Search results
From ArmadeusWiki
Create the page "Linux" on this wiki! See also the search results found.
Page title matches
- Image Name: Linux-2.6.27.13 Image Type: ARM Linux Kernel Image (uncompressed)13 KB (1,753 words) - 20:03, 7 March 2009
- Tips to do debugging under Linux. On this page, you will find usefull informations for debugging your Linux kernel/drivers.5 KB (743 words) - 10:31, 3 May 2019
- You will need a RS232 terminal emulator to communicate with U-Boot/Linux console. You can choose between: In order to send your image files (U-Boot, Linux, rootfs or FPGA's firmware) at higher speed to your Armadeus board, you can4 KB (546 words) - 09:58, 8 October 2015
- ...e used to do read or write accesses (16 or 32 bits wide) to the FPGA, from Linux userspace/console. The O_SYNC option is recommended to avoid Linux to cache the content of /dev/mem and delay any modification done in this fi4 KB (567 words) - 10:59, 27 February 2017
- This page summarizes all you need to know before starting to develop Linux drivers for your Armadeus board * Linux Device Drivers (3rd edition) book: http://lwn.net/Kernel/LDD3/2 KB (276 words) - 17:55, 4 September 2013
- ...pour le développent et la synthèse FPGA ISE WebPack pour le système GNU/Linux]. ...m sur cette page]. Choisir ''Download ISE WebPACK software for Windows and Linux''2 KB (383 words) - 21:17, 1 August 2010
- *Sascha Hauer (Pengutronix) - initial 2.6 Linux i.MX support. ** http://pasiphae.extern.pengutronix.de/?p=imx/linux-2.6.git;a=summary912 bytes (139 words) - 21:17, 1 August 2010
- #REDIRECT [[Trash Fr:Linux sur i.MXL]]38 bytes (7 words) - 21:18, 1 August 2010
- This page details the installation and the usage of the Linux drivers for the [[TSC2102|TSC210x chips]] (touch & temp/voltage control). S ...2_Linux_driver|Here]] you will find instructions to know how we configured Linux to activate these drivers (may be useful if you want to deactivate them).3 KB (368 words) - 02:45, 10 August 2011
- ==Xilinx WebPack installation instructions for Linux Ubuntu (6.10) with ISE 10.1.==4 KB (686 words) - 11:57, 20 January 2022
- Conseils pour déboguer sous Linux ...page, vous trouverez des informations utiles au débogage d'Armadeus sous Linux3 KB (474 words) - 15:46, 4 April 2012
- ...t vous avez besoin de savoir avant de commencer à développer les pilotes Linux pour votre carte Armadeus. * Le livre Linux Device Drivers (3rd edition): http://lwn.net/Kernel/LDD3/2 KB (287 words) - 21:28, 1 August 2010
- Sascha Hauer (Pengutronix) - support initial sur Linux 2.6.<br> * http://rtime.felk.cvut.cz/darcs/darcsweb.cgi?r=ppisa-linux-devel;a=summary881 bytes (142 words) - 21:18, 1 August 2010
-
1 KB (183 words) - 11:25, 5 August 2009
- Bien que applicables à toute plateforme Linux embarqué supportant un noyau récent et Buildroot, mes essais ont été co ...depuis Linux. Comme le TSC regroupe plusieurs fonctionnalités les pilotes Linux nécessaires à son utilisation seront divisés en plusieurs couches/classe7 KB (1,281 words) - 23:07, 2 March 2008
- ...rmations to use the [[ISP1761|DevFull's ISP1761 USB Host controller]] with Linux. With recent version of Armadeus (svn version 978 or higher ) ISP1761 drive $ make linux-menuconfig3 KB (476 words) - 15:20, 17 July 2009
- ...unction names, we have to look in the System.map file which stores all the Linux kernel function offset. ...-V buildroot/build_armv4t/linux-2.6.23.1/vmlinux -m buildroot/build_armv4t/linux-2.6.23.1/System.map --no-ksyms --no-lsmod \13 KB (2,083 words) - 16:18, 14 February 2012
- * 012-linux-2.6.23.1-apm9328.diff ...background:#00ff00;" | OK || NA || style="background:#00ff00;" | MMC OK || Linux boot on MMC Ok4 KB (542 words) - 00:09, 3 December 2007
- ** linux/usb_gadget.h est devenu linux/usb/gadget.h -> à changer dans drivers/usb/gadget/imx_udc.c ** l'ISP166x est maintenant intégré dans Linux (non testé). Notre driver ne compile plus.3 KB (347 words) - 11:27, 5 August 2009
- #REDIRECT [[Trash Fr:Développement de pilotes linux]]54 bytes (8 words) - 21:28, 1 August 2010
- An embedded Linux system is very similar (when speaking about software) to a Desktop one, tha * an operating system = the '''Linux kernel'''2 KB (247 words) - 09:31, 22 November 2016
- ...nt CAN bus driver uses SocketCAN API which is now the official CAN API for Linux. SocketCAN is based on the Linux socket. Further details can be found on the links at the bottom of this pag5 KB (783 words) - 11:10, 31 July 2018
- $ make linux-menuconfig826 bytes (114 words) - 18:02, 4 September 2013
- On this page we will explain you how to change the Boot Logo/Screen of Linux. # Linux will automatically convert your .ppm to a .c file, after you have added it4 KB (618 words) - 11:28, 21 June 2018
- This page summarizes all the important things to know when talking about Linux drivers in general. Linux drivers are the piece of code running inside the kernel itself that are ass2 KB (291 words) - 22:42, 11 June 2009
- **ISP176x seems to be integrated in Linux but seems "lighter" than ours (NXP). So we will keep NXP one. ...le="background:#00ff00;" | OK || NT || style="background:#00ff00;" | OK || Linux boot on MMC Ok7 KB (778 words) - 17:34, 18 April 2009
- * Patches to port: ''buildroot/target/device/armadeus/linux/kernel-patches/2.6.29/'' ...linux/kernel-patches/2.6.29/000-foo.patch buildroot/target/device/armadeus/linux/kernel-patches/2.6.38/23 KB (2,772 words) - 15:50, 8 June 2012
- The APF27 Linux distribution can be found here: [https://gitlab.com/armadeus/armadeus-bsp/- Currently (Armadeus-6.0) supported Linux version is: '''2.6.29.6'''.7 KB (723 words) - 13:49, 30 June 2022
- How to use the APF's serial ports on Linux. On Linux, all serial ports are driven the same way. Only their device nodes are chan4 KB (587 words) - 09:58, 26 July 2018
- #REDIRECT [[Trash Fr:Installation de ISE sur Ubuntu Linux]]59 bytes (9 words) - 21:17, 1 August 2010
- #REDIRECT [[Trash Fr:Installation de ISE sur Ubuntu Linux]]59 bytes (9 words) - 21:17, 1 August 2010
- $ make linux-menuconfig784 bytes (107 words) - 18:06, 4 September 2013
- #REDIRECT [[Communicate with your board from a Linux Host (Basics)]]68 bytes (10 words) - 19:24, 25 February 2009
- ...le="background:#00ff00;" | OK || NT || style="background:#00ff00;" | OK || Linux boot on MMC Ok8 KB (885 words) - 08:54, 11 July 2012
- [[Category: Linux]] ...'' and ''setenv''. It can be helpful to read and set these variables from Linux as well, for ex. to remote control some U-Boot processes like software upda5 KB (721 words) - 10:52, 14 September 2018
- Linux video capture interface: v2.00 $ make CC=$ARMADEUS_TOOLCHAIN_PATH/arm-linux-gcc2 KB (324 words) - 18:55, 9 November 2010
- * Patch proposal on linux-media: ** 1rst try ? http://osdir.com/ml/linux-media/2009-08/msg00569.html1 KB (183 words) - 18:32, 20 April 2010
- #REDIRECT [[Trash Fr:Débogage Linux]]38 bytes (6 words) - 21:27, 1 August 2010
- ..._Software_Installation#FPGA_firmware_installation|here]]) or directly from Linux as described herewith. Under Linux:1 KB (207 words) - 08:38, 27 August 2015
- #REDIRECT [[APF9328 and APF27 migration to Linux 2.6.38]]57 bytes (7 words) - 10:00, 7 February 2011
- ==Linux configuration== $ make linux-menuconfig4 KB (517 words) - 10:52, 3 October 2017
- The [[APF51]] Linux distribution can be found here: [http://sourceforge.net/project/showfiles.p Currently (armadeus-5.3) default supported Linux version for [[APF51]] is: '''2.6.38.8'''.7 KB (801 words) - 12:00, 13 January 2014
- == Write a Linux device platform source == Add the driver in your Linux configuration5 KB (791 words) - 15:44, 15 July 2015
- selectprojecttree your_armadeus_directory/target/linux/modules/fpga/POD driver.selectprojecttree your_armadeus_directory/target/linux/modules/fpga/POD11 KB (1,644 words) - 14:30, 7 February 2013
- The APF28 Linux distribution can be found here: [http://sourceforge.net/project/showfiles.p Currently (in armadeus-5.3), supported Linux versions are: '''Freescale's 2.6.35.3''' (version by default) and '''vanill6 KB (633 words) - 13:47, 26 December 2013
-
20 bytes (2 words) - 09:56, 5 September 2012
- The [[APF6]] Linux distribution can be found here: [http://sourceforge.net/project/showfiles.p Currently (armadeus-6.0) default supported Linux version for APF6 is: '''vanilla 3.19'''.8 KB (939 words) - 11:43, 2 August 2018
- ...ked question from people who came from microcontroler/dsp world. But under Linux applications it is not the way to do that, we have to «block» on the inte In this article we will talk about gpio interruptions using the [[GPIOlib]] Linux driver under a C program.516 bytes (72 words) - 09:50, 5 June 2014
- tar -xvf Quartus-web-14.0.0.200-linux.tar USB-BLaster is an USB JTAG adaptor usefull to debug altera FPGA. Under Linux some rights must be added to use it with quartus.4 KB (644 words) - 15:53, 12 November 2019
- This page is a tutorial on how to install Vivado on Debian Linux host computer.2 KB (298 words) - 17:33, 30 June 2021
Page text matches
- ...rootfs to a MMC/SD card in ext2 (or change it in the fstab), also copy the linux kernel to the rootfs /boot folder: $ sudo cp $ARMADEUS_BINARIES/$ARMADEUS_BOARD_NAME-linux.bin /media/mmc/boot3 KB (443 words) - 01:36, 25 July 2013
- Sur Linux (et MAC?), NFS fait partie de votre distribution donc vous ne devriez pas a3 KB (506 words) - 21:14, 1 August 2010
- ...our terminal like on this [[Linux start screenshot | screenshot]] (Default Linux login is "root" with an empty password). '''If your system is NOT starting' # If Linux has successfully started, your system is operational. If you want to add ap3 KB (476 words) - 15:11, 4 June 2019
- Image Name: Linux-2.6.27.13 Image Type: ARM Linux Kernel Image (uncompressed)13 KB (1,753 words) - 20:03, 7 March 2009
- setenv rootpath "/tftpboot/apfXX-root" (to boot Linux over NFS) ==Advanced Linux boot==6 KB (957 words) - 16:30, 13 May 2015
- ...ask you to specify the serial port on which the board is connected. Under Linux please use ''/dev/ttySx'' or ''/dev/ttyUSBx'' and under Window$ use COMx. Enter serial port number or name to use (/dev/ttySx under Linux and COMx under Windows):11 KB (1,731 words) - 16:31, 6 May 2020
- On this page you will find usefull informations to have a working Linux Framebuffer on your board. Linux Framebuffer is the lowest level (standardized) API for userspace programs t4 KB (604 words) - 13:16, 18 January 2023
- filesystem, and so it's possible to directly use some Linux standard functions [[Category:Linux drivers]]7 KB (1,085 words) - 17:41, 12 December 2011
- This boot procedure is usefull to test a modified rootfs and/or a linux kernel keeping safe the original flash memory content of your board. * The copy of the Linux kernel to the NFS ''/boot'' folder, makes possible to also download it with8 KB (1,232 words) - 13:17, 1 February 2022
- {{Note|This page explains how to transfer files on the board when the Linux system has started, '''not from U-Boot !'''. == Linux ==3 KB (469 words) - 18:31, 1 February 2022
- * load ''g_file_storage'' or ''g_mass_storage'' module (depending on your Linux version): On your Linux Host:7 KB (1,087 words) - 21:23, 31 March 2020
- All needed drivers are included in the standard Armadeus Linux image. You should see something like that on the Linux console:6 KB (993 words) - 14:54, 7 July 2020
- [[Category:Linux drivers]]894 bytes (143 words) - 23:56, 27 October 2009
- ==Linux== * [[Linux Debug |Tips to debug under Linux]]3 KB (383 words) - 15:12, 1 April 2020
- ===Linux configuration=== To use a touchscreen, there are some drivers to install in Linux.19 KB (2,628 words) - 16:58, 3 November 2016
- Tips to do debugging under Linux. On this page, you will find usefull informations for debugging your Linux kernel/drivers.5 KB (743 words) - 10:31, 3 May 2019
- Use [[Linux driver for FPGA controlled keyboards| this Linux driver]] to control this IP.2 KB (348 words) - 21:33, 1 August 2010
- {{Note|For instructions on how to use MMC/SD on Linux, see the [[MultiMediaCard]] page. (Here you will only find hardware details * [[MultiMediaCard|How to use MMC/SD/microSD on Linux]]7 KB (813 words) - 10:36, 22 July 2012
- Pour savoir comment utiliser la MMC/SD sous Linux, consultez la page [[MultiMediaCard]].1 KB (192 words) - 21:32, 1 August 2010
- Generally on Linux you would need a kernel part (=driver) and a user space part (=library) to Use Linux Armadeus [[GPIO_Driver|GPIO driver with it's PPDEV emulation]]3 KB (390 words) - 16:43, 13 July 2015
- ...for our own pleasure and also to help universities and enthusiasts develop Linux embedded systems. <br> ...eus BSP release and so default LCD is Sharp LQ043. You have to change your Linux configuration to support your LCD. Please follow instructions on [[FrameBuf3 KB (538 words) - 12:34, 30 June 2022
- * Linux should be compiled with USB Host driver as static ('''done by default in cu $ make linux-menuconfig1 KB (194 words) - 18:49, 6 August 2018
- ...ion environments from bare-metal to platform operating systems such as ARM Linux. * At that time there are 2 ABIs used for ARM Linux:2 KB (232 words) - 16:42, 1 April 2008
- During a second buildroot compiling, the compiler does not use the right Linux ''utils-linux'' and then compile again. ...... this will not work ).953 bytes (144 words) - 12:36, 30 June 2022
- ...oftware Development Kit''" (SDK) aka "''Board Support Package''" (BSP) for Linux/Window$ Hosts. ...bc.org/ Buildroot]: set of Makefiles that allow to entirely build embedded Linux systems3 KB (417 words) - 19:34, 14 November 2017
- <big>How-To install Armadeus Software Development Kit (SDK) on Linux systems. This SDK is currently based on the (excellent) [http://buildroot.n ...1.20 or later to compile the Linux Kernel - Please update or upgrade your Linux distribution.12 KB (1,782 words) - 16:12, 30 January 2024
- *Now you have a complete Linux OS. Linux can be started by double clicking on the .vmx file.5 KB (740 words) - 12:39, 30 June 2022
- ...update (from U-Boot) the Flash's partitions of your APF module storing the Linux, rootfs and U-Boot software images. BIOS> setenv rootpath "/tftpboot/apf9328-root" (to boot Linux over NFS)19 KB (2,783 words) - 09:46, 9 September 2021
- In order to send your image files (U-Boot, Linux, rootfs or FPGA's firmware) at higher speed (than serial port) to your Arma ...ed directory (''/tftpboot'' by default) will be accessible from the U-Boot/Linux TFTP clients.5 KB (752 words) - 12:17, 15 April 2021
- In order to send your files (U-Boot, Linux, rootfs ...) with higher speed to the armadeus board, you can use a TFTP se1 KB (222 words) - 15:08, 17 November 2009
- You will need a RS232 terminal emulator to communicate with U-Boot/Linux console. You can choose between: In order to send your image files (U-Boot, Linux, rootfs or FPGA's firmware) at higher speed to your Armadeus board, you can4 KB (546 words) - 09:58, 8 October 2015
- Mplayer is using the [[FrameBuffer|Linux Framebuffer]] to display the videos.<br> * [http://www.linuxjournal.com/video/linux-howto-video-editing-magic-ffmpeg Nice (video) tutorial to edit videos with2 KB (321 words) - 09:22, 20 May 2015
- ...particuliers et les universitaires à développer des systèmes embarqués Linux. L'association est à but non lucratif et fonctionne essentiellement grâce * Linux 2.6 pour le système d'exploitation8 KB (1,233 words) - 12:40, 30 June 2022
- ...s seront affichés dans votre terminal série, un exemple est donné ici [[Linux start screenshot]] <br> *6. Si Linux a démarré correctement, vous pouvez procéder à l'installation de l'envi2 KB (333 words) - 18:59, 27 January 2009
- ...pherals On Demand]], developped by ARMadeus, that simplify FGPA-device and Linux driver integration. ...[[How_to_make_a_VHDL_design_in_Ubuntu/Debian| ISE WebPack installation on Linux]] page for more infos.6 KB (977 words) - 18:56, 12 October 2012
- [[Installation de ISE sur Ubuntu Linux]] ===Configurer le FPGA depuis Linux===4 KB (722 words) - 20:55, 1 August 2010
- * The debugger path is '''buildroot/output/host/usr/bin/arm-linux-gnueabihf-gdb''' * The compiler path is '''buildroot/output/host/usr/bin/arm-linux-gnueabihf-g++'''2 KB (387 words) - 17:13, 3 November 2016
- ...t bien va builder le package.... la folie... y a aussi dans "target/linux/linux-2.4/Makefile" la config kernel qui est incluse pour savoir quels modules so ...servent à générer les rep et fichiers dans "build_arm.../linux-24-brcm/linux-modules/ipkg". Dans ce rep sont mis les rep CONTROL et les modules dans li5 KB (946 words) - 19:12, 9 August 2007
- On this page, you will find all the informations needed to use the Linux FPGA loader driver. ...f your APF board from Linux userspace/shell (ie FPGA reprogrammation after Linux boot).1 KB (230 words) - 08:41, 27 August 2015
- ...e used to do read or write accesses (16 or 32 bits wide) to the FPGA, from Linux userspace/console. The O_SYNC option is recommended to avoid Linux to cache the content of /dev/mem and delay any modification done in this fi4 KB (567 words) - 10:59, 27 February 2017
- ...icroprocesseur/contrôleur. Avec un sous-répertoire pour chaque système (linux, ulinux, ecos, avr, ...) '''''Ce répertoire est optionnel et ne s'applique * un répertoire '''HAL''' avec les fichiers d'un drivers de base (pour Linux ou ''générique'' ?!?)27 KB (4,288 words) - 10:33, 8 October 2008
- This page summarizes all you need to know before starting to develop Linux drivers for your Armadeus board * Linux Device Drivers (3rd edition) book: http://lwn.net/Kernel/LDD3/2 KB (276 words) - 17:55, 4 September 2013
- ...eurs-analyse-de-logs-2 Mars 2007 edition of the French Magazine: GLMF (GNU/Linux Magazine France)].<br>2 KB (271 words) - 00:56, 14 January 2012
- * [http://www.gnurou.org/writing/linuxmag/sdl Tutoriel paru dans Linux Magazine France, entre les numéros 65 et 73.] [[Image:FrenchFlag.png]]3 KB (441 words) - 20:35, 14 February 2012
- <architecture name="linux"> Dans cet exemple, les fichiers seront inclus dans le répertoire ''drivers/linux/'' du zip. L'outil générera un header pour les registres avec le nom du c11 KB (1,747 words) - 17:47, 28 March 2008
- ...(ie sampling slow or fast signals) there are 2 ways to use the ''max1027'' Linux driver: ...a [http://lxr.linux.no/source/Documentation/hwmon/sysfs-interface?v=2.6.18 Linux Hardware Monitoring API (hwmon)] compatible/standardized interface: ''/sys/10 KB (1,519 words) - 18:03, 18 February 2011
- $ arm-linux-gcc -g -o hello hello.c []$ arm-linux-gdb program3 KB (554 words) - 12:40, 3 June 2016
- == Linux driver installation == ...rces (''arch/arm/mach-mx5/apf51dev-baseboard.c''), rebuild and reflash the Linux kernel.}}5 KB (883 words) - 13:30, 10 February 2022
- ...them in a FIFO. At that time it will generate an interrupt to signal i.MXL Linux driver that data are available. We will use LIRC framework. A custom Linux driver will have to be written.4 KB (499 words) - 20:02, 29 October 2008
- First be sure to have the Watchdog Linux driver activated: $ make linux-menuconfig2 KB (343 words) - 13:52, 26 January 2018
