Using FPGA

First recommended readings

• FPGA on APF introduction

Developing on the APF FPGA

Design Tools Description of tools used to simulate, to synthesize and to download/configure FGPA. ISE WebPack (Xilinx's free devt tool) installation How to setup the FPGA toolchain in Ubuntu/Debian How to simulate post synthesis and post place & route design with GHDL	Using ARMadeus FPGA Manage the FGPA from ARMadeus distribution. Configure the FPGA from Linux Configure the FPGA from U-Boot Access the FPGA address domain from Linux Ho! No FPGA-reset button on armadeus card.
Designs examples This examples give the basis to make VHDL design for FPGA. LED Button and LED Button, Linux drivers, Wishbone bus communication and LED For complex projects, POD should be use to simplify design.	VHDL VHDL coding styles Nice ideas/examples to look at www.opencores.org An Introductory VHDL Tutorial
Peripheral On Demand POD is a Python tool that allows you to easily create FPGA bitstream for your embedded system, from several Open Source IPs. Introduction Global description Specifications POD specification sources repository Use cases Tutorial 1 : i2c-led-button Tutorial 2 : uart	Links Some useful links. Wishbone official Wishbone specifications Wikipedia Wishbone doc Spartan Spartan-3 FPGA Family Data Sheet Orchestra Orchestra website Orchestra project page