Search results
From ArmadeusWiki
Create the page "Buildroot" on this wiki! See also the search results found.
Page title matches
Page text matches
- {{Note|Xenomai is now (starting from Armadeus 3.1 release) integrated in our Buildroot. Following instructions are only given as references !}} ==Explanation of the process used to install & deploy Xenomai on Buildroot==8 KB (1,135 words) - 18:07, 4 September 2013
- During Buildroot's Cross Compiler configuration be sure to have choosen following options:281 bytes (41 words) - 19:22, 18 March 2009
- > load_image /home/{mydir}/armadeus/buildroot/project_build_armv5te/apf27/u-boot-1.3.4/u-boot-nand.bin 0xA0000000 Comment out the following lines in the patched U-boot code in buildroot/project_build_armv5te/apf27/u-boot-1.3.4:26 KB (3,781 words) - 18:23, 3 June 2016
- ...ith bad colours. To correct that you have to modify the following files: ''buildroot/output/build/linux-2.6.38.8/arch/arm/mach-mx5/apf51dev-baseboard.c'' and ch2 KB (335 words) - 09:52, 31 March 2015
- ** it may be installed by default on your rootfs depending on your Buildroot defconfig.2 KB (368 words) - 16:54, 1 April 2016
- ** [[Save_buildroot_configuration|explain how to save your Buildroot configurations]] ** [[External_Toolchains|explain how to use external toolchains in Buildroot]]34 KB (4,583 words) - 15:35, 17 March 2015
- To use straton runtime under Armadeus boards, simply select it under Buildroot menuconfig:4 KB (652 words) - 16:55, 11 January 2017
- Now that you have built and "installed" the Armadeus SDK (based on Buildroot), we will show you how to transfer the generated images to your board.250 bytes (36 words) - 13:51, 18 May 2009
- Pour les installer, on utilise Buildroot: * quittez buildroot et faite un make du répertoire3 KB (447 words) - 14:53, 28 September 2009
- * Not mandatory but useful to add some Buildroot packages:1 KB (148 words) - 14:17, 18 June 2014
File:SDLbuildroot.jpg Installation de la SDL avec buildroot(466 × 327 (20 KB)) - 14:29, 26 May 2009- $ $ARMADEUS/buildroot/toolchain/patch-kernel.sh $ANDROID_KERNEL $ARMADEUS/downloads patch-2.6.29. $ $ARMADEUS/buildroot/toolchain/patch-kernel.sh $ANDROID_KERNEL $ARMADEUS/patches/linux/2.6.29 \*23 KB (3,286 words) - 15:28, 3 November 2011
- : CMake infrastructure has been integrated in Buildroot since the BR release 2011.02 (available in Armadeus SDK since the armadeus- Armadeus-4.0 uses the Buildroot 2010.11 release5 KB (763 words) - 23:54, 7 March 2012
- * In Buildroot, if you don't have configured the C++ cross-compiler yet (done in default c * After all these checks, activate libts package in Buildroot configuration:2 KB (322 words) - 15:21, 6 July 2011
- * First, you have to enable this tool in Buildroot (package selection for target -> Hardware handling / blockdevices and files636 bytes (98 words) - 16:18, 18 June 2009
- ...c2668ef0781326f629eef02cef6c3962b8a.tar.gz | tar -C /home/xxx/armadeus-3.2/buildroot/build_armv5te -xf - rm -rf /home/xxx/armadeus-3.2/buildroot/build_armv5te/mtd-utils-a8ce7c2668ef0781326f629eef02cef6c3962b8a3 KB (438 words) - 14:30, 23 August 2010
- [[Category: Buildroot]]5 KB (842 words) - 14:19, 17 September 2018
- ''buildroot/project_build_armv5te/<project_name>/u-boot-1.3.4/include/configs/apf27.h'' ''buildroot/target/device/armadeus/apf27/apf27.h13 KB (1,818 words) - 12:47, 10 December 2019
- Quake is integrated in Buildroot on latest [[GIT]] snapshots. It needs SDL, SDL_mixer & SDL_net. Video was t * Launch Buildroot configuration:2 KB (384 words) - 10:50, 20 May 2015
- ===Buildroot=== A new file 'ubinize.cfg' defining the ubi volumes is located in ''buildroot/target/ubifs/''. This file contains the different UBI volumes of the UBI im4 KB (621 words) - 11:43, 10 January 2019
- * Launch Buildroot configuration3 KB (488 words) - 13:35, 21 July 2014
- ...ng your [[Communicate#TFTP_server|TFTP]] points to ''/tftpboot/'') to your Buildroot's rootfs skeleton: $ cp /tftpboot/passwd buildroot/target/device/armadeus/rootfs/target_skeleton/etc/3 KB (472 words) - 09:48, 11 October 2013
- ===Buildroot=== The library is included in Buildroot menu, to use it just select it (if not already installed on your target, li14 KB (2,115 words) - 18:35, 1 August 2018
- $ ./buildroot/output/host/usr/bin/arm-linux-gcc -mfpu=neon -mcpu=cortex-a9 neon.c (APF $ ./buildroot/output/host/usr/bin/arm-linux-gcc -mfpu=neon -mcpu=cortex-a8 neon.c (APF3 KB (468 words) - 18:42, 1 June 2018
- ...board_info'' must be modified in platform file apf27-dev.c (in directory ''buildroot/output/build/linux-2.6.29.6/arch/arm/mach-mx2/'') : $ cp ../buildroot/output/build/linux-x.x.x/Documentation/spi/spidev_test.c .4 KB (648 words) - 16:40, 31 January 2018
- ==Buildroot status== * [[Current Buildroot status in Armadeus]]369 bytes (52 words) - 08:31, 21 August 2015
- ==Current Buildroot version== ...t/'' ([http://sourceforge.net/p/armadeus/code/ci/armadeus-5.3/tree/patches/buildroot/])20 KB (1,921 words) - 09:32, 7 January 2014
- * Select the package in Buildroot menuconfig:2 KB (246 words) - 17:03, 30 December 2009
- {{Warning|Last steps of uucp installation are still failing, so Buildroot will give you an error even if main tools were correctly installed in your2 KB (245 words) - 14:24, 2 September 2010
- ...s are now stored in ''buildroot/configs/apfxx_defconfig'' and no more in ''buildroot/target/device/armadeus/apfxx/apfxx_defconfig'' ''buildroot/target/device/armadeus/apf27/uClibc-0.9.30.config.arm''14 KB (1,899 words) - 20:38, 7 February 2018
- * Old way for old Buildroot is kept [[Talk:Using_Initial_RAM_disk|here]]. * With recent armadeus BSPs (== with recent Buildroot), you can configure the initrd building this way:3 KB (439 words) - 10:50, 27 July 2015
- $ ./buildroot/project_build_armv5te/apf27/u-boot-1.3.4/tools/mkimage -n 'MyRamDisk' -A ar668 bytes (105 words) - 18:23, 20 September 2013
- Goto the buildroot packages and enable the Java package and from the java sub menu select both3 KB (584 words) - 23:17, 8 September 2011
- Buildroot can automatically build these tools for you. You just have to:5 KB (721 words) - 10:52, 14 September 2018
- * You'll need to activate a few plugins in Buildroot menuconfig to play videos with Gstreamer: * To test your Gstreamer installation, you need to select a plugin in Buildroot menuconfig:8 KB (990 words) - 16:13, 14 December 2017
- The buildroot openCV package is not available yet in the buildroot version used by ARMadeus, however I will explain a little workaround to cro == Buildroot configuration ==10 KB (1,376 words) - 18:11, 4 September 2013
- set(ARMADEUS_ROOT_BR ${ARMADEUS_ROOT}/buildroot) This file should be generated by Buildroot at the time of the Armadeus SDK setup.3 KB (413 words) - 01:45, 8 June 2010
- * add cwiid package to Buildroot:1 KB (187 words) - 18:11, 4 September 2013
- ...test and calibrate the joystick. To use it select joysticktest package in buildroot : For example, with as5011 plugged on i2c bus 1, this code must be added in buildroot/project_build_armv5te/apf27/linux-2.6.29.6/arch/arm/mach-mx2/apf27-dev.c :6 KB (822 words) - 18:17, 4 September 2013
- {{Note| PyWebRadio will only run with 2010.xx Buildroot version which is under very early integration stage}}789 bytes (117 words) - 11:30, 22 July 2010
- #REDIRECT [[Buildroot Mainline integration]]44 bytes (4 words) - 14:59, 13 March 2012
- ===Buildroot status=== * [[Current Buildroot status in Armadeus]]6 KB (866 words) - 12:24, 9 August 2018
- ==Buildroot status== * [[Current Buildroot status in Armadeus]]430 bytes (53 words) - 08:32, 21 August 2015
- ==Buildroot status== * [[Current Buildroot status in Armadeus]]477 bytes (68 words) - 08:32, 21 August 2015
- Sacrify the large file support in Buildroot (needs to also remove alsa-utils):724 bytes (103 words) - 15:07, 14 June 2011
- =====Buildroot===== * First run this command to open the Buildroot configuration menu:18 KB (2,369 words) - 20:40, 4 September 2013
- ...evt board ''.dts'' description file and not by selecting drivers (ex ''bsp/buildroot/output/build/linux-4.8.10/arch/arm/boot/dts/imx6ul-opos6uldev.dts'').6 KB (876 words) - 10:46, 29 April 2019
- On your host-pc go to the armadeus toolchains buildroot cd ~/armadeus/buildroot6 KB (969 words) - 10:22, 8 June 2011
- There is a Buildroot packet for tftpd server, but to install it, you have to be sure that follow1 KB (161 words) - 10:17, 16 May 2017
- ...ion is based to the APF28dev board and the modifications must be done into buildroot/output/build/linux-xxx/arch/arm/boot/dts/imx28-apf28dev.dts. * a linux code, available in buildroot/output/build/linux-xxx/include/uapi/linux/input.h4 KB (601 words) - 16:52, 21 June 2017
- ...ches and follow as much as possible the a common strategy already used for Buildroot and the Linux kernel. ...mentioned here above in buildroot/boot/u-boot - instead of the legacy path buildroot/target/u-boot15 KB (2,370 words) - 10:39, 8 September 2013
- Not mandatory but useful to add for compiling some Buildroot packages:3 KB (476 words) - 11:27, 29 March 2021
- # cp -r ${YOUR_BSP_PATH}/buildroot/output/target/boot rootfs/ # cp -r ${YOUR_BSP_PATH}/buildroot/output/target/lib/modules rootfs/lib/17 KB (2,771 words) - 18:23, 8 October 2019
- ''buildroot/target/device/armadeus/apf51/apf51-u-boot-2010.03.h''5 KB (750 words) - 17:14, 7 September 2021
- ...uration for the APF27 can be found in the file apf27.h in u-boot sources : buildroot/target/device/armadeus/apf27/apf27-u-boot-1.3.4.h5 KB (758 words) - 09:33, 12 February 2015
- OpenTyrain is integrated in Armadeus Buildroot. It needs SDL & SDL_net. Video was taken on the 7" LCD. Runs at full speed * Launch Buildroot configuration:2 KB (282 words) - 20:16, 18 January 2012
- ==Buildroot 2011.05 downloading failure== ...--passive-ftp --tries=3 -P downloads http://buildroot.uclibc.org/downloads/buildroot-2011.05.tar.bz22 KB (209 words) - 19:13, 16 March 2012
- You have to edit the [[APF28Dev]]'s device tree file. The file is ''buildroot/output/build/linux-XXX/arch/arm/boot/dts/imx28-apf28dev.dts'' . * Copy the new dtb file (located in ''buildroot/output/images'') in your [[tftpboot]] directory and update it on your board2 KB (240 words) - 11:42, 18 August 2015
- ...instead of mdev for example, then you will have to activate corresponding Buildroot packages (eg usbmount) * http://lists.busybox.net/pipermail/buildroot/2011-August/045187.html3 KB (531 words) - 20:43, 17 September 2014
- === Buildroot === * Qt Creator is now fully integrated in Armadeus Buildroot. To install it, go in your project's BSP directory and use the command:4 KB (680 words) - 15:28, 26 March 2012
- buildroot/target/device/armadeus/apf28/apf28-u-boot-2013.04.h3 KB (439 words) - 17:07, 28 March 2017
- ...timized debian packages. Resulting rootfs is still far from compactness of Buildroot's generated one but start to be usable on the APF configurations. ...possible. So you won't need to change anything in u-boot configuration and buildroot will only be used to fetch and patch the kernel. The latter could have been10 KB (1,611 words) - 10:35, 21 January 2013
- * or configured inside Buildroot (2013.05+), here for [[APF51]]: Only recent Buildroot have direct support for dtb image generation (example for APF51):6 KB (987 words) - 10:20, 16 September 2020
- == Buildroot packages == Some other packages are available under buildroot. To see it launch buildroot menuconfig :3 KB (400 words) - 16:51, 16 October 2013
- In this page you will learn how to save Buildroot and Linux configuration for a project. == Buildroot ==988 bytes (147 words) - 10:41, 12 September 2013
- ...code shall use the Linux kernel "coding style". Details are given here: ''buildroot/output/build/linux-x.x/Documentation/CodingStyle'' ...e can use the following script to automagically indent its source files: ''buildroot/output/build/linux-x.x/scripts/Lindent''1 KB (197 words) - 07:47, 15 October 2012
- ** You can customize your environment variable from BuildRoot: make menuconfig -> boot loaders -> U-Boot -> Environment image -> source f16 KB (2,089 words) - 16:30, 30 September 2013
- Gnokii is available under buildroot menuconfig :3 KB (370 words) - 15:39, 14 April 2013
- Le compilateur croisé est installé dans ''armadeus/buildroot/build_arm/staging_dir/bin/'' et est appelé ''arm-linux-gcc'' * soit en ajoutant ''armadeus/buildroot/build_arm/staging_dir/bin/'' à votre variable d'environnement ''PATH'' et3 KB (455 words) - 11:15, 10 April 2013
- ...enEmbbeded and will probably never do ([http://lists.busybox.net/pipermail/buildroot/2011-November/047229.html]), you can still generate a package for your cust ...ssume that you already integrated your application in Buildroot and that ''buildroot/package/my_app/'' is existing.1 KB (223 words) - 10:30, 4 June 2013
- Host part of Beremiz is installable through Armadeus Buildroot menuconfig : $ python buildroot/output/host/opt/beremiz/Beremiz.py2 KB (335 words) - 17:11, 31 July 2014
- On armadeus SDK, this file is in this directory: buildroot/target/device/armadeus/<board>/<board>-u-boot-<version>.h For example, for u-boot 2012.04 on apf27, it's: buildroot/target/device/armadeus/apf27/apf27-u-boot-2012.04.h2 KB (250 words) - 17:05, 23 September 2013
- By default on buildroot there is no password for root user. It is not really secure and can be a pr ...have to put it in our shadow file under rootfs. To do that, edit your file buildroot/output/target/etc/shadow, and replace the line:2 KB (278 words) - 09:53, 11 October 2013
- ===Buildroot===4 KB (604 words) - 17:15, 2 October 2015
- ...rning|This Window Manager is no more maintained and has been deprecated in Buildroot 2017.xx+}}702 bytes (86 words) - 12:15, 9 October 2017
- "Real" distributions usable on APF boards (lot bigger than Buildroot).4 members (0 subcategories, 0 files) - 23:08, 22 July 2014
- All drivers are already selected by default in APF6's Buildroot configuration.3 KB (431 words) - 11:59, 5 February 2016
- == Buildroot configuration ==2 KB (284 words) - 16:23, 21 April 2021
- * In Buildroot, don't use gcc 4.8 version to build APF28/27 images, then won't boot. Defau254 bytes (41 words) - 18:20, 15 July 2015
- * Untar the archive generated by your bsp (in ''buildroot/output/images/'')4 KB (606 words) - 15:23, 21 May 2021
- $ cp buildroot/output/images/*-linux.bin /tftpboot/2 KB (375 words) - 17:46, 25 July 2018
- BSP_APF6_BROUTPUT := /usr/local/projects/armadeus/apf6/buildroot/output/ ...t/usr/bin/arm-linux-gnueabihf-ld OBJDUMP=/usr/local/projects/armadeus/apf6/buildroot/output/host/usr/bin/arm-linux-gnueabihf-objdump13 KB (1,984 words) - 13:27, 5 July 2021
- * Launch Buildroot's configuration: ...ead, do all changes on the filesystem "image" located on your Host PC in ''buildroot/output/target/''.7 KB (1,119 words) - 18:10, 20 April 2016
- $ /xxx/buildroot/output/host/usr/bin/arm-linux-gnueabihf-objdump -d examples/standalone/hell2 KB (303 words) - 12:49, 30 May 2016
- ! Buildroot !! Debian2 KB (300 words) - 16:19, 31 May 2017
- ! Buildroot !! Debian ! Buildroot !! Debian5 KB (854 words) - 19:01, 21 April 2017
- ! Buildroot !! Debian1 KB (132 words) - 12:11, 31 March 2017
- ===Buildroot===476 bytes (57 words) - 17:35, 31 March 2017
- ! Buildroot !! Debian2 KB (220 words) - 11:10, 31 March 2017
- $ ../../../buildroot/output/host/usr/bin/arm-linux-gnueabihf-gcc -o fb_alpha fb_alpha.c1 KB (199 words) - 15:07, 20 April 2017
- * Depending on your board, you may have a Buildroot defconfig to apply preempt-rt automatically. For example:2 KB (244 words) - 19:07, 12 July 2017
- buildroot/output/build/linux-4.17.4/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi1 KB (164 words) - 18:17, 25 July 2018
- FuseSoC is like Buildroot or Yocto used for Linux, it's just a «Makefile» that launch different too4 KB (582 words) - 14:48, 3 August 2020
- * shellinabox tool is packaged in Buildroot, so all we hav to do is to select it, rebuild our rootfs and reflash it on $ cp buildroot/output/images/xxx-rootfs.xxx /tftpboot2 KB (389 words) - 16:06, 2 August 2019
- ...e si nous souhaitons monter le répertoire de téléchargement des packets buildroot ainsi que le répertoire du bsp armadeus nous utiliserons la commande :10 KB (1,549 words) - 10:37, 21 February 2022
