Search results
From ArmadeusWiki
Create the page "Linux" on this wiki! See also the search results found.
Page title matches
- Image Name: Linux-2.6.27.13 Image Type: ARM Linux Kernel Image (uncompressed)13 KB (1,753 words) - 20:03, 7 March 2009
- Tips to do debugging under Linux. On this page, you will find usefull informations for debugging your Linux kernel/drivers.5 KB (743 words) - 10:31, 3 May 2019
- You will need a RS232 terminal emulator to communicate with U-Boot/Linux console. You can choose between: In order to send your image files (U-Boot, Linux, rootfs or FPGA's firmware) at higher speed to your Armadeus board, you can4 KB (546 words) - 09:58, 8 October 2015
- ...e used to do read or write accesses (16 or 32 bits wide) to the FPGA, from Linux userspace/console. The O_SYNC option is recommended to avoid Linux to cache the content of /dev/mem and delay any modification done in this fi4 KB (567 words) - 10:59, 27 February 2017
- This page summarizes all you need to know before starting to develop Linux drivers for your Armadeus board * Linux Device Drivers (3rd edition) book: http://lwn.net/Kernel/LDD3/2 KB (276 words) - 17:55, 4 September 2013
- ...pour le développent et la synthèse FPGA ISE WebPack pour le système GNU/Linux]. ...m sur cette page]. Choisir ''Download ISE WebPACK software for Windows and Linux''2 KB (383 words) - 21:17, 1 August 2010
- *Sascha Hauer (Pengutronix) - initial 2.6 Linux i.MX support. ** http://pasiphae.extern.pengutronix.de/?p=imx/linux-2.6.git;a=summary912 bytes (139 words) - 21:17, 1 August 2010
- #REDIRECT [[Trash Fr:Linux sur i.MXL]]38 bytes (7 words) - 21:18, 1 August 2010
- This page details the installation and the usage of the Linux drivers for the [[TSC2102|TSC210x chips]] (touch & temp/voltage control). S ...2_Linux_driver|Here]] you will find instructions to know how we configured Linux to activate these drivers (may be useful if you want to deactivate them).3 KB (368 words) - 02:45, 10 August 2011
- ==Xilinx WebPack installation instructions for Linux Ubuntu (6.10) with ISE 10.1.==4 KB (686 words) - 11:57, 20 January 2022
- Conseils pour déboguer sous Linux ...page, vous trouverez des informations utiles au débogage d'Armadeus sous Linux3 KB (474 words) - 15:46, 4 April 2012
- ...t vous avez besoin de savoir avant de commencer à développer les pilotes Linux pour votre carte Armadeus. * Le livre Linux Device Drivers (3rd edition): http://lwn.net/Kernel/LDD3/2 KB (287 words) - 21:28, 1 August 2010
- Sascha Hauer (Pengutronix) - support initial sur Linux 2.6.<br> * http://rtime.felk.cvut.cz/darcs/darcsweb.cgi?r=ppisa-linux-devel;a=summary881 bytes (142 words) - 21:18, 1 August 2010
-
1 KB (183 words) - 11:25, 5 August 2009
- Bien que applicables à toute plateforme Linux embarqué supportant un noyau récent et Buildroot, mes essais ont été co ...depuis Linux. Comme le TSC regroupe plusieurs fonctionnalités les pilotes Linux nécessaires à son utilisation seront divisés en plusieurs couches/classe7 KB (1,281 words) - 23:07, 2 March 2008
- ...rmations to use the [[ISP1761|DevFull's ISP1761 USB Host controller]] with Linux. With recent version of Armadeus (svn version 978 or higher ) ISP1761 drive $ make linux-menuconfig3 KB (476 words) - 15:20, 17 July 2009
- ...unction names, we have to look in the System.map file which stores all the Linux kernel function offset. ...-V buildroot/build_armv4t/linux-2.6.23.1/vmlinux -m buildroot/build_armv4t/linux-2.6.23.1/System.map --no-ksyms --no-lsmod \13 KB (2,083 words) - 16:18, 14 February 2012
- * 012-linux-2.6.23.1-apm9328.diff ...background:#00ff00;" | OK || NA || style="background:#00ff00;" | MMC OK || Linux boot on MMC Ok4 KB (542 words) - 00:09, 3 December 2007
- ** linux/usb_gadget.h est devenu linux/usb/gadget.h -> à changer dans drivers/usb/gadget/imx_udc.c ** l'ISP166x est maintenant intégré dans Linux (non testé). Notre driver ne compile plus.3 KB (347 words) - 11:27, 5 August 2009
- #REDIRECT [[Trash Fr:Développement de pilotes linux]]54 bytes (8 words) - 21:28, 1 August 2010
- An embedded Linux system is very similar (when speaking about software) to a Desktop one, tha * an operating system = the '''Linux kernel'''2 KB (247 words) - 09:31, 22 November 2016
- ...nt CAN bus driver uses SocketCAN API which is now the official CAN API for Linux. SocketCAN is based on the Linux socket. Further details can be found on the links at the bottom of this pag5 KB (783 words) - 11:10, 31 July 2018
- $ make linux-menuconfig826 bytes (114 words) - 18:02, 4 September 2013
- On this page we will explain you how to change the Boot Logo/Screen of Linux. # Linux will automatically convert your .ppm to a .c file, after you have added it4 KB (618 words) - 11:28, 21 June 2018
- This page summarizes all the important things to know when talking about Linux drivers in general. Linux drivers are the piece of code running inside the kernel itself that are ass2 KB (291 words) - 22:42, 11 June 2009
- **ISP176x seems to be integrated in Linux but seems "lighter" than ours (NXP). So we will keep NXP one. ...le="background:#00ff00;" | OK || NT || style="background:#00ff00;" | OK || Linux boot on MMC Ok7 KB (778 words) - 17:34, 18 April 2009
- * Patches to port: ''buildroot/target/device/armadeus/linux/kernel-patches/2.6.29/'' ...linux/kernel-patches/2.6.29/000-foo.patch buildroot/target/device/armadeus/linux/kernel-patches/2.6.38/23 KB (2,772 words) - 15:50, 8 June 2012
- The APF27 Linux distribution can be found here: [https://gitlab.com/armadeus/armadeus-bsp/- Currently (Armadeus-6.0) supported Linux version is: '''2.6.29.6'''.7 KB (723 words) - 13:49, 30 June 2022
- How to use the APF's serial ports on Linux. On Linux, all serial ports are driven the same way. Only their device nodes are chan4 KB (587 words) - 09:58, 26 July 2018
- #REDIRECT [[Trash Fr:Installation de ISE sur Ubuntu Linux]]59 bytes (9 words) - 21:17, 1 August 2010
- #REDIRECT [[Trash Fr:Installation de ISE sur Ubuntu Linux]]59 bytes (9 words) - 21:17, 1 August 2010
- $ make linux-menuconfig784 bytes (107 words) - 18:06, 4 September 2013
- #REDIRECT [[Communicate with your board from a Linux Host (Basics)]]68 bytes (10 words) - 19:24, 25 February 2009
- ...le="background:#00ff00;" | OK || NT || style="background:#00ff00;" | OK || Linux boot on MMC Ok8 KB (885 words) - 08:54, 11 July 2012
- [[Category: Linux]] ...'' and ''setenv''. It can be helpful to read and set these variables from Linux as well, for ex. to remote control some U-Boot processes like software upda5 KB (721 words) - 10:52, 14 September 2018
- Linux video capture interface: v2.00 $ make CC=$ARMADEUS_TOOLCHAIN_PATH/arm-linux-gcc2 KB (324 words) - 18:55, 9 November 2010
- * Patch proposal on linux-media: ** 1rst try ? http://osdir.com/ml/linux-media/2009-08/msg00569.html1 KB (183 words) - 18:32, 20 April 2010
- #REDIRECT [[Trash Fr:Débogage Linux]]38 bytes (6 words) - 21:27, 1 August 2010
- ..._Software_Installation#FPGA_firmware_installation|here]]) or directly from Linux as described herewith. Under Linux:1 KB (207 words) - 08:38, 27 August 2015
- #REDIRECT [[APF9328 and APF27 migration to Linux 2.6.38]]57 bytes (7 words) - 10:00, 7 February 2011
- ==Linux configuration== $ make linux-menuconfig4 KB (517 words) - 10:52, 3 October 2017
- The [[APF51]] Linux distribution can be found here: [http://sourceforge.net/project/showfiles.p Currently (armadeus-5.3) default supported Linux version for [[APF51]] is: '''2.6.38.8'''.7 KB (801 words) - 12:00, 13 January 2014
- == Write a Linux device platform source == Add the driver in your Linux configuration5 KB (791 words) - 15:44, 15 July 2015
- selectprojecttree your_armadeus_directory/target/linux/modules/fpga/POD driver.selectprojecttree your_armadeus_directory/target/linux/modules/fpga/POD11 KB (1,644 words) - 14:30, 7 February 2013
- The APF28 Linux distribution can be found here: [http://sourceforge.net/project/showfiles.p Currently (in armadeus-5.3), supported Linux versions are: '''Freescale's 2.6.35.3''' (version by default) and '''vanill6 KB (633 words) - 13:47, 26 December 2013
-
20 bytes (2 words) - 09:56, 5 September 2012
- The [[APF6]] Linux distribution can be found here: [http://sourceforge.net/project/showfiles.p Currently (armadeus-6.0) default supported Linux version for APF6 is: '''vanilla 3.19'''.8 KB (939 words) - 11:43, 2 August 2018
- ...ked question from people who came from microcontroler/dsp world. But under Linux applications it is not the way to do that, we have to «block» on the inte In this article we will talk about gpio interruptions using the [[GPIOlib]] Linux driver under a C program.516 bytes (72 words) - 09:50, 5 June 2014
- tar -xvf Quartus-web-14.0.0.200-linux.tar USB-BLaster is an USB JTAG adaptor usefull to debug altera FPGA. Under Linux some rights must be added to use it with quartus.4 KB (644 words) - 15:53, 12 November 2019
- This page is a tutorial on how to install Vivado on Debian Linux host computer.2 KB (298 words) - 17:33, 30 June 2021
- The [[APF6]] Linux distribution can be found here: [http://sourceforge.net/project/showfiles.p Currently (armadeus-6.0) default supported Linux version for APF6 is: '''vanilla 3.19'''. Details about this kernel can be f8 KB (929 words) - 11:46, 2 August 2018
- The [[OPOS6UL]] Linux distribution can be found here: [http://sourceforge.net/project/showfiles.p ...in armadeus BSP is: '''vanilla 4.17'''. [[OPOS6UL]] have been mainlined in Linux from 4.11, so any kernel with higher version number should support this boa7 KB (793 words) - 13:04, 9 August 2018
- The [[OPOS6UL]] Linux distribution can be found here: [http://sourceforge.net/project/showfiles.p ...armadeus BSP is: '''vanilla 4.8.10'''. [[OPOS6UL]] have been mainlined in Linux from 4.11, so any kernel with higher version number should support this boa7 KB (755 words) - 18:04, 7 September 2017
- #REDIRECT [[APF6 legacy Linux 3.10 kernel status]]50 bytes (6 words) - 11:46, 2 August 2018
- The [[APF6]] Linux distribution can be found here: [https://gitlab.com/armadeus/armadeus-bsp/- Currently (armadeus-6.0) default supported Linux version for APF6 is: '''vanilla 3.19'''. Details about this kernel can be f8 KB (952 words) - 13:50, 30 June 2022
Page text matches
- ...rootfs to a MMC/SD card in ext2 (or change it in the fstab), also copy the linux kernel to the rootfs /boot folder: $ sudo cp $ARMADEUS_BINARIES/$ARMADEUS_BOARD_NAME-linux.bin /media/mmc/boot3 KB (443 words) - 01:36, 25 July 2013
- Sur Linux (et MAC?), NFS fait partie de votre distribution donc vous ne devriez pas a3 KB (506 words) - 21:14, 1 August 2010
- ...our terminal like on this [[Linux start screenshot | screenshot]] (Default Linux login is "root" with an empty password). '''If your system is NOT starting' # If Linux has successfully started, your system is operational. If you want to add ap3 KB (476 words) - 15:11, 4 June 2019
- Image Name: Linux-2.6.27.13 Image Type: ARM Linux Kernel Image (uncompressed)13 KB (1,753 words) - 20:03, 7 March 2009
- setenv rootpath "/tftpboot/apfXX-root" (to boot Linux over NFS) ==Advanced Linux boot==6 KB (957 words) - 16:30, 13 May 2015
- ...ask you to specify the serial port on which the board is connected. Under Linux please use ''/dev/ttySx'' or ''/dev/ttyUSBx'' and under Window$ use COMx. Enter serial port number or name to use (/dev/ttySx under Linux and COMx under Windows):11 KB (1,731 words) - 16:31, 6 May 2020
- On this page you will find usefull informations to have a working Linux Framebuffer on your board. Linux Framebuffer is the lowest level (standardized) API for userspace programs t4 KB (604 words) - 13:16, 18 January 2023
- filesystem, and so it's possible to directly use some Linux standard functions [[Category:Linux drivers]]7 KB (1,085 words) - 17:41, 12 December 2011
- This boot procedure is usefull to test a modified rootfs and/or a linux kernel keeping safe the original flash memory content of your board. * The copy of the Linux kernel to the NFS ''/boot'' folder, makes possible to also download it with8 KB (1,232 words) - 13:17, 1 February 2022
- {{Note|This page explains how to transfer files on the board when the Linux system has started, '''not from U-Boot !'''. == Linux ==3 KB (469 words) - 18:31, 1 February 2022
- * load ''g_file_storage'' or ''g_mass_storage'' module (depending on your Linux version): On your Linux Host:7 KB (1,087 words) - 21:23, 31 March 2020
- All needed drivers are included in the standard Armadeus Linux image. You should see something like that on the Linux console:6 KB (993 words) - 14:54, 7 July 2020
- [[Category:Linux drivers]]894 bytes (143 words) - 23:56, 27 October 2009
- ==Linux== * [[Linux Debug |Tips to debug under Linux]]3 KB (383 words) - 15:12, 1 April 2020
- ===Linux configuration=== To use a touchscreen, there are some drivers to install in Linux.19 KB (2,628 words) - 16:58, 3 November 2016
- Tips to do debugging under Linux. On this page, you will find usefull informations for debugging your Linux kernel/drivers.5 KB (743 words) - 10:31, 3 May 2019
- Use [[Linux driver for FPGA controlled keyboards| this Linux driver]] to control this IP.2 KB (348 words) - 21:33, 1 August 2010
- {{Note|For instructions on how to use MMC/SD on Linux, see the [[MultiMediaCard]] page. (Here you will only find hardware details * [[MultiMediaCard|How to use MMC/SD/microSD on Linux]]7 KB (813 words) - 10:36, 22 July 2012
- Pour savoir comment utiliser la MMC/SD sous Linux, consultez la page [[MultiMediaCard]].1 KB (192 words) - 21:32, 1 August 2010
- Generally on Linux you would need a kernel part (=driver) and a user space part (=library) to Use Linux Armadeus [[GPIO_Driver|GPIO driver with it's PPDEV emulation]]3 KB (390 words) - 16:43, 13 July 2015
- ...for our own pleasure and also to help universities and enthusiasts develop Linux embedded systems. <br> ...eus BSP release and so default LCD is Sharp LQ043. You have to change your Linux configuration to support your LCD. Please follow instructions on [[FrameBuf3 KB (538 words) - 12:34, 30 June 2022
- * Linux should be compiled with USB Host driver as static ('''done by default in cu $ make linux-menuconfig1 KB (194 words) - 18:49, 6 August 2018
- ...ion environments from bare-metal to platform operating systems such as ARM Linux. * At that time there are 2 ABIs used for ARM Linux:2 KB (232 words) - 16:42, 1 April 2008
- During a second buildroot compiling, the compiler does not use the right Linux ''utils-linux'' and then compile again. ...... this will not work ).953 bytes (144 words) - 12:36, 30 June 2022
- ...oftware Development Kit''" (SDK) aka "''Board Support Package''" (BSP) for Linux/Window$ Hosts. ...bc.org/ Buildroot]: set of Makefiles that allow to entirely build embedded Linux systems3 KB (417 words) - 19:34, 14 November 2017
- <big>How-To install Armadeus Software Development Kit (SDK) on Linux systems. This SDK is currently based on the (excellent) [http://buildroot.n ...1.20 or later to compile the Linux Kernel - Please update or upgrade your Linux distribution.12 KB (1,782 words) - 16:12, 30 January 2024
- *Now you have a complete Linux OS. Linux can be started by double clicking on the .vmx file.5 KB (740 words) - 12:39, 30 June 2022
- ...update (from U-Boot) the Flash's partitions of your APF module storing the Linux, rootfs and U-Boot software images. BIOS> setenv rootpath "/tftpboot/apf9328-root" (to boot Linux over NFS)19 KB (2,783 words) - 09:46, 9 September 2021
- In order to send your image files (U-Boot, Linux, rootfs or FPGA's firmware) at higher speed (than serial port) to your Arma ...ed directory (''/tftpboot'' by default) will be accessible from the U-Boot/Linux TFTP clients.5 KB (752 words) - 12:17, 15 April 2021
- In order to send your files (U-Boot, Linux, rootfs ...) with higher speed to the armadeus board, you can use a TFTP se1 KB (222 words) - 15:08, 17 November 2009
- You will need a RS232 terminal emulator to communicate with U-Boot/Linux console. You can choose between: In order to send your image files (U-Boot, Linux, rootfs or FPGA's firmware) at higher speed to your Armadeus board, you can4 KB (546 words) - 09:58, 8 October 2015
- Mplayer is using the [[FrameBuffer|Linux Framebuffer]] to display the videos.<br> * [http://www.linuxjournal.com/video/linux-howto-video-editing-magic-ffmpeg Nice (video) tutorial to edit videos with2 KB (321 words) - 09:22, 20 May 2015
- ...particuliers et les universitaires à développer des systèmes embarqués Linux. L'association est à but non lucratif et fonctionne essentiellement grâce * Linux 2.6 pour le système d'exploitation8 KB (1,233 words) - 12:40, 30 June 2022
- ...s seront affichés dans votre terminal série, un exemple est donné ici [[Linux start screenshot]] <br> *6. Si Linux a démarré correctement, vous pouvez procéder à l'installation de l'envi2 KB (333 words) - 18:59, 27 January 2009
- ...pherals On Demand]], developped by ARMadeus, that simplify FGPA-device and Linux driver integration. ...[[How_to_make_a_VHDL_design_in_Ubuntu/Debian| ISE WebPack installation on Linux]] page for more infos.6 KB (977 words) - 18:56, 12 October 2012
- [[Installation de ISE sur Ubuntu Linux]] ===Configurer le FPGA depuis Linux===4 KB (722 words) - 20:55, 1 August 2010
- * The debugger path is '''buildroot/output/host/usr/bin/arm-linux-gnueabihf-gdb''' * The compiler path is '''buildroot/output/host/usr/bin/arm-linux-gnueabihf-g++'''2 KB (387 words) - 17:13, 3 November 2016
- ...t bien va builder le package.... la folie... y a aussi dans "target/linux/linux-2.4/Makefile" la config kernel qui est incluse pour savoir quels modules so ...servent à générer les rep et fichiers dans "build_arm.../linux-24-brcm/linux-modules/ipkg". Dans ce rep sont mis les rep CONTROL et les modules dans li5 KB (946 words) - 19:12, 9 August 2007
- On this page, you will find all the informations needed to use the Linux FPGA loader driver. ...f your APF board from Linux userspace/shell (ie FPGA reprogrammation after Linux boot).1 KB (230 words) - 08:41, 27 August 2015
- ...e used to do read or write accesses (16 or 32 bits wide) to the FPGA, from Linux userspace/console. The O_SYNC option is recommended to avoid Linux to cache the content of /dev/mem and delay any modification done in this fi4 KB (567 words) - 10:59, 27 February 2017
- ...icroprocesseur/contrôleur. Avec un sous-répertoire pour chaque système (linux, ulinux, ecos, avr, ...) '''''Ce répertoire est optionnel et ne s'applique * un répertoire '''HAL''' avec les fichiers d'un drivers de base (pour Linux ou ''générique'' ?!?)27 KB (4,288 words) - 10:33, 8 October 2008
- This page summarizes all you need to know before starting to develop Linux drivers for your Armadeus board * Linux Device Drivers (3rd edition) book: http://lwn.net/Kernel/LDD3/2 KB (276 words) - 17:55, 4 September 2013
- ...eurs-analyse-de-logs-2 Mars 2007 edition of the French Magazine: GLMF (GNU/Linux Magazine France)].<br>2 KB (271 words) - 00:56, 14 January 2012
- * [http://www.gnurou.org/writing/linuxmag/sdl Tutoriel paru dans Linux Magazine France, entre les numéros 65 et 73.] [[Image:FrenchFlag.png]]3 KB (441 words) - 20:35, 14 February 2012
- <architecture name="linux"> Dans cet exemple, les fichiers seront inclus dans le répertoire ''drivers/linux/'' du zip. L'outil générera un header pour les registres avec le nom du c11 KB (1,747 words) - 17:47, 28 March 2008
- ...(ie sampling slow or fast signals) there are 2 ways to use the ''max1027'' Linux driver: ...a [http://lxr.linux.no/source/Documentation/hwmon/sysfs-interface?v=2.6.18 Linux Hardware Monitoring API (hwmon)] compatible/standardized interface: ''/sys/10 KB (1,519 words) - 18:03, 18 February 2011
- $ arm-linux-gcc -g -o hello hello.c []$ arm-linux-gdb program3 KB (554 words) - 12:40, 3 June 2016
- == Linux driver installation == ...rces (''arch/arm/mach-mx5/apf51dev-baseboard.c''), rebuild and reflash the Linux kernel.}}5 KB (883 words) - 13:30, 10 February 2022
- ...them in a FIFO. At that time it will generate an interrupt to signal i.MXL Linux driver that data are available. We will use LIRC framework. A custom Linux driver will have to be written.4 KB (499 words) - 20:02, 29 October 2008
- First be sure to have the Watchdog Linux driver activated: $ make linux-menuconfig2 KB (343 words) - 13:52, 26 January 2018
- ...s been tested on [[APF9328Dev]]/[[APF27Dev]] but any I2C RTC, supported by Linux, should work the same way. ...efault included in standard Armadeus Linux kernel. To check if your board (Linux) has correctly detected the RTC:6 KB (895 words) - 15:47, 19 September 2016
- Introduisez votre SD/MMC dans le lecteur de carte sur votre PC Linux. Il faut ensuite récupérer le nom du device assigné à la MMC (général Partition 1 has different physical/logical beginnings (non-Linux?):8 KB (1,048 words) - 21:32, 1 August 2010
- ...pour le développent et la synthèse FPGA ISE WebPack pour le système GNU/Linux]. ...m sur cette page]. Choisir ''Download ISE WebPACK software for Windows and Linux''2 KB (383 words) - 21:17, 1 August 2010
- ...mount'' command into your buildroot configuration. Additionally the ''util-linux'' package is necessary: you must enable it into your buildroot configurati ...and therefore you can mount them by using the smbmount command on your '''Linux''' PC as before:4 KB (565 words) - 11:57, 24 July 2018
- ==Linux driver==595 bytes (94 words) - 14:57, 15 August 2010
- * [[kernel-upstream-status|APF boards Linux "upstreaming" status]]1 KB (118 words) - 10:56, 9 February 2015
- ==Linux kernel bogomips calculation== armadeus Linux 2.6.18. armv5tejl-linux-gnu 192 64 32 1.0000 16 KB (610 words) - 19:43, 16 March 2008
- ==Linux drivers== * [[FrameBuffer | How to activate/use Linux FrameBuffer driver]]3 KB (477 words) - 15:21, 1 July 2015
- ...iler is installed in ''buildroot/output/host/usr/bin/'' and is named ''arm-linux-gcc''. You can access it with the ''$ARMADEUS_TOOLCHAIN_PATH'' environment ...TOOLCHAIN_PATH'' to your ''PATH'' environment variable and then call ''arm-linux-gcc'' instead of ''gcc''4 KB (566 words) - 21:14, 22 September 2015
- *Sascha Hauer (Pengutronix) - initial 2.6 Linux i.MX support. ** http://pasiphae.extern.pengutronix.de/?p=imx/linux-2.6.git;a=summary912 bytes (139 words) - 21:17, 1 August 2010
- ! '''Name / IRC Nickname''' || '''Linux Apps'''|| '''Linux Drivers'''|| '''FPGA''' || '''Board Design''' || '''Projet/Domain''' ...tien Philippe]] || 1 || 2 || 1 || 2 || electronics, board design, embedded linux9 KB (763 words) - 12:53, 20 December 2013
- ...s compiler is installed in ''$ARMADEUS_TOOLCHAIN_PATH'' and is named ''arm-linux-g++'' ...TOOLCHAIN_PATH'' to your ''PATH'' environment variable and then call ''arm-linux-g++'' instead of ''g++'':3 KB (485 words) - 20:57, 1 August 2010
- * [http://free-electrons.com Some nice presentations on Linux Embedded]448 bytes (65 words) - 17:43, 2 March 2009
- * [http://www.linuxha.com/ Linux Home Automation website]450 bytes (50 words) - 17:09, 29 December 2016
- =Linux Driver=2 KB (257 words) - 14:15, 15 August 2010
- This page will explain you how to configure and use the Linux driver controlling the BackLight of your LCD * There is a small test script (shell) in ''target/linux/modules/backlight/test/''2 KB (337 words) - 00:17, 19 July 2017
- | | |-- linux |-- linux6 KB (868 words) - 17:59, 4 September 2013
- * Console oriented client in C programming language for Linux, windows ... * Chat server is done, run under armadeus card, windows, linux ...885 bytes (117 words) - 19:06, 11 April 2016
- * i.MXL/DevLight SPI Chip Select signals are not used by Linux SPI infrastructure; it needs multiple chip select (one for each chip connec * [[TSC2102 Linux driver| TSC2102 Linux driver details ]]2 KB (363 words) - 21:23, 1 August 2010
- This page details the installation and the usage of the Linux drivers for the [[TSC2102|TSC210x chips]] (touch & temp/voltage control). S ...2_Linux_driver|Here]] you will find instructions to know how we configured Linux to activate these drivers (may be useful if you want to deactivate them).3 KB (368 words) - 02:45, 10 August 2011
- ...[APF28]](internal) / [[APF6Dev]](SX8654) driver is statically built inside Linux kernel and should auto detect the touchscreen controller.}} ...ther input devices (like mouse or keyboard) and they have been detected by Linux before your touchscreen device, then you will probably need to adapt TSLIB_3 KB (422 words) - 11:16, 2 August 2019
- ==Linux.org server down related problems== ===linux-2.6.38.8.tar.bz2 unavailable===2 KB (234 words) - 10:41, 23 January 2012
- ==Xilinx WebPack installation instructions for Linux Ubuntu (6.10) with ISE 10.1.==4 KB (686 words) - 11:57, 20 January 2022
- Linux laptop-jeremie-ubuntu 2.6.31-20-generic-pae #58-Ubuntu SMP Fri Mar 12 06:258 KB (1,175 words) - 11:31, 2 April 2014
- ==Linux configuration== If you need to deactivate it, take a look at the linux menuconfig:8 KB (1,322 words) - 08:55, 26 July 2018
- * Needs to connect APF to a RS485 bus : Linux driver development? UART driver ?4 KB (636 words) - 09:48, 28 August 2009
- * [[CAN_bus_Linux_driver | How to use CAN bus on Linux with Armadeus boards]] * [http://home.wanadoo.nl/arnaud/ Old Linux CAN-bus driver project superseded by LinCAN]2 KB (238 words) - 11:04, 18 April 2011
- * [[DAC|Comment utiliser ce CNA sous Linux]]848 bytes (133 words) - 20:59, 1 August 2010
- Pour le noyau Linux, le Max1027 est considéré comme un composant de surveillance système. # make linux-menuconfig2 KB (344 words) - 21:05, 1 August 2010
- ...SPI de l'i.MXL/DevLight ne sont pas utilisées par l'infrastructure SPI de Linux: cela nécessite la sélection de multiple puce (une pour chaque puce conne * [[TSC2102 Linux driver| details du driver Linux TSC2102 ]]2 KB (282 words) - 21:24, 1 August 2010
- | | |-- linux |-- linux1 KB (163 words) - 21:19, 1 August 2010
- Comment installer le kit de développement du projet Armadeus pour Linux/Window$ * system -> util-linux4 KB (692 words) - 12:42, 30 June 2022
- $ arm-linux-gdb program * [http://www.linux-france.org/article/memo/node119.html Déboguage avec gdb]2 KB (243 words) - 21:16, 1 August 2010
- On Linux systems, when it's a matter of programming periodic tasks, the utility of c3 KB (368 words) - 10:21, 8 July 2013
- ...ans ''armadeus/buildroot/build_arm/staging_dir/bin/'' et est appelé ''arm-linux-g++'' ...'' à votre variable d'environnement ''PATH'' et en appelant ensuite ''arm-linux-g++'' au lien de ''g++''3 KB (474 words) - 20:56, 1 August 2010
- Conseils pour déboguer sous Linux ...page, vous trouverez des informations utiles au débogage d'Armadeus sous Linux3 KB (474 words) - 15:46, 4 April 2012
- ...t vous avez besoin de savoir avant de commencer à développer les pilotes Linux pour votre carte Armadeus. * Le livre Linux Device Drivers (3rd edition): http://lwn.net/Kernel/LDD3/2 KB (287 words) - 21:28, 1 August 2010
- Sascha Hauer (Pengutronix) - support initial sur Linux 2.6.<br> * http://rtime.felk.cvut.cz/darcs/darcsweb.cgi?r=ppisa-linux-devel;a=summary881 bytes (142 words) - 21:18, 1 August 2010
- * Vous utilisez une nouvelle version du compilateur arm-linux-g++ mkdir $APPLICATION_ROOT_DIR/mkspecs/linux-arm-g++6 KB (832 words) - 21:34, 1 August 2010
- * [http://www.gnurou.org/writing/linuxmag/sdl Tutoriel paru dans Linux Magazine France, entre les numéros 65 et 73.]1 KB (198 words) - 21:14, 1 August 2010
- ...nde ''smbmount''dans la configuration de votre Buildroot. Le paquet ''util-linux'' est lui aussi nécessaire. ...c vous pouvez les monter en utilisant la commande smbmount sur votre PC '''Linux''' comme avant:4 KB (613 words) - 21:23, 1 August 2010
- Bien que applicables à toute plateforme Linux embarqué supportant un noyau récent et Buildroot, mes essais ont été co ...depuis Linux. Comme le TSC regroupe plusieurs fonctionnalités les pilotes Linux nécessaires à son utilisation seront divisés en plusieurs couches/classe7 KB (1,281 words) - 23:07, 2 March 2008
- * [[ISP1761 Linux driver | How to use this chip on Linux (if you have it on your board)]] * [http://www.nxp.com/acrobat/applicationnotes/AN10042_2.pdf NXP Linux application note for this chip]758 bytes (116 words) - 14:56, 17 July 2009
- ...ux operating system. Everyone wanting to write portable & state of the art Linux applications dealing with sound should consider using ALSA.<br> ALSA is composed of a low level part (target specific Linux drivers) and a userspace library (''libasound'') with a lot of tools (''apl11 KB (1,653 words) - 18:09, 30 July 2018
- $ make linux-menuconfig ...This will autoselect and activate corresponding serial port. Reflash your Linux kernel.6 KB (924 words) - 14:50, 29 March 2017
- Instead of using a Linux driver, a simple userspace tool (''ch7024'') has been written to configure2 KB (376 words) - 14:38, 2 May 2011
- ...rmations to use the [[ISP1761|DevFull's ISP1761 USB Host controller]] with Linux. With recent version of Armadeus (svn version 978 or higher ) ISP1761 drive $ make linux-menuconfig3 KB (476 words) - 15:20, 17 July 2009
- ...unction names, we have to look in the System.map file which stores all the Linux kernel function offset. ...-V buildroot/build_armv4t/linux-2.6.23.1/vmlinux -m buildroot/build_armv4t/linux-2.6.23.1/System.map --no-ksyms --no-lsmod \13 KB (2,083 words) - 16:18, 14 February 2012
- * 012-linux-2.6.23.1-apm9328.diff ...background:#00ff00;" | OK || NA || style="background:#00ff00;" | MMC OK || Linux boot on MMC Ok4 KB (542 words) - 00:09, 3 December 2007
- ...U, we are just using an other board hardware emulation (ARM Versatile) and Linux kernel to launch our rootfs and test our software which is not hardware rel {{Note|If you are using a modern linux distribution like Ubuntu, also be sure NetworkManager is disabled/not confi8 KB (1,266 words) - 13:14, 13 January 2023
- * est multi-platerforme (Unix/Linux, MacOS, Windows, BSD, etc.);3 KB (549 words) - 12:36, 22 February 2008
- How-To use the USB Host functionnality of Armadeus boards under Linux. ...lder versions refer to the [[ISP1761_Linux_driver |how to install USB Host Linux driver for the DevFull]] page5 KB (749 words) - 12:04, 23 April 2015
- ** linux/usb_gadget.h est devenu linux/usb/gadget.h -> à changer dans drivers/usb/gadget/imx_udc.c ** l'ISP166x est maintenant intégré dans Linux (non testé). Notre driver ne compile plus.3 KB (347 words) - 11:27, 5 August 2009
- ===Linux configuration=== $ make linux-menuconfig5 KB (693 words) - 09:35, 1 July 2016
- ..., Xilinx tools are mandatory), fortunately Xilinx provides his webpack for Linux. [[ISE_WebPack_installation_on_Linux| Click here if you didn't install it y .../panteltje.com/panteltje/fpga/index.html Using Xilinx Webpack-8.1i on grml Linux in scripted mode, without GUI] for an introduction.7 KB (953 words) - 12:44, 30 June 2022
- ...ry in directory buildroot/target/device/armadeus/linux/kernel-patches/ for Linux kernel and in patches/buildroot for buildroot. Then answer questions (defaults are recommended). For linux kernel, quiltify will rename your source directory and download/patch/compi3 KB (464 words) - 13:44, 30 June 2022
- * Configure the FPGA [[FPGA_loader | from Linux]], [[Target_Software_Installation#FPGA_firmware_test | from U-Boot]], [[PCI * Flashing FPGA firmware [[Uboot_FPGA_firmware_update_from_Linux | from Linux]], [[Target_Software_Installation#FPGA_firmware_installation | from U-Boot]4 KB (515 words) - 15:45, 12 November 2019
- ~/armadeus/buildroot/build_arm/staging_dir/usr/bin/arm-linux-gcc2 KB (371 words) - 17:08, 28 November 2008
- '''i.MX''' processor. A Linux driver on '''i.MX''' will read ''irq_mngr'' and acknowledge irq by writing '1' on the corresponding register. And finally, Linux driver will10 KB (1,574 words) - 12:43, 30 June 2022
- ...e LCD (too low), so you need to tweek CCM register a little before booting Linux: * [[FrameBuffer | Linux framebuffer configuration]]4 KB (600 words) - 17:50, 13 March 2017
- * [[APF27 Linux kernel status]]9 KB (1,132 words) - 09:39, 12 February 2015
- Adeos is provided as a linux kernel patch. Thus, you have to carefully select a patch matching the kerne Target options > Armadeus Device Support > Linux > Linux kernel version4 KB (502 words) - 12:33, 13 February 2012
- $ make linux-menuconfig * Then rebuild the Linux and rootfs images:3 KB (397 words) - 20:13, 12 February 2013
- * [http://www.arm.linux.org.uk/ Linux on all arm machines]3 KB (520 words) - 17:23, 1 September 2009
- $ make linux-menuconfig937 bytes (134 words) - 23:07, 4 December 2009
- $ ddd --debugger ./buildroot/build_arm/staging_dir/bin/arm-linux-gdb800 bytes (111 words) - 22:11, 27 October 2009
- ...Eclipse download page] and select '''Eclipse IDE for C/C++ Developers''' (Linux version) or '''Eclipse IDE for Java Developers''' (if you intend to do Andr $ tar -xvzf Desktop/eclipse-cpp-europa-winter-linux-gtk.tar.gz5 KB (776 words) - 18:29, 12 July 2017
- Xenomai is a real time co-kernel which cooperates with Linux via Adeos. With its help, hard real time applications can be developed and ...be easily moved between the Real Time Xenomai environment and the regular Linux system.<br>9 KB (1,249 words) - 13:41, 30 April 2014
- ...ur board through the RS232 line. With it you can have access to the U-Boot/Linux console of your APF without needing to connect a keyboard/screen to the boa3 KB (408 words) - 15:43, 16 April 2018
- FBGrab is a framebuffer screenshot program, capturing the Linux framebuffer and converting it to a png-picture. Written by Gunnar Monell <gmo@linux.nu>. Basically a rewrite of fbshot by Stephan Beyer <fbshot@s-beyer.de>4 KB (609 words) - 22:24, 6 June 2008
- An embedded Linux system is very similar (when speaking about software) to a Desktop one, tha * an operating system = the '''Linux kernel'''2 KB (247 words) - 09:31, 22 November 2016
- ...nt CAN bus driver uses SocketCAN API which is now the official CAN API for Linux. SocketCAN is based on the Linux socket. Further details can be found on the links at the bottom of this pag5 KB (783 words) - 11:10, 31 July 2018
- * [[OpenCore 16550 IP Linux driver | Load OpenCore serial IPs into the FPGA of your board and use it]] ...l the serial ports are used the same way on Linux: [[Serial ports usage on Linux|go here to have more informations]].868 bytes (137 words) - 18:18, 14 December 2009
- $ make linux-menuconfig826 bytes (114 words) - 18:02, 4 September 2013
- On this page we will explain you how to change the Boot Logo/Screen of Linux. # Linux will automatically convert your .ppm to a .c file, after you have added it4 KB (618 words) - 11:28, 21 June 2018
- * A Linux Kernel Driver which manages the FPGA Firmware, the ADC multiplexers and the * A Linux Kernel Driver which manages the FPGA Firmware.32 KB (4,480 words) - 16:01, 4 April 2015
- ...t (Window$ or Mac), we recommend you to setup a Virtual machine, install a Linux distribution on it and come back later here}}663 bytes (111 words) - 17:19, 22 October 2009
- = Compile UNISIM and SIMPRIM with GHDL (on linux) =3 KB (395 words) - 09:37, 12 February 2015
- This page summarizes all the important things to know when talking about Linux drivers in general. Linux drivers are the piece of code running inside the kernel itself that are ass2 KB (291 words) - 22:42, 11 June 2009
- --build=i586-linux \ --host=arm-linux \3 KB (410 words) - 14:32, 12 December 2008
- **ISP176x seems to be integrated in Linux but seems "lighter" than ours (NXP). So we will keep NXP one. ...le="background:#00ff00;" | OK || NT || style="background:#00ff00;" | OK || Linux boot on MMC Ok7 KB (778 words) - 17:34, 18 April 2009
- * Use integrated Linux and U-Boot makefile20 KB (1,938 words) - 23:10, 26 April 2009
- * add scripts to download and flash binaries update (u-boot, linux and rootfs)6 KB (532 words) - 20:19, 21 March 2009
- ...success. success condition is compilation pass and binary images (u-boot, linux, and rootfs) are available in binaries directory. ...ernet to run test cases and log test results. First priroty is to validate linux kernel, modules and rootfs packages present in the default configuration fo5 KB (660 words) - 20:51, 1 October 2013
- *New versions of U-Boot (1.3.4), Linux kernel (2.6.27), GCC (4.2.1), Busybox (1.12.1) and also a recent version of : <board>-linux.bin20 KB (2,829 words) - 14:12, 30 June 2022
- Linux armadeus 2.6.27.2 #1 PREEMPT Thu Dec 4 14:09:27 CET 2008 armv4tl unknown3 KB (435 words) - 16:43, 2 November 2011
- Drivers are included in Linux kernel > 2.6.29, but firmware must be downloaded from serialmonkey website ..., Wireless network must be configured by selecting these options in ''make linux-menuconfig'':13 KB (1,670 words) - 19:05, 26 February 2018
- ...UL]] or a [[USB_to_WiFi_adapter|USB to Wi-Fi adapter]], with corresponding Linux drivers loaded.}}7 KB (911 words) - 15:24, 30 January 2024
- $ make linux-menuconfig $ make linux && make3 KB (462 words) - 11:24, 30 April 2014
- ...r-concevoir-des-circuits-logiques-complexes An article in GLMF 149 (french Linux Magazine)]3 KB (470 words) - 10:00, 11 April 2016
- * POD is multi-platform (Windows, Linux, macOS, ...). * POD is able to generate drivers for the targeted operating system (actually Linux).8 KB (1,239 words) - 10:44, 20 March 2009
- | `-- linux/3 KB (415 words) - 11:39, 11 June 2009
- ...plete system like a distribution, not only the kernel. We can have several linux drivers but in different OS-distribution. For embedded operating systems we For example, to generate a Linux UART driver with 2 UART instances, named UART1 and5 KB (645 words) - 14:40, 7 February 2013
- Althought dedicated to Linux on ARM9, it should applies to every "well coded" OSes. Linux integrates this mechanism and provides an API to handle multiple7 KB (858 words) - 15:53, 27 January 2011
- POD:i2cledbutton_tutorial.driver> selectprojecttree ~/armadeus/target/linux/modules/fpga/POD $ make linux-menuconfig18 KB (2,655 words) - 17:11, 26 August 2013
- :: Linux kernel and programs provided by the recent Buildroot are not mandatory. [*] Linux Kernel5 KB (802 words) - 18:57, 21 February 2012
- /armadeus/buildroot/project_build_armv5te/apf27/linux-2.6.29.6/arch/arm/mach-mx2 4- on se rend sur http://archlinuxarm.org/ pour télécharger une image de linux compilée pour armv5 donc compatible avec l'apf272 KB (403 words) - 10:13, 9 August 2011
- * i.MX27 SPI Chip Select signals are not used by Linux SPI infrastructure; it needs multiple chip select (one for each chip connec * [[TSC2102 Linux driver| TSC2102 Linux driver details ]]2 KB (264 words) - 11:30, 4 January 2010
- * Patches to port: ''buildroot/target/device/armadeus/linux/kernel-patches/2.6.29/'' ...linux/kernel-patches/2.6.29/000-foo.patch buildroot/target/device/armadeus/linux/kernel-patches/2.6.38/23 KB (2,772 words) - 15:50, 8 June 2012
- * On your Host select ALSA compilation in Linux configuration: $ make linux-menuconfig2 KB (290 words) - 18:06, 4 September 2013
- $ make linux-menuconfig .../gnu-linux-magazine-hs/debogage-du-noyau-linux-avec-kgdb Article KGDB dans Linux Mag] [[Image:FrenchFlag.png]]987 bytes (109 words) - 12:56, 8 December 2011
- $ make linux-menuconfig $ make linux && make2 KB (253 words) - 18:06, 4 September 2013
- This page summarizes the Linux kernel versions used for each APF boards. The '''current version''' is the ...page : Kernel-upstream-status]] resume the compatibility of the uptstream linux kernel with each APF*.1 KB (194 words) - 18:43, 21 November 2017
- The APF27 Linux distribution can be found here: [https://gitlab.com/armadeus/armadeus-bsp/- Currently (Armadeus-6.0) supported Linux version is: '''2.6.29.6'''.7 KB (723 words) - 13:49, 30 June 2022
- How to use the APF's serial ports on Linux. On Linux, all serial ports are driven the same way. Only their device nodes are chan4 KB (587 words) - 09:58, 26 July 2018
- #REDIRECT [[Trash Fr:Installation de ISE sur Ubuntu Linux]]59 bytes (9 words) - 21:17, 1 August 2010
- * You are using a new arm-linux-g++ compiler version3 KB (468 words) - 16:20, 22 September 2011
- $ make linux-menuconfig784 bytes (107 words) - 18:06, 4 September 2013
- Create a hello folder in <armadeus_directory>/target/linux/modules/. On the host computer type : cd <armadeus_directory>/target/linux/modules/4 KB (526 words) - 20:57, 30 March 2009
- BIOS> tftp ${fileaddr} apf9328-linux.bin Filename 'apf9328-linux.bin'.1 KB (186 words) - 16:46, 4 May 2011
- * [[APF27 Linux kernel status]]2 KB (246 words) - 14:53, 19 March 2021
- == Check your MAC address in Linux == ...hich uses the DM9000 driver, reads the MAC address from the EEPROM. During Linux boot, the driver prints the MAC address.4 KB (666 words) - 15:44, 14 January 2011
- * Preparation of the Armadeus Linux kernel to support Xenomai Xenomai is a co-kernel cooperating with Linux. This suite is made of two parts :8 KB (1,135 words) - 18:07, 4 September 2013
- ...tftp from Linux, with [[kermit | serial from U-Boot]] or with [[nfs]] from Linux. Here the file is downloaded with tftp in U-Boot: FPGA configuration can also be done in [[FPGA_loader | Linux]].4 KB (678 words) - 15:24, 25 November 2021
- This source looks very like a classical Linux application with threads and nanosleep() function.<br> CC:=$(ARMADEUS_TOOLCHAIN_PATH)/arm-linux-gcc5 KB (820 words) - 16:47, 15 February 2010
- Xenomai is a Linux kernel real time extension. For explanations on how to install it, take a l For each example, a "functionnal equivalent" version is available for Linux environnement, in order to make some comparison.<br>2 KB (238 words) - 11:13, 15 February 2010
- ...9/04/25/big-endian-for-imx27-found-the-problem/ this example here], during Linux kernel portage or for FPGA debugging with ChipScope. ...oot; serial connection should be enough (see [[Bootstrap]]). For debugging Linux applications directly on the APF you also can do without JTAG, see [[GDB]]}26 KB (3,781 words) - 18:23, 3 June 2016
- ...rect that you have to modify the following files: ''buildroot/output/build/linux-2.6.38.8/arch/arm/mach-mx5/apf51dev-baseboard.c'' and change line 205: * then recompile Linux image and reflash it on your board:2 KB (335 words) - 09:52, 31 March 2015
- * CSI interface can be driven through the V4L2 (Video For Linux) standard interface as soon as CSI/MIPI driver is loaded: * [http://linux.bytesex.org/v4l2/ Video4Linux]2 KB (368 words) - 16:54, 1 April 2016
- # U-Boot initializes the processor, vital peripherals and then load Linux image from Flash, # U-Boot starts Linux image by passing it some parameters, the ''bootargs'',3 KB (437 words) - 20:16, 17 April 2013
- ...le="background:#00ff00;" | OK || NT || style="background:#00ff00;" | OK || Linux boot on MMC Ok8 KB (885 words) - 08:54, 11 July 2012
- Linux video capture interface: v2.004 KB (607 words) - 15:59, 21 January 2014
- ** [[IIO_kernel_driver_model|detail IIO Linux drivers class]] ** [[UIO_kernel_driver_model|detail UIO Linux drivers class]]34 KB (4,583 words) - 15:35, 17 March 2015
- T5 runtime - Linux Multithreaded - Embedded HMI - Jun 23 20114 KB (652 words) - 16:55, 11 January 2017
- ...r board through the Serial line. With it you can have access to the U-Boot/Linux console of your APF without needing to connect a keyboard/screen to the boa1 KB (147 words) - 10:01, 28 September 2015
- You are now at the Linux prompt asking you to enter a username/login to connect. Enter "root" (no pa You are now logged in the Linux Console and can now control your board as you would do it in a Terminal on929 bytes (123 words) - 11:35, 16 May 2009
- $ sudo cp $ARMADEUS_BINARIES/$ARMADEUS_BOARD_NAME-linux.bin /media/disk/boot2 KB (355 words) - 16:11, 9 March 2013
- export ANDROID_SDK=~/android-sdk-linux * Since android-sdk-1.5_r3 branch, the Linux kernel isn't included with the Android source anymore. We can download it i23 KB (3,286 words) - 15:28, 3 November 2011
- For VPU usage on recent Linux kernels, instructions are being built [[Talk:Using_the_i.MX27_video_codec|h * [http://www.bitshrine.org/ Freescale's LTIB (Linux Target Image Builder)]3 KB (476 words) - 15:40, 23 January 2014
- * Linux BSP : Linux distribution used in kit is the ARMadeus sourceforge tree. Some specific mo2 KB (346 words) - 09:42, 12 February 2015
- ==Linux configuration== * Linux will have to be configured in order to tell it that an APW is connected to1 KB (192 words) - 18:07, 4 September 2013
- The Linux drivers are available since 2.6.24 kernel, thanks to the community effort t [*] linux-firmware --->3 KB (377 words) - 14:08, 21 January 2014
- Bluetooth Linux stack is divided into several parts: $ make linux-menuconfig19 KB (2,734 words) - 10:34, 7 December 2020
- ==Linux configuration (APF27Dev only)== * Linux will have to be configured in order to tell that an APW is connected to you15 KB (2,358 words) - 15:23, 17 August 2023
- = Linux testing program = ...ug/imx-fpga-test;h=c9582b3e2b47cff36cbc2aeab610f6c79f0919b3;hb=HEAD target/linux/debug/imx-fpga-test.]13 KB (1,818 words) - 12:47, 10 December 2019
- ...big overhead when parsing, reading and writing large devices, [http://www.linux-mtd.infradead.org/doc/ubifs.html#L_scalability see UBIFS scalability]. [http://www.linux-mtd.infradead.org/doc/ubifs.html UBIFS website]4 KB (621 words) - 11:43, 10 January 2019
- * [[OPOS6UL_NANO Linux kernel status]] * [[Wifi|Wi-Fi usage on Linux]]2 KB (303 words) - 12:00, 23 July 2018
- $ make linux-menuconfig Update the [[APF27]] board with the new Linux kernel and rootfs.1 KB (204 words) - 18:08, 4 September 2013
- $ make linux-menuconfig Update the [[APF27]] board with the new Linux kernel and rootfs.1 KB (177 words) - 18:09, 4 September 2013
- $ make linux-menuconfig * Reflash your Linux kernel1,013 bytes (137 words) - 18:09, 4 September 2013
- * If ''doxygen'' isn't installed on your Linux distribution, you have to install the correct package (here on *Ubuntu): ...functions are used to access devices on i²c bus that doesn't have/need a Linux driver. If you want to access an i²c device, please find out if a driver i14 KB (2,115 words) - 18:35, 1 August 2018
- ...webcam of LDLC). The source of this driver is now included in the current Linux kernel (starting 2.6.27). ...find the module to install. For GSPCA based wecam, a list is given in the Linux kernel documentation and can be found here :3 KB (393 words) - 18:10, 4 September 2013
- * Save your changes, update the rootfs partition (U-Boot 201x.xx) and boot Linux: ==Linux==9 KB (1,208 words) - 10:58, 26 February 2015
- $ ./buildroot/output/host/usr/bin/arm-linux-gcc -mfpu=neon -mcpu=cortex-a9 neon.c (APF6) $ ./buildroot/output/host/usr/bin/arm-linux-gcc -mfpu=neon -mcpu=cortex-a8 neon.c (APF51)3 KB (468 words) - 18:42, 1 June 2018
- ...PWC driver]. The source of this driver is included in the current Armadeus Linux kernel. * PWC driver is not selected by default in the Armadeus Linux kernel, you will need to use the following commands to install it:3 KB (394 words) - 18:10, 4 September 2013
- ...I devices that can be configured in master (slave mode is not supported by Linux). [[APF9328]] (i.MXL) contains 2 SPI. == Linux configuration ==4 KB (648 words) - 16:40, 31 January 2018
- GPM stands for General Purpose Mouse server and is the mouse support for Linux on the console.1 KB (172 words) - 18:36, 15 January 2014
- The driver is included in linux menuconfig. $ make linux-menuconfig3 KB (387 words) - 10:49, 30 April 2020
- *[[ALSA]]: Advanced Linux Sound Architecture *[[Video_for_Linux]]: Video 4 Linux6 KB (828 words) - 18:28, 1 March 2017
- * Linux: Load tsc driver1 KB (169 words) - 11:56, 4 January 2010
- Linux 2.6.29, direct connection (cross-over cable); asked TCP window size of 16k, Linux 2.6.29, direct connection (cross-over cable); asked TCP window size of 16k,1 KB (179 words) - 15:21, 24 March 2010
- #REDIRECT[[Serial ports usage on Linux]]40 bytes (6 words) - 17:47, 15 January 2010
- ==Linux==918 bytes (140 words) - 00:03, 10 April 2018
- ...al RAM disk are filesystem images stored in RAM memory that can be used by Linux at a first step/rootfs during the boot process. They may be usefull if the final root filesystem is not ready after Linux boot and needs some manipulation before mounting it.3 KB (439 words) - 10:50, 27 July 2015
- SWIG can be installed in debian/ubuntu linux distributions as follows arm-linux-gcc -fpic -c example.c example_wrap.c3 KB (584 words) - 23:17, 8 September 2011
- [[Category: Linux]] ...'' and ''setenv''. It can be helpful to read and set these variables from Linux as well, for ex. to remote control some U-Boot processes like software upda5 KB (721 words) - 10:52, 14 September 2018
- ...ur board through the RS232 line. With it you can have access to the U-Boot/Linux console of your APF without needing to connect a keyboard/screen to the boa ...[[Serial_Transfer | Serial transfer]] page to know how to transfer file to linux with minicom.1 KB (197 words) - 16:28, 21 November 2018
- Linux video capture interface: v2.00 $ make CC=$ARMADEUS_TOOLCHAIN_PATH/arm-linux-gcc2 KB (324 words) - 18:55, 9 November 2010
- * Patch proposal on linux-media: ** 1rst try ? http://osdir.com/ml/linux-media/2009-08/msg00569.html1 KB (183 words) - 18:32, 20 April 2010
- The most used one on Linux is ''wpa_supplicant''; we will see here how to install and configure it.6 KB (822 words) - 23:33, 4 May 2023
- === Configure your Linux Kernel === $ make linux-menuconfig10 KB (1,376 words) - 18:11, 4 September 2013
- set(CMAKE_SYSTEM_NAME "Linux") set(ARMADEUS_CTC_PREFIX "arm-linux-")3 KB (413 words) - 01:45, 8 June 2010
- '''BusyBox: The Swiss Army Knife of Embedded Linux.'''826 bytes (121 words) - 11:51, 11 June 2010
- ussp-push is an OBEX object pusher for Linux, using the BlueZ BlueTooth stack.3 KB (455 words) - 16:03, 23 June 2010
- $ make linux-menuconfig $ make linux && make1 KB (187 words) - 18:11, 4 September 2013
- CXX=arm-linux-g++5 KB (641 words) - 21:27, 15 July 2010
- ELDER (Embedded Linux Development for Robotics) Project is a robotic team which participated to t ...nction open the device and create a socket, using the socketCAN module for linux.24 KB (3,993 words) - 12:24, 30 June 2010
- ...ce. Linux has an interface for it named joydev, to use it select joydev in linux configuration : $ make linux-menuconfig6 KB (822 words) - 18:17, 4 September 2013
- *[[ALSA]]: Advanced Linux Sound Architecture *[[Video_for_Linux]]: Video 4 Linux5 KB (674 words) - 09:37, 26 September 2010
- ** [[OPOS6UL]] & [[OPOS6UL_NANO]] support (U-Boot 2018.05 & Linux 4.17) ...d !!''' Indeed we have made some changes to NAND mapping to be able to use Linux vanilla kernels easily and this mapping is not compatible with the older on6 KB (866 words) - 12:24, 9 August 2018
- $ make linux-menuconfig $ make linux && make2 KB (289 words) - 20:39, 4 September 2013
- ..._Software_Installation#FPGA_firmware_installation|here]]) or directly from Linux as described herewith. Under Linux:1 KB (207 words) - 08:38, 27 August 2015
- Linux video capture interface: v2.00 * [http://www.spinics.net/lists/linux-media/msg04285.html Somebody already tried to push an OV9655 SOC driver mai4 KB (663 words) - 13:35, 7 February 2014
- ...ideo Class). The source of this driver is included in the current Armadeus Linux kernel. * UVC driver is not selected by default in the Armadeus Linux kernel, you will need to use the following procedure to install it:2 KB (283 words) - 20:41, 4 September 2013
- # wget -Ppatches/linux/2.6.29 http://www.armadeus.com/_downloads/apf27_PPS/software_patches/501-pp # wget -Ppatches/linux/2.6.29 http://www.armadeus.com/_downloads/apf27_PPS/software_patches/501-pp10 KB (1,521 words) - 09:42, 12 February 2015
- * [[Wifi|WiFi usage on Linux]] * [[Bluetooth|Bluetooth usage on Linux]]2 KB (181 words) - 15:08, 18 May 2015
- =====Linux===== There are some drivers you need to install in Linux Kernel to make IPSec work.18 KB (2,369 words) - 20:40, 4 September 2013
- * First select the driver for sp_vision_configuraton under linux-menuconfig : [ ]$ make linux-menuconfig2 KB (299 words) - 18:18, 4 September 2013
- With recent Linux kernel (> 2.6.3x), there is an abstraction layer meant to ease GPIO usage: ...]] - as explained in the [http://www.kernel.org/doc/Documentation/gpio.txt Linux documentation of the GPIO] - "that should be used instead of talking direc6 KB (876 words) - 10:46, 29 April 2019
- $ make linux-menuconfig Linux video capture interface: v2.002 KB (313 words) - 13:12, 22 January 2014
- ==Linux configuration== $ make linux-menuconfig4 KB (517 words) - 10:52, 3 October 2017
- {{Warning| Please ensure that you use the trunk version of armadeus (kernel linux-2.6.38.1 is required) before trying the instructions described on this page [[Category:Linux drivers]]5 KB (691 words) - 14:51, 7 July 2011
- The [[APF51]] Linux distribution can be found here: [http://sourceforge.net/project/showfiles.p Currently (armadeus-5.3) default supported Linux version for [[APF51]] is: '''2.6.38.8'''.7 KB (801 words) - 12:00, 13 January 2014
- ...trolled by the PMIC and are software programmable thanks to the LED API of Linux.3 KB (506 words) - 15:53, 18 March 2015
- == Write a Linux device platform source == Add the driver in your Linux configuration5 KB (791 words) - 15:44, 15 July 2015
- ...rared USB HID Remote on APF board. Some (but not all) are supported by the Linux kernel. ...to know the model of your USB device under Linux. Connect it on a PC with Linux running, open a console and type:4 KB (634 words) - 20:40, 4 September 2013
- ...t doesn't need to be cross-compiled but can be installed together with the Linux file system on the board. Reboot into linux6 KB (969 words) - 10:22, 8 June 2011
- inetd can be launched when Linux boot adding a script in ''/etc/init.d'' :1 KB (161 words) - 10:17, 16 May 2017
- #include <linux/gpio_keys.h> #include <linux/input.h>4 KB (601 words) - 16:52, 21 June 2017
- This description uses Linux kernel > 3.7. [ ] $ make linux-menuconfig2 KB (349 words) - 16:15, 25 November 2019
- selectprojecttree your_armadeus_directory/target/linux/modules/fpga/POD driver.selectprojecttree your_armadeus_directory/target/linux/modules/fpga/POD11 KB (1,644 words) - 14:30, 7 February 2013
- ...er to use the reduced version TinyX/Xfbdev, which is an upper layer of the Linux [[Framebuffer]].3 KB (335 words) - 11:40, 20 January 2023
- ...much as possible the a common strategy already used for Buildroot and the Linux kernel. *Software changes have to respect the U-Boot coding rules (same as linux kernel): http://www.denx.de/wiki/U-Boot/CodingStyle15 KB (2,370 words) - 10:39, 8 September 2013
- * a development PC running linux ...this, we will make use of ''qemu'', who allows to run foreign architecture Linux programs through emulation.17 KB (2,771 words) - 18:23, 8 October 2019
- Excerpt from Linux's Documentation/sysreq.txt:<br>805 bytes (132 words) - 15:42, 8 December 2011
- The APF28 Linux distribution can be found here: [http://sourceforge.net/project/showfiles.p Currently (in armadeus-5.3), supported Linux versions are: '''Freescale's 2.6.35.3''' (version by default) and '''vanill6 KB (633 words) - 13:47, 26 December 2013
- ...iew/DULG/UBootCmdGroupMemory#Section_5.9.2.8. U-Boot] or [[FPGA_register | Linux]]. To access these register with U-Boot or Linux, use the address given under the reference manual in WEIM register descript5 KB (750 words) - 17:14, 7 September 2021
- ...iew/DULG/UBootCmdGroupMemory#Section_5.9.2.8. U-Boot] or [[FPGA_register | Linux]]. To access these register with U-Boot or Linux, use the address given under the reference manual in WEIM register descript5 KB (758 words) - 09:33, 12 February 2015
- ...... Invalid configuration `x86_64-unknown-linux-': machine `x86_64-unknown-linux' not recognized configure: error: /bin/sh autoconf/config.sub x86_64-unknown-linux- failed2 KB (209 words) - 19:13, 16 March 2012
- ...28Dev kit. By default, [[Tianma_TM035|TM035KBH02 (3" one)]] is selected in Linux. To use the LW700 (7" one), under ('''2013.x+''') U-Boot declare ''extraboo ...tors J9 and J10 - Each functionality can be disabled by simply using "make linux-menuconfig" (implementation on-going)10 KB (1,444 words) - 19:53, 8 September 2016
