OPOS6ULDev), and it can be "enumerated" as most common USB devices (depending on the type of communication you want to use):
- serial device,
- net device,
- mass storage device.
Hardware specifics for the APF27Dev
At first, an USB A male / A male cable has to be used like this one: http://fr.farnell.com/pro-signal/psg90024/lead-usb-2-0-am-am-2m-black/dp/1494745
Do not use USB cable with integrated ferrite bead !!
The APF27dev board is equipped with two USB host ports. Only the High Speed Host port (top connector) can be configured as an USB Device.
Warning: DO NOT CONNECT TWO HOST PORTS TOGETHER AND TAKE CARE TO USE THE RIGHT USB PORT ON THE APF27DEV !! |
Software specifics for the APF27Dev, APF27 PPS, APF51Dev
In order to activate the device mode, a new parameter has to be added to the U-Boot console variable:
BIOS> setenv extrabootargs otg_mode=device BIOS> saveenv BIOS> boot
Your port will now work as an USB device. "device" keyword might need to be replaced by "peripheral" on recent kernels.
Installation
- The drivers are now installed by default (since armadeus-3.0)
- you should have following modules in your kernel source tree:
/lib/modules/`uname -r`/kernel/drivers/usb/gadget/[legacy/]gadgetfs.ko For test /lib/modules/`uname -r`/kernel/drivers/usb/gadget/[legacy/]g_ether.ko Ethernet emulation on USB /lib/modules/`uname -r`/kernel/drivers/usb/gadget/[legacy/]g_file_storage.ko Mass storage /lib/modules/`uname -r`/kernel/drivers/usb/gadget/[legacy/]g_serial.ko Serial emulation on USB /lib/modules/`uname -r`/kernel/drivers/usb/gadget/[legacy/]g_zero.ko For test
- If not here is how to add the missing one: Talk:USB_Gadget
Usage
To emulate a mass storage device
- create or get a "backing storage file" (for example)
- copy this file (uncompressed) in the /tmp directory of your board (here my Host PC has 192.168.0.20 as IP @):
# tftp -g -r backing_file.gz -l /tmp/backing_file.gz 192.168.0.20 # gunzip /tmp/backing_file.gz
- load g_file_storage or g_mass_storage module (depending on your Linux version):
# modprobe g_file_storage file=/tmp/backing_file g_file_storage gadget: File-backed Storage Gadget, version: 28 November 2005 g_file_storage gadget: Number of LUNs=1 g_file_storage gadget-lun0: ro=0, file: /tmp/backing_file
- connect target's USB cable to your PC and,
On your Linux Host:
- If you have a recent Linux distribution, your device should be automatically mounted. Otherwise:
- as root, launch dmesg and find the /dev/sdaX device assigned to your board:
... usb 1-1.4: new full speed USB device using uhci_hcd and address 7 ... usb 1-1.4: configuration #1 chosen from 1 choice ... scsi1 : SCSI emulation for USB Mass Storage devices ... Vendor: Linux Model: File-Stor Gadget Rev: 0314 ... Type: Direct-Access ANSI SCSI revision: 02 ... SCSI device sda: 8192 512-byte hdwr sectors (4 MB) ... sda: Write Protect is off ... SCSI device sda: 8192 512-byte hdwr sectors (4 MB) ... sda: Write Protect is off ... sda: sda1 ... sd 1:0:0:0: Attached scsi disk sda ... sd 1:0:0:0: Attached scsi generic sg0 type 0
-
- then mount the device and enjoy file sharing:
$ sudo mount /dev/sda1 /mnt/tmp $ cd /mnt/tmp $ showimage /mnt/tmp/test.jpg
To emulate a serial link
- On your Host PC (if usbserial module is not already loaded):
$ sudo modprobe usbserial vendor=0x0525 product=0xA4A6
or you can automate it by modifying /etc/modprobe.d/options file (Tested on *Ubuntu):
$ sudo vim /etc/modprobe.d/options ... options usbserial vendor=0x0525 product=0xA4A6
- on your APF:
# modprobe g_serial g_serial gadget: Gadget Serial v2.4 g_serial gadget: g_serial ready fsl-usb2-udc: bind to driver g_serial g_serial gadget: high speed config #2: CDC ACM config # mknod /dev/ttyGS0 c 249 0 (if not created)
- then connect the USB cable between your PC and your APF and you should see on your Host:
$ tail -f /var/log/messages Sep 27 10:06:38 ... usb 2-1.3: new high speed USB device using ehci_hcd and address 14 Sep 27 10:06:38 ... usb 2-1.3: configuration #2 chosen from 1 choice Sep 27 10:06:38 ... cdc_acm 2-1.3:2.0: ttyACM0: USB ACM device Sep 27 10:06:38 ... usbcore: registered new interface driver cdc_acm Sep 27 10:06:38 ... cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
- you should now be able to send/receive data through /dev/ttyACM0 (PC) and /dev/ttyGS0 (APF):
# cat /dev/ttyGS0
[armadeus]$ echo "COUCOU" > /dev/ttyACM0
COUCOU
To emulate an Ethernet link
- On your Target:
# modprobe g_ether ether gadget: using random self ethernet address ether gadget: using random host ethernet address usb0: Ethernet Gadget, version: May Day 2005 usb0: using imx_udc, OUT ep2out-bulk IN ep1in-bulk STATUS ep4in-int usb0: MAC be:df:31:95:16:e0 usb0: HOST MAC 3e:86:1e:94:eb:84 usb0: RNDIS ready
- Then, an IP address has to be assigned to the freshly created usb0 network interface:
# ifconfig usb0 192.168.10.1
- On your Host:
- On Linux systems: it should be auto-detected and a usb0 interface created, otherwise:
$ sudo modprobe cdc_ether
- On Windows systems:
When the target is detected, you will be asked to give the right driver.
You will find it here: APF27 PPS Windrivers.
- On Windows systems:
- Then, set an IP address for Host usb0 interface in the same network as the one you set for Target. It should then work as a standard IP network. You can also install a DHCP server on your Target.