Difference between revisions of "Wireless extension board"
From ArmadeusWiki
(add figure) |
(add linux config) |
||
| Line 5: | Line 5: | ||
[[Image:apw_full.png|center|frame|'''Figure 1''': APW with all options populated]] | [[Image:apw_full.png|center|frame|'''Figure 1''': APW with all options populated]] | ||
| + | |||
| + | ==Linux configuration== | ||
| + | * Linux will have to be configured in order to tell it that an APW is connected to your APF27Dev: | ||
| + | <pre class="host"> | ||
| + | $ make linux26-menuconfig | ||
| + | </pre> | ||
| + | <pre class="config"> | ||
| + | System Type ---> | ||
| + | Freescale MXC Implementations ---> | ||
| + | ... | ||
| + | Extension board (Wireless (APW)) ---> | ||
| + | [ ] GSM/GPRS Modem (NEW) | ||
| + | [ ] Bluetooth & WiFi module (NEW) | ||
| + | [ ] CSI (Camera) pass-through (NEW) | ||
| + | [ ] GPS module (NEW) | ||
| + | </pre> | ||
| + | Select the options installed on your APW board. | ||
| + | |||
| + | <pre class="host"> | ||
| + | $ make linux26 | ||
| + | </pre> | ||
| + | * reflash you Linux kernel | ||
==Using the interfaces from Linux== | ==Using the interfaces from Linux== | ||
Revision as of 15:50, 14 January 2010
This extension board (APW) from Armadeus Systems, designed to be pluggable on an APF27Dev, will give your system the following wireless capabilities (depending on the options you selected):
Figure 1: APW with all options populated
Linux configuration
- Linux will have to be configured in order to tell it that an APW is connected to your APF27Dev:
$ make linux26-menuconfig
System Type --->
Freescale MXC Implementations --->
...
Extension board (Wireless (APW)) --->
[ ] GSM/GPRS Modem (NEW)
[ ] Bluetooth & WiFi module (NEW)
[ ] CSI (Camera) pass-through (NEW)
[ ] GPS module (NEW)
Select the options installed on your APW board.
$ make linux26
- reflash you Linux kernel
Using the interfaces from Linux
- WiFi: use Linux libertas driver
- GPS
- GSM/GPRS
Links
Board info page on Armadeus Systems website (datasheet, schematics)
