Search results

Create the page "APF27 DEV" on this wiki! See also the search results found.

• BootStrap
  ...recover.py (xxxx depends on the version of your board (ie: apf9328, apf27, apf28, apf51, apf6 or opos6ul)) ...which the board is connected. Under Linux please use ''/dev/ttySx'' or ''/dev/ttyUSBx'' and under Window$ use COMx.
  11 KB (1,731 words) - 16:31, 6 May 2020
• Framebuffer
  ...r [[LQ043_Adapt|Sharp LQ043 LCD]] on [[APF9328]] and for Chimei LW700 on [[APF27]]/[[APF51]]) in standard/default Armadeus kernel image. [[APF28]] has a boo * Framebuffer device can be accessed with ''/dev/fb0''.
  4 KB (604 words) - 13:16, 18 January 2023
• USB Gadget
  ...ied USB host port ([[APF27Dev]]), or an USB OTG port put in device mode ([[APF27 PPS]], [[APF51Dev]], [[APF28Dev]], [[APF6Dev]], [[OPOS6ULDev]]), and it can === Software specifics for the APF27Dev, APF27 PPS, APF51Dev ===
  7 KB (1,087 words) - 21:23, 31 March 2020
• Target Software Installation
  Connecting to /dev/ttyUSB0, speed 115200 Connecting to /dev/ttyUSB0, speed 115200
  19 KB (2,783 words) - 09:46, 9 September 2021
• FPGA registers access from Linux userspace
  * For '''APF9328, APF27 and APF51''' registers access are done with a memory bus (parallel). First of all, you need to get a file descriptor for ''/dev/mem'' using the ''open()'' function
  4 KB (567 words) - 10:59, 27 February 2017
• PWM
  * Load the driver ([[APF9328]], [[APF27]], [[APF51]]): * For the one who plan to use sound, ''/dev/pwm0'' device file should be automatically created.
  5 KB (883 words) - 13:30, 10 February 2022
• Watchdog
  {{Note|On [[APF9328]]/[[APF27]]/[[APF28]]/[[APF51]]/[[OPOS6UL]] the watchdog driver is compiled within th .../watchdog'' or ''/dev/watchdog0'' device file (depending on your board, ''/dev/watchdog'' might be the 1 minute software Linux watchdog):
  2 KB (343 words) - 13:52, 26 January 2018
• RTC
  ===APF9328/APF27=== No permanent RTC is present on the [[APF9328]]/[[APF27]] modules, but you can have one (DS1374, as an option) on the development b
  6 KB (895 words) - 15:47, 19 September 2016
• Tslib
  ...corresponding touchscreen Linux driver has been loaded before. On APF9328/APF27, please have a look to [[TSC2102_Linux_driver]] if not already done. On [[A export TSLIB_TSDEVICE=/dev/input/event0
  3 KB (422 words) - 11:16, 2 August 2019
• I2C
  ...cumentation/i2c/dev-interface in kernel source directory Documentation/i2c/dev-interface]. I will read from device file /dev/i2c-1, chip address 0x3c, data address
  8 KB (1,322 words) - 08:55, 26 July 2018
• GPS
  * the GPS receiver of the [[Wireless_extension_board|APF27 Wireless extension]] & [[APF51Dev]] boards (uBlox) # export GPS_PORT=/dev/ttymxc0
  6 KB (924 words) - 14:50, 29 March 2017
• QEMU
  ! APF27 !! APF6 ! APF27 !! APF6
  8 KB (1,266 words) - 13:14, 13 January 2023
• A simple design with Wishbone bus
  LED driver is seen in Linux like a character driver. Writing in a ''/dev'' file will enable or disable the LED. ...example/wishbone_example51/binaries/top_wishbone_example51_lx9.bin'''. For apf27 and apf9328 bitstream can be found in '''firmware/wishbone_example/wishbone
  10 KB (1,574 words) - 12:43, 30 June 2022
• CAN bus Linux driver
  # modprobe can-dev ! APF27 & APF51 || APF6
  5 KB (783 words) - 11:10, 31 July 2018
• USB to WiFi adapter
  | '''APF9328''' || '''APF27''' || '''APF51''' || '''APF28''' # iw dev wlan0 scan
  13 KB (1,670 words) - 19:05, 26 February 2018
• WiFi
  ...d to [[Wireless Tools| install wireless tools]] first (done by default for APF27 / PPS / APF51 / APF6 / OPOS6UL) and of course also need to have a running W | <pre class=apf># iw dev
  7 KB (911 words) - 15:24, 30 January 2024
• Serial ports usage on Linux
  ..., [[APF51]] & [[OPOS6UL]]: ''/dev/ttySMXN'' (with kernels <= 2.6.29) or ''/dev/ttymxcN'' (with kernels > 2.6.29) ** on [[APF28]]: ''/dev/ttySP[0-4]'' (general purpose serial ports) or ''/dev/ttyAMxx'' (debug serial ports)
  4 KB (587 words) - 09:58, 26 July 2018
• JTAG
  ...tional) wired to apf27 R76 on cpu side: http://www.armadeus.com/_downloads/apf27/hardware/apf27_V1.2_top_assembly.pdf If the APF27 board is equipped with FPGA, the FPGA chip MUST be powered before using JTA
  26 KB (3,781 words) - 18:23, 3 June 2016
• Bluetooth
  !'''Model''' || colspan="2" | '''Status<br> APF9328 / APF27''' ||'''Chipset''' || '''Comments''' * (Done by default on [[APF27]], [[APF51]], [[APF6]] and [[OPOS6UL]])
  19 KB (2,734 words) - 10:34, 7 December 2020
• GSM/GPRS
  ...extension board (APW)]] is connected to the UART2 (/dev/ttySMX1) of the [[APF27]]. ====APF27====
  15 KB (2,358 words) - 15:23, 17 August 2023

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)